Photoshop :: How Do I Get This Effect? [Hedcut, Engraving, Wall Street Journal Look]
Sep 29, 2008How do I photoshop my images to look like this?
View 6 Replies
ADVERTISEMENT
Photoshop :: How To Create [Engraving] Effect?
Apr 7, 2008how to create effect like in paper money ilustration.
View 1 Replies View RelatedAutoCAD Inventor :: Engraving Text Outline Into Solid With V Shaped Engraving Bit?
Jan 12, 2012Most engravings into solids are done in real life with a V shaped engraving bit along a text outline. Having come from a very dated Inventor 7, I was hoping my new Inventor Professional 2012 edition would be able to tackle this with ease. I thought the embossing of text would provide what was needed, but the emboss feature only seems to engrave the solid of the text and not an outline of text. With no luck there, I decided to import an AutoCAD text outline onto the surface of my model and try to sweep the tool shape over the path. I’ve been successful only with text that is composed of straight lines. Any text shape with an arc or line segments is frustrating me like crazy.
I’ve attached a file showing my successful engraving over some letters of the text. This is my desired output.When trying to sweep the tool path along the “R” in the model, an error comes up saying: The attempted operation resulted in the creation of a self-intersecting surface. Try with different inputs.
When trying to sweep the tool path along the “C” in the model, it actually displays a preview of the end result; however, a different error comes up saying: The attempted operation had problems trimming and discarding faces. Try with different inputs.
AutoCAD Civil 3D :: Labeling Inlets In Street Profiles To Reflect Street Alignment Stationing?
Sep 28, 2012I've created a network of my stormsewer (which means the stormsewer lines are all on different streets) and added the inlets to my street profiles.
How do I get the profile structure labels to reflect the stationing from the street alignments?
Photoshop :: Damaged Wall Effect?
Oct 11, 2008I've been searching for a damaged wall effect that I can create in photoshop. I'd like it to be an indoor wall, as if it's got plaster falling off and has been damaged by water... that sort of thing!
I'm trying to make a picture that looks like it is a wall inside a house that has been damaged in some way or other.
Photoshop :: Relief Effect For A Brick Wall And Anything On It?
Aug 9, 2007I want to make a wall with some relief.. I dont want it to look flat or anything, but with some depth between the bricks. Its from a 3d view so it would not look nice if it were flat. I dont know how to get this effect though..and moreso..I have some graffiti brushes for the wall that need the same kinda brick relief effect (cause its sprayed on the bricks of course.. is there any way to create this as a style, brush, pattern or whatever...?
ive tried some wall brushes, but they dont give that feeling of depth..
Photoshop :: How To Create Effect Of Face Pushing Through A Wall
Sep 23, 2013I'm trying to make a face look like it's pushing through a wall, a bit like in A Nightmare on Elm Street:
View 1 Replies View RelatedLightroom :: How To Delete LR2 Catalog - Data And Journal Files
Jan 26, 2013I'm using 3.6. Can I delete LR2 cat, data and journal files?
View 4 Replies View RelatedPhotoshop :: Engraving?
Aug 22, 2007i been trying to engrave stuff with photoshop like write my name in a peice of metal or put something in the ground idk how to come about it i have tryed i just dont know how.
View 3 Replies View RelatedPhotoshop :: Engraving Into Phongian Stone
Jan 21, 2005I'm designing a poster for a play and loved the stuff I saw in the stone wall forum and I'd like to do something like an ancient engraved stone (egyptian era ) You know, chiseled into the stone. I'll post what I have but I need some advice. Is there a way to get the engraving to show up better? I used the emboss mask but I'm just not satisfied. Any ideas?
View 2 Replies View RelatedPhotoshop Elements :: How To Reduce Street Light Glare
Apr 9, 2013I have some evening sunset photos, but there is a lot of glare from street lights. How can I reduce that
View 1 Replies View RelatedPhotoshop :: Create Street Elevation Using Series Of Screen Shots
Mar 4, 2013I'm trying to create a street elevation using a series of screen shots taken from Google maps. Here an image of the type of thing I'm trying to achieve:
You'll noties that the image is flat.. Is this something I can achieve using the perspective tool? If so, do I change the perspective of all the individual images and then merge them? Or do I merge them, and then change the perspective in sections?
CorelDRAW X5 :: Laser Engraving
Mar 4, 2013I just upgraded from x4 to x5 and have had a couple issues with how the new install of x5 is working with my Laser Engraver (Epilog Legend 36EXT 120w)
1) When I used to run jobs at 300dpi the quality was fine (with some pixelation near the edges of the engraving) now when I engrave at 300 dpi I notice that the image is dithered and looks "polka dotted", Is there a way to fix this?
