I'm trying to create a street elevation using a series of screen shots taken from Google maps. Here an image of the type of thing I'm trying to achieve:
You'll noties that the image is flat.. Is this something I can achieve using the perspective tool? If so, do I change the perspective of all the individual images and then merge them? Or do I merge them, and then change the perspective in sections?
I am shooting a series of studio shots into Lightroom 4.1 using EOS Utility. I would like each shot to show up in the Develop module with the same cropping for each. When I set the crop and lock it, the next shot defaults back to the default or entire image area. Is there a way to create a Custom crop and have LR crop each image as it is imported from EOS Utility?
View 9 Replies View Relatedhow you all post screen shots, I'm an aide for my graphic design teacher and he asked me to write a tut on a simple animation i made. Problem is, the people I'm writing it for have never used image ready, I know it would help them if I added in screen shots, so they could see exactly what I meant, is there some program for this or I am I just not getting it?
View 2 Replies View RelatedI see often in forums and tutorials where the authors have pasted PS screen shots of various boxes from the palletes. How does one do these print screen of portions of the whole screen?
View 3 Replies View RelatedI want to use screenshots of websites in a web based portfolio. The images should be about 200px * 300px, or so. I'm having a hard time producing consistent results when cropping. I can do a screen shot of the entire screen for all of the sites and change the image size. The issue with this is that the shots are so small that the detail of screenshot is lost. This creates a very low quality image.
I tried to solve this by cropping the screen shot to a only feature a portion of it which would produce a more "artsy" looking image that would show the details more clearly. It was difficult to produce images that were sized consistently. There was no way to know what the exact size of the cropped image was.
Can I define a size for a mask and then apply it, or reverse it, to have a clearly defined size?
I have been trying all morning to get Photoshop CC to open some screenshots I took, something that I've normally had no problem with. Any way I try to open the files (dragging them to the icon in my dock to launch Photoshop, openening Photoshop first and then going to File -> Open and opening them) causes PS to crash. This happens with old screenshots and new screenshots.
I just got a new computer over the weekend and have gone from Snow Leopard to Mountain Lion. I'm not sure if the issue is with OS 10.8 or Photoshop CC 14.1.2?
I've created a network of my stormsewer (which means the stormsewer lines are all on different streets) and added the inlets to my street profiles.
How do I get the profile structure labels to reflect the stationing from the street alignments?
I have just downloaded and installed Paint.NET today; is it possible to capture screen shots?
View 8 Replies View RelatedI used to use Paint shop pro, years ago and it had a nice little screen shot function. Does paint.net do this as well?
View 5 Replies View RelatedI have about 2500 screen shots in png-format. I need to convert them all into b/w-pictures. How could this be done easily? Furthermore (but I guess that will be the issue in another list), I will have to run all these screenshots through an OCR-program. So what would be the best output-format for these screen shots?
View 3 Replies View RelatedI want to create a panoramic photo out of three shots , how do i merge them?
View 1 Replies View RelatedI am trying to create an elevation label that will give me the spot elevation followed by the letters "TC" and then on the line below subtract 4 inches from the elevation followed by the letters "BC". It's easy enogh to add the letters but the simple equation of elevation - 4 inches eludes me.
View 3 Replies View RelatedI am trying to create a block that polar arrays the street lamp, but every time i try i just move the grip for it, is there something i am missing?
View 8 Replies View RelatedHow do I use Photoshop Elements 11 to create an animation from a series of drawings?
View 1 Replies View Relatedhow I can create a series of hexagonal pillar.
View 6 Replies View RelatedI have collected points across a 500m distance with easting, northing and height values. This line of points is measuring a stepped slope of a field.
I want, if possible, to create a profile (something that looks like a slice of the slope, so that the steps and profile of the slope is clear.
Can this be achieved? Will you be able to guide me through the process?
I'm trying to create a series of sphere images that are to be used as an animation, whereas in my case I have a transparent background layer and a layer containing a sphere. Then I want to add a 15 degree rotation for each new image. The problem is that every time I select the rotate tool and click on the image to enter the value, the sphere is moved slightly.
