Is there anyway to create a gap in AEC extended wall in 3ds max. I know to create a gap while using doors and windows. But I wish to create a gap without any doors or windows. I do not want to use proboolean also, because I need the properties of Walls too.
Is there any modifier to create proboolean? Can we create a curved wall using AEC extended wall?
I want to create a profile/wall style or what ever you want to call it for a raised deck flooring for external decking. I am looking at the decking material only. Not concerned about the timber framing sub floor material.
View 1 Replies View RelatedI need to create a wall the has a profile (in plan view).
View 1 Replies View RelatedAny way to get a wall sweep that's set up in the type/structure properties to follow a wall if that walls profile has changed. For example, in the image below, I've split the wall and adjusted it's profile to create some cheesy angled parapet. How do i get my wall cap to follow along? I thought splitting it and changing it's height would work, but no. And if I change the profile without splitting the wall the wall cap just runs right through the wall, as if the profiel was never even changed.
View 3 Replies View RelatedI have a question about wall profiles. I want to make a profile on a wall so I can make Zinc Panels on the wall that are 10" X 20". I've attached a picture of what I'm going for. I'd like it to have a 1/2" spacing between them and with a joint depth of 1" and I'd like to do this is the wall type so that I can use this wall in multiple places rather than having it model-in-place. Anyway I have made a profile that is 1" X 10" so that it can become my panel profile. But when I go to add it to the wall as a wall sweep as I have seen people do I get hung up on how to make it tile up the wall and also I don't understand how to make the profile so that it is 20" wide. I have a screen shot of where I'm editing this too. Below is the link of the site.
View 8 Replies View Relatedi performed a proboolean on a wall, put the windows and door aec objects in and evertthing,.. i m tyring to put some brick texture on the wall. but the pro boolean deeestrooooys my uvs, and i cant do anything, cant unwrap can put a box uv modifier nothing looks good.. is there any remedy to this??? should i have used pro cutter or regular boolean?? is there a certain setting i should have used?? is there anyway to cut out the shapes for the windows and the doors without loosing my uv integrity?????
View 7 Replies View RelatedI am trying to modify a vertical structural wall in elevation view - change from rectangular shape to trapezoidal (to allow a flat roof to drain to east). Did south wall in one elevation; I chose the wall, and it was outlined in red. I was then able to drag the east vertical edge down by a foot, creating desired slope. I now go to another elevation to modify north wall the same way, but when I choose the wall, it comes up with a blue ball in the center of each edge, with little hash marks on either side, and won't let me modify anything. Also, when I choose the wall outline (with the blue balls), I can't get to wall properties.
View 2 Replies View RelatedAre ther good sources available for learning about modeling curtain walls- complex curtain walls in Revit?
View 1 Replies View RelatedFor a very long time I have missed to able to edit profile on a curved wall. It seems so basic and yet it has not been possible. So I was very pleased when it was pronounced that this basic option was finally possible in Revit 2012. Alas it is not. I am so very dissapointed because this is a basic feature wich should have been fixed years ago.
Any simple method to edit profile on a curved wall without having to attach wall top and buttom to invisible layers of floors and roofs ect.
i drew a curved wall. now when i select it revit doesn't give me the option of an edit profile button as it would with a rectangular/straight.
View 6 Replies View RelatedI'm tryin to create an an elliptical wall. 6" Thick.It needs to go from 48" at one end and lower to 36" as it sweeps around the ellipse. (It's only an arc of the ellipse and not completely closed).
View 4 Replies View RelatedI'm, trying to update my wall profile so that all of my interior walls have baseboard/molding on them. I've been successful in creating a wall profile with molding, but only on one side. Looks like this in plan view. (Molding is highlighted and only on one side.)So, I first try to update my wall profile like this:
And I either duplicate, or add another sweep to the wall, and make that "Exterior" as to be on the "other" side of the wall.However, after pressing "OK" and "OK" at the wall profile editing box, I get the following error box:
When I click on "Show", I'm shown nothing. When I click on "Enjoin Elements", this same box comes up no matter how many times I click on the "Enjoin Elements" button.
Having problems adding molding to both sides of their interior walls? Am I going about this the right way? Tried to smallify the actual .rvt file, but I can't get it down to an acceptable size for posting here.
I am working C3D 2012. I have a proposed alignment and profile design by another firm that I had to tranfer into C3D. I had no problem getting the horizontal alignment to display from a text file. I tried to do the same with the profile by using the 'create a text file and create the profile from file' command. I got the POB, PI's, and POE to display. I then defined the VC. I wanted to verifiy that the profile was indeed accurate compared to what we were provided. So I tried to execute a profile report PVI Station and Curve Report - I keep getting an error that "No FG profiles in dwg".