2) When I send over an image with a C:0 M:0 Y:0 K:0 white background, whereas it used to see this as "No not laser this" space, now it will laser the actual background as a percentage of black (which is not much, but it still does engrave and ruins the product as the box ends up being visible) I know that I can change the 0 0 0 0 white to a transparent and that will fix the issue, it's just that my jobs are all saved with the 0 0 0 0 background and if I forget to change to transparent, I end up ruining items. Is there a way I can define to Corel not to print white?
AutoCad :: Text Engraving In R14?
Oct 21, 2012I’m using Acad R14 and made the control panel for my cnc with various square / round openings for the pushbuttons and the letters describing the function of each button. The control panel is a piece of aluminum 8.5”x21”x1/8” and includes openings / letters for 16 buttons.
Everything turns out good but have problem engraving the letters because the tool takes more steps than necessary to engrave each letter; for example to do the letter “O” it does the top part and then it does the bottom part and normally this should have been one operation.
I wonder if there is a setting in R14 to optimize the text or perhaps a font that is better for engraving than others. Now I’m using either Arial or Verdana 1/4" high
In addition, when I export my file to DXF, the options are ASCII or Binary and I choose ASCII and the Decimal Places range is 0-16 and I choose 6.
Paint.NET :: Pink Floyd / Wall Paint Effect?
Feb 6, 2014There's a certain movie poster for Pink Floyd: The Wall. Here's that iconic image:I want an image of mine to look like the paint splatters like that. Attached is the regular image.
View 3 Replies View RelatedAutoCAD Inventor :: Engraving On A Sphere
Apr 6, 2013I have a sphere which I'm able to project on a sketch of smaller circles which I'd like to engrave over it's surface, yet I want each of them to be perpendicular to the surface of the sphere in each point. Emboss doesn't do the trick, it just makes the engraving perpendicular to the plane.
View 9 Replies View RelatedGIMP :: Engraving Designs Into Textures?
Jan 31, 2012how to engrave a design into a texture in gimp like this tut for photoshop found here. [URL]
View 7 Replies View RelatedCorelDRAW X3 :: Using With Laser Engraving Machine To Cut Paper
May 20, 2013I am trying to cut paper on my laser engraver from a design on X3. It works but the engraver is cutting out the design. I want it to cut out the background and leave the design intact. I know this can be done and there is probably some very simple thing I am overlooking but I just cannot seem to wrap my brains around it.
For this to work how I want it, I have to change the X3 design to have a "negative" effect, as the engraver recognizes the black so background must be black and the actual design left white.
I tried to convert my design to a bitmap, but then it loses integrity and lines become pixelated. So other than this I am not sure how to get the background black.
AutoCAD Inventor :: Emboss Failing For Engraving
Oct 2, 2012The subject basically says it all. I am trying to emboss two words onto a solid model. Unfortunately it keeps failing. I am copying this model off of U-Tube models "LED LAMP"
Try and use the emboss feature and engrave the words "LED LAMP" On the centre of the top of my solid model part. Top View reads vertically going up the way.
Please edit part 8. Then start the Emboss process. 1/64 = Depth. Flat White colour. Following the video on youtube they use engrave from face then reverse the direction the arrow points towards the model. Then OK. That's the way I am showed it and I can't get it to engrave.
Revit :: How To Do Walkthrough Down A Street - Adding More Frames
Sep 29, 2011I am using Revit 2012 and I am trying to do a walkthrough down a street. I had 1000 frames and 5 fps because we want it to move really slow... but with 5 fps it is choppy. So I tried adding more frames but when I export it I can an error message when I try to play the file saying "Windows Media Player encountered a problem while playing the file".
I am not sure what I am doing wrong.. is there a maximum amount of frames you can use?
AutoCad 3D :: Creating Street Surface Model?
May 25, 2012I am trying to create a model of a city street surface using Autocad 2013. I think that perhaps the "network" surface command might work. Although the surface of a street looks simple, it is quite complex because of the need to drain the street of water. The corners are particularly difficult because the surface needs to be a continuous smooth curve while at the same time changing the direction of the surface slant.
I have attached a jpg of a model I created in Maya. I can export this to Autocad, but it is not particularly accurate and I need to create the model in Autocad at my job where they do not use Maya.
AutoCAD Inventor :: Emboss For Engraving Can't Work - 2012?