View 3 Replies View RelatedI'm using the script export-selection.scm to create a series of PNG files from an existing image. It works fine but I find the fact that it saves the file to a name that it constructs (based on the .xcf file loaded, and whether it is saving a one layer or visible layers, etc) really slows me down, as I have to bounce between gimp and explorer to rename each output file after every save.
I looked at the source to see if I could tweak it so that the filename it created was unique, but I must have missed a crucial episode somewhere, because I couldn't get past first base.
Here's the candidate line from the script:
(outputName (string-append imageNameNoExt "-sel"))
..so you get a filename of MyGimpImageName-sel.png. What I want to do is create filenames called MyGimpImageName-sel-001.png, MyGimpImageName-sel-002.png etc.
An alternative would be to add an edit box to the dialog to allow you to specify the filename.
On a related subject, is it possible to set up a key binding to execute a script? If this could be done, I could roll a version of the script that skipped the dialog altogether and just used the last settings. In combination with the unique filename mod, this would speed up the job considerably.
I need to create a series of "trays" that are in the shape of letters. I am having some success with certain letters, but zero success with others.
I am creating these letters using a curve brought in from illustrator, and sweeping the profile that I want to use around the curve to create the outside.I am then using presspull to create the base of the tray.
However, sometimes the sweep command will simply say "unable to sweep 1 selected object" with no explanation as to why.
Sometimes I will get the shape that I want, but it is facing the wrong way, and I cannot fix it. Other times it will simply stall and then delete both the curve and the profile.
I am currently creating a series of dynamic blocks in order to create tabletop conveyors fro plat layout. I am using AutoCAD 2009 and am currently having issues making the turning sections. I know this is very simple using AutoCAD 2010 as there are geometric constrains available.
The curved sections must be able to have the inside thickness adaptable, the wall thickness must remain 1/2" thick, and the corner sections must have a 30, 45, 60 and 90 degree radii on them (although allowing any angle would be ideal). I was going to use visibility states to achieve the different angles as this seemed the easiest way to do this.
Attached is the basic 90 degree corner with an inside width of 4.5" with leaders labeling the areas that must be adaptive.
Is their a way to create a spot elevation in AutoCAD LT 2013?
View 1 Replies View RelatedWhat is the setting that will keep the last elevation entered when creating points?
View 0 Replies View RelatedIs there anyway to create a point from the coordinate and elevation data listed in a section inquiry panel (see attached)?
View 3 Replies View RelatedI created a new surface, pasted my OG surface into it, set the build to exclude elevations less than and greater than but my surface still is showing every contour range. I want to only show contours at elevations of 371.5 and 370.5
Is it because it's a pasted surface?
I have some evening sunset photos, but there is a lot of glare from street lights. How can I reduce that
View 1 Replies View Relatedhow to get 2013 C3D to create a large watershed with a big elevation drop? Arcview can do it, but I bought the new version of AutoCad, which meant a new computer, instead of the Arcview extension and I don't see it happening.
View 9 Replies View RelatedI'm new in Civil 3d, just learning by myslef by following tutorials, I've a provlem, after creating existing profile, when I'm going to create design profile I want to draw tangents(VIPs) on my desired chainages and elevation by given command, specify start point and I write 0,376.00 0 means chainage 0+000 and 376.00 is elevation but civil 3d shows a message "point is ouside profile view try again.
View 4 Replies View RelatedHow do I photoshop my images to look like this?
View 6 Replies View RelatedI am create the stron network. I want structure profile elevation. How to create expression in structure reference alignment profile elevation.
View 9 Replies View RelatedI am trying to create a property definition that will display the elevation of a space object. I looked through the automatic properties and did not find anything that looked like the elevation.
I have tried the following but was unable to achieve any success.
RESULT="--"
On Error Resume Next
Set AcadApp = GetObject(, "AutoCAD.Application")
Set Obj = AcadApp.Activedocument.Objectidtoobject("[ObjectID]")
RESULT = Obj.elevation
That formula does work if i swap elevation with say height, width,length or any of the properties found in the automatic property list that are a single word. I know the elevation is there I just don't know how to access it.
Is there a way to add elevation labels at any position on a feature line without having to create a surface?
View 9 Replies View Related