Photoshop :: How To Create Effect Of Face Pushing Through A Wall
Sep 23, 2013I'm trying to make a face look like it's pushing through a wall, a bit like in A Nightmare on Elm Street:
View 1 Replies
ADVERTISEMENT
Revit :: Can't Create Wall By Face
Mar 26, 2013I am trying to create wall by faces of a Mass I modelled.
This is the Mass: [URL]
Everytime I try to create a wall by face of one exactly face, it accept Location Line: By Finish Face Interior only, when I try to change ANY other Location Line, it gives me a message error.
[URL]
And it is always from the SAME FACE highlighted at the picture.
The mass was made by the floors and top edges. I select all of the edges and create a mass from down to top.
All the other faces are ok and they accept the wall by face and let them change the Location Line except this one.
GIMP :: Create Face In Hole Effect
Aug 1, 2011I would like to know the quickest way to create face in hole type photo templates. I was at Universal studios and was impressed by the speed they could create face on body images.
I am thinking it has to do with lasso select tool with a feather on edges > invert selection.
Also what is the quickest way to make the photo face match the original face color. (is there some kind of color select to do this?)
Revit :: How To Align Curtain Wall With Edge Of Concrete Slab / Face Of Wood Framed Wall
Dec 4, 2012I am trying to align the curtain wall with the edge of the concrete slab/face of wood framed wall (Core). I have tried to align and move however the whole wall moves as well as the edge of the slab. How I can move the Curtain wall leaving the other elements in place?
View 2 Replies View RelatedGIMP :: How To Create Face Coming Out Of Image Effect
May 15, 2013Basically I have 2 images, 1 is a texture background and the other is a face. I wanna create the effect that the face is blended into the photo just like in this one:
[URL]........
Photoshop :: A Face Morphed Into A House Or Wall?
Jun 23, 2006I want to do a similar image where the background 'becomes' the skin of the person in the foreground. In this image it's as though the house and the woman are each a bit of one another.
View 9 Replies View RelatedPhotoshop :: Wall Face Type Thing
Apr 1, 2006I'm trying to make an effect I saw on a moive, the name of it is Holloweentown 2: revenge of kalibar. In that, there is a part where a boy's face is in a brick wall, you can see his face. How can i make that? The lines of the brick wall follow every curve of his face, its like 3d, I hope you understand what I mean. I tried that with the displace filter, it doesn't work that good. I can't find a pic of that anywhere either.
View 1 Replies View RelatedRevit :: Edit Wall By Face
Feb 25, 2014I would like ask if I create wall from mass by using wall by face. However, the walls have slope and they are not connected to each other.
(Please see the picture) When I would like to edit wall only option shows in modify is update to face. Do they have any way to edit this wall as normal?
Revit :: Split Face On Curve Wall
Oct 12, 2013I tried the tool Splite Face use a curved wall,But only on straight surface is activated.
View 2 Replies View RelatedRevit :: Draw Railing Over The Wall Top Face
Nov 27, 2013How to draw a railing over the top of a wall? when the wall's top face is irregular. See the attached image.
View 1 Replies View RelatedRevit :: Calculation Of The Double Face Of Wall?
Mar 11, 2013Calculation of the double face of a wall,
I’m wondering if there is a way to calculate the area of double face of a given wall. For exam, say that we have a wall of 4x4x0.1 meter then the area of one face is 16m2 while the double face is 32m2. Does the Revit calculate the double face of a given wall?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD Architecture :: Drawing Wall Face To Centerline Only?
Aug 6, 2011I'm drawing individual guest rooms for a hotel that I would like to xref into the main floor plans. The walls between the rooms are 8" wide. I would like to only show half the width of those walls (4") so when xrefed againt another guest room in the main floor plan, the total width would be 8". But I would like for the one side of the 4" wall to appear as a centerline on the individual plans, but at the same time, be able to shut the centerlines off on the main floor plans. I'm new to ACA 2012 and perhaps I'm going about this in the wrong way.........?????
View 8 Replies View RelatedRevit :: Creating Surface In Conceptual Massing And Applying Wall By Face
Aug 9, 2013When I create the surface in conceptual mass and bring that in revit project and apply wall by face I see interior face of wall going exterior.
Can this be set in conceptual massing while creating surface so that when I apply wall by face interior face remains interior.
AutoCAD Architecture :: Exterior Wall Face With Multiple Finishes At Different Angles?
Oct 9, 2013How can I have an exterior wall face with multiple finishes at different angles?
View 6 Replies View RelatedRevit :: Create Roof With Same Line On Top Roof Face And Vertical Side Face?
Nov 4, 2011creat roof with same line on top roof face & roof vertical side face?
View 2 Replies View RelatedPhotoshop :: Damaged Wall Effect?
Oct 11, 2008I've been searching for a damaged wall effect that I can create in photoshop. I'd like it to be an indoor wall, as if it's got plaster falling off and has been damaged by water... that sort of thing!
I'm trying to make a picture that looks like it is a wall inside a house that has been damaged in some way or other.
Revit :: Trimming Wall To Roof / Making Horizontal Holes In Walls Created From Mass Face?