Oct 2, 2012The subject basically says it all. I am trying to emboss two words onto a solid model. Unfortunately it keeps failing. I am copying this model off of U-Tube models "LED LAMP"
How to use emboss feature and engrave the words "LED LAMP" On the centre of the top of my solid model part. Top View reads vertically going up the way.
save it and send it back or explain why it keeps failing.
edit part 8. Then start the Emboss process. 1/64 = Depth. Flat White colour. Following the video on youtube they use engrave from face then reverse the direction the arrow points towards the model. Then OK. That's the way I am showed it and I can't get it to engrave.
AutoCAD Map 3D :: Street Labels Disappear On UCS Rotation When Not World
Sep 10, 2013When I am in the World _plan view everything appears fine. When I use _plan to orient the view to a custom UCS the labels disappear.I'm using a Dell
Precision T3600 with 8 Gig RAM dual 2.8GHZ processor
Windows 7. Autocad Map 3D 2013 64-bit
NVIDIA Quadro 600 graphics card.
AutoCAD Map 3D :: Dynamic Annotation - Street Names Over Polylines
Feb 21, 2012I'd like to use dynamic annotation to get street names for a community based on US Census TIGER data. How to get the text rotated to be along the street centerlines. What I've done is to take the TIGER edges, select the roads with assigned names and map imported them. now when I define the annotation, I can use an expression for the rotation angle, but is there a way to extract the angle of a polyline in terms of first & last vertex (or even better, the angle at the midpoint)?
Otherwise, I'll manually rotate the affected labels, but it sure would be nice to automate things...
C3D 2011
Intel Xeon E5630@2.53Ghz
NVIDA Quadro NVS420 Dual Monitor
12GB Ram / Win7 Professional 64bit SP1
Revit :: How To Get Wall Sweep Set Up In Type / Structure Properties To Wall Profile Has Changed
Apr 12, 2012Any way to get a wall sweep that's set up in the type/structure properties to follow a wall if that walls profile has changed. For example, in the image below, I've split the wall and adjusted it's profile to create some cheesy angled parapet. How do i get my wall cap to follow along? I thought splitting it and changing it's height would work, but no. And if I change the profile without splitting the wall the wall cap just runs right through the wall, as if the profiel was never even changed.
View 3 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Construct Wall Centerline In The Middle Of Wall?
Sep 13, 2013i need a lisp that construct line between two lines of wall by selection called (Wall Centerline)
i attach example of what i want assuming that i will often isolate wall layer in the project to facilitate the task.
AutoCAD Architecture :: Make Cylinder Wall Or Closed Curved Wall?
Jun 3, 2013I can make a curved wall, now I need to make a "cylinder" wall or a closed curved wall. If a curved wall can be closed I cannot figure it out.
View 4 Replies View RelatedRevit :: Bulkhead Wall Join Skews Bottom Of Existing Wall
Jul 25, 2013I have to draw a bulkhead wall that connects to a full height wall and a gyp bd ceiling. This causes the entire end of the full height wall to skew in line with the butt joint above the ceiling level. I tried Wall Joins but all the options screw up the bottom half of the wall which needs to remain in line with the paired opposite. I also tried editing the sketch of the wall profile but Revit couldn't keep the elements joined. I tried trimming the two walls back together afterwards but the wall profile dominates and prevents a clean join above the ceiling.
Surely there's a way to have different kinds of joins at different heights?
AutoCAD Civil 3D :: 2012 Retaining Wall Assembly And Wall Height?
Jul 23, 2012I am using the RetainWallVertical subassembly with a created gutter subassembly attached to the wall and a DaylightGeneral subassembly attached to the gutter assembly. My cut slope parameter is set to hold at 1.5:1. I would like to use a target (feature line or alignment) to daylight to and have the wall height adjust accordingly. Problem, I am not able to use a target other than a surface for daylighting. I can use my existing ground surface, which I am daylighting too, but I can't adjust the target point.
View 2 Replies View RelatedAutoCAD Architecture :: Wall Style Creation (Window To Cut Only One Portion Of Wall)
Dec 7, 2011I'm attempting to create a wall style that has 2 components, a framed wall and a brick veneer. What I would like to do is have this wall react a certain way when I insert a window. Basically, I don't want the window to cut into the brick veneer, only the framing.
I have attached my attempt so far, and I have not figured out how to get the window to only cut the framed portion.
CorelDRAW Graphics Suite X5 :: Laser Engraving - Did Not Vector Cut Red Outline
Jan 18, 2012Use CorelDraw X for laser engraving? I did have X3 and just changed to X5 and need to cut Ovals in Flexi Brass and the file engraved fine, but did not vector cut the Red outline.
View 10 Replies View Related