I know the Proposed profile is indeed set to proposed in the properties. I have noticed that the icon next to the profile I create from the text file is different than the profiles created from scratch.
Is there a way to convert this profile to be recognized as a FG profile?
Intel Core i5-2500K CPU @ 3.30 GHz
8.00 GB
64-bit
The intersection wizard makes dynamic EOP profiles based off of the cross slope from the centerline. Well the intersection tool doesn't always work with funky intersection layouts. Is it possible to manually create a dynamic EOP profile based on the cross slope from the centerline profile?
Civil 3D 2012
Windows 7, 64 bit
We have an engineer who is taking an existing surface and wants to show a proposed road 2" higher than existing.
I told him to simply adjust his assembly for his corridor to account for the 2" difference, but the County agency needs to see a profile.
My questions:
1) Is there a way to easily copy a profile made from a surface and "convert" it to a proposed profile? If we copy and explode, it turns into hundreds (thousands?) of tiny pline segments and it would be a mess to convert all those to a profile 1 by 1. If we make the corridor, and choose "profile from corridor", we do not have an option that could be used to represent the centerline.
2) Other than loss of dynamic updating), would it make sense to adjust the assembly so the top surface would be accurate, then copy the profile, explode the copy to a block and simply shift that (as essentially basic linework)?
I just created a wall sweep on a wall , but I noticed the sweep doesn't adjust to the wall profile, please see the second floor wall in the attached image. Is there anyway to make the sweep adjust to the profile of the wall automatically?
View 2 Replies View RelatedI'm trying to create a Tiled Skirt (150x150mm) profile or pattern to be used as Wall Sweep. Is there anyway to create this profile as the Family Template: metric profile (wall hosted) only allow me to create a 2D profile.
I would prefer to avoid detail lines or Filled region to get the tiles shown as I need to schedule and quantify this element.
I made a bench cushion few weeks aback but it was a straight cushion, now i want a curved one to match the same profile, i did as i have shown in the picture but with the curved one i want it thiner, how can i do this?
View 2 Replies View RelatedI'm building a test track to use on a driving simulator.I'm trying to apply banking to the corners. The track's path is a loft with it's path defined as a line, and the loft shape is a rectangle to represent the cross section of the track. I'm trying to apply banking to the corner by using a different shape part way along the loft... however, the result is that the track twists the wrong way so that the top of the track becomes the side and vice versa.
[URL]
Autodesk 3DS Max 2012 Student Version
It's possible in maya to sweep a profile along a closed curve? Like in 3DsMax, for example to make a window frame with a particular section profile?
View 1 Replies View Relatedhow to create a brick wall?
I wanna make someone breaking through the wall.
I am trying to create wall by faces of a Mass I modelled.
This is the Mass: [URL]
Everytime I try to create a wall by face of one exactly face, it accept Location Line: By Finish Face Interior only, when I try to change ANY other Location Line, it gives me a message error.
[URL]
And it is always from the SAME FACE highlighted at the picture.
The mass was made by the floors and top edges. I select all of the edges and create a mass from down to top.
All the other faces are ok and they accept the wall by face and let them change the Location Line except this one.
Is it possible to create the Wall family in revit?
View 5 Replies View RelatedI've been having an issue with autocad architecture 2013. For some reason it won't let me create a wall. I can click it but it doesn't want to actually create anything. It just gives me the selection tool. I downloaded the service pack and still doesn't work.
View 3 Replies View Relatedhow to create a wall schedule with areas. To find out how much plasterboard, paint etc. I need for a building.
View 1 Replies View RelatedHow to create curtain wall with Mullion and insert in to project.
View 1 Replies View RelatedI am trying to create a cornice using a wall sweep. I created the profile I need but when I load the profile and try to add the sweep to the wall Revit shuts down completely.
View 1 Replies View RelatedI am working in Arch Desktop 2011 and need to make a wall for a upper floor and roof line with different plate heights. See the attached drawing for explanation.
What I'm trying to do is create an upside down "V" wall to fill in this area. This is an as-built drawing for an existing house with an addition.
I'm trying to make a face look like it's pushing through a wall, a bit like in A Nightmare on Elm Street:
View 1 Replies View RelatedI don't know how to create the secondary containment wall by civil3d.it's the same as creating the retainment wall assembly ?
View 2 Replies View RelatedI need to create an animation of a cloth banner attached to a wall. The bottom of the banner will be either held up, or rolled up. Then I want it to be released, revealing what is on the banner.
Are there any tutorials showing how to set up cloth using physX?