Dec 29, 2011I would like to know whether it is possible (and how) to trim a wall that was generated from mass face to a roof (also generated from face mass) or/and make a horizontal hole in it. The wall itself is not straight or curved, it shifts outwards from the building from base to top (still in an elevation it looks like rectangle).
View 2 Replies View RelatedPhotoshop :: Relief Effect For A Brick Wall And Anything On It?
Aug 9, 2007I want to make a wall with some relief.. I dont want it to look flat or anything, but with some depth between the bricks. Its from a 3d view so it would not look nice if it were flat. I dont know how to get this effect though..and moreso..I have some graffiti brushes for the wall that need the same kinda brick relief effect (cause its sprayed on the bricks of course.. is there any way to create this as a style, brush, pattern or whatever...?
ive tried some wall brushes, but they dont give that feeling of depth..
Photoshop :: Normal Blend Mode Saturate When Pushing Contrast?
Aug 17, 2006I thought with normal you would not get any effects, but in fact, if you boost contrast on adjustment layer and keep at normal you get huge saturation boost -- unless you change to luminosity. So normal is not neutral?
View 5 Replies View RelatedPhotoshop :: How To Achieve Effect Of Half Face Covered With Mud Mask
Jun 4, 2012I really need to achieve this effect of half face covered with a mud mask like in the picture attached below
and it has to be a very realistic effect. But no matter how much i tried i don't manage to get it right .
Photoshop :: How Do I Get This Effect? [Hedcut, Engraving, Wall Street Journal Look]
Sep 29, 2008How do I photoshop my images to look like this?
View 6 Replies View RelatedPaint.NET :: Pale Face Effect - How
Jun 9, 2012I have been obsessed with this effect, but have never been able to manage it (at least not on pictures of me). Apparently it's not a secret, because people have figured it out, like in these two album covers I have attached. (Fallen by Evanescence and Burlesque) Now, I also realize it's possible that Photoshop may be the only program that can achieve this (with the masking tool maybe?) and Paint.net can't. I just need to know these things. It's difficult for me to attempt, how to phrase my question without photos.
View 1 Replies View RelatedCorelDRAW X6 :: Pushing Objects To Layers Before Exporting To PSD?
May 27, 2013The issue is that I have 3 machines I have designed with more that 80 parts each that I wanted to pull into Photoshop (they will be part of a web site) with layers so that I can texture them further. Is there a way (script or built in) that will put each object onto its own layer? Creating layers and drag/drop is going to kill my project time.
I found one plugin that is meant to do it but errors out in CorelDraw X6 x64. Scatter to layers, was the name I think. I'm sadly completely useless at any thing code related so I can't even edit the one I found to fix the errors.
This isn't an error but just a cross compatibility issue. Corel should look at adding the "treat objects/groups as layers" in the PSD export dialogue.
3ds Max :: Put Glow Effect On Inside Face For Full Length
Jul 11, 2012I have a series of tubes joined end to end to produce a long tube in several sections. I need to put a glow effect on the inside face for the full length, but have a graduated effect so that one end is glowing very hot, and then have a smooth transition to warm at the other end.
I tried applying individual glow effects to each section but the stepping is obvious.
I then tried adding a glow effect with a Gradient map added to the "Additional effects" on the options tab. This didn't seem to do much and there don't appear to be any parameters to control the gradient.
What is the best way to achieve the desired effect?
Photoshop :: How To Create 'face Shadow'
Jul 20, 2009how would i go about creating shadow on a persons face. look at this example, how was this achieved?
View 4 Replies View RelatedCorelDRAW Premium Suite X5 :: Bevel Effect - Text Face Color Changes
Dec 7, 2011I have encountered a problem with the bevel effect of corel draw that I can't seem to resolve. I have a vector image and I convert to curves. Click on effects/bevel/soft edge bevel. I set my distance, I set my shadow colour & light colour and when I apply the bevel it changes the face colour to a murky combination of the original vector colour/shadow colour & light colour. I do not want to change the face colour of the text in any way.
View 7 Replies View RelatedPhotoshop :: Create A Brick Wall
Jun 2, 2006how to create a brick wall?
I wanna make someone breaking through the wall.
Photoshop :: Create Blue Red 3D Anaglyph Image That Has Lensflair Face?
Jul 28, 2012I am trying to create a blue red 3d Anaglyph image that has a Lensflair face, how do I select the lensflare and make it look good?
View 8 Replies View RelatedPhotoshop :: Combine Smaller Pics To Create A Famous Face
Nov 9, 2005Anybody seen those pictures made of a lot of smaller pictures that combined together creates a famous face or whatever image you want?
I'm looking for the sofrtware for Mac.
Photoshop :: Create Image Of Face Extruding Through Chain Link Fence?
Jun 19, 2013I am trying to create a image in Photoshop. I'm trying to make a face extruding through a chain link fence. I tried using displacement map but either I'm using it wrong or it is the wrong tool for the job.
View 9 Replies View RelatedMaya Modeling :: Create New Face Between Vertices
Nov 20, 2010I worked for some time with the free program blender to create my scenes and objects. Because I want to study the subject 'Technical Directing' I started learning how to work with Maya, the more "professional" software.
Although I read through the considered topic of the GettingStarted tutorial, I've still a question to you:
How can I create a face between already existing vertices? This would really improve my workflow.