I'm trying to create a series of sphere images that are to be used as an animation, whereas in my case I have a transparent background layer and a layer containing a sphere. Then I want to add a 15 degree rotation for each new image. The problem is that every time I select the rotate tool and click on the image to enter the value, the sphere is moved slightly.
View 3 RepliesHow do I use Photoshop Elements 11 to create an animation from a series of drawings?
View 1 Replies View RelatedI'm using the script export-selection.scm to create a series of PNG files from an existing image. It works fine but I find the fact that it saves the file to a name that it constructs (based on the .xcf file loaded, and whether it is saving a one layer or visible layers, etc) really slows me down, as I have to bounce between gimp and explorer to rename each output file after every save.
I looked at the source to see if I could tweak it so that the filename it created was unique, but I must have missed a crucial episode somewhere, because I couldn't get past first base.
Here's the candidate line from the script:
(outputName (string-append imageNameNoExt "-sel"))
..so you get a filename of MyGimpImageName-sel.png. What I want to do is create filenames called MyGimpImageName-sel-001.png, MyGimpImageName-sel-002.png etc.
An alternative would be to add an edit box to the dialog to allow you to specify the filename.
On a related subject, is it possible to set up a key binding to execute a script? If this could be done, I could roll a version of the script that skipped the dialog altogether and just used the last settings. In combination with the unique filename mod, this would speed up the job considerably.
I am trying to create a movie with Corel Video Studio Pro with imported images that I have created in a 3D program! The framerate should be 24frames/second in the movie but it looks like
I can only get down to a image speed of 0.1 second or 10 frames/second by editing each images and then reduce duration time. Is it impossible to get the duration time to 0.0417 that is about a speed of 24 frames/second? If it is impossible maybe something for the wishlist to the future!
Next quistion is is it possible to somewhere in the settings change the duration time for images so you don't need to edit each images each time! It can be hard if you have over 400 images to edit!
I am trying create a flash animation where two images bump into each other and get squished on the ends that make contact.
How can I take an image and squish an end so it distorts up and down like it is being being pushed upon?
I have one picture of my office building and one picture of an airplane . I want to make the airplane fly and crash into the building and explode. If it's possible to make it in GIMP, how can i do it?
More importantly - how is this technique called? jpg animation? I'm new to graphic editing and don't even know how to name certain things or techniques, so i need some keywords for further research.
I'm also have adobe premiere elements, would this application be useful in creating such projects from pure jpg images?
I amm trying to animate a series of boxes... I want to change their height when they intersect another geometry... but I have a problem... I'm trying to calculate the distance of top face of the boxes and the other geometry with tape helper, but I can calculate only from center of the geomtery instead of the surface, that is was I searching...
Autodesk 3ds Max 2013
Windows 7 Home Premiuml 64-bit
Intel i7-2600K 3.40 Ghz - 16Gb RAM
Ati Fire Pro V5800 - NVIDIA Geforce GTX 580
I have a long and complicated road trip timelapse photo set I'm converting to an animation. That i've managed to sort out. However I also have some panoramas that i took here and there. I'm trying to take these panoramas (about 11 of them) into their component images,but with an overlap so that they will be in the animation appearing as a pan.
So I have about a dozen of these fairly wide images (2096 x 544 for one of them), and each of these i want to split into about ten images with a reasonable "overlap".
Given the amount of potential images, and my desire to have a smooth pan, making composite images manually wouldn't really work.
I've been using ifranview to bulk crop and resize images but i couldn't work out a way to do this so I switched to GIMP, which I'm not great with.
I've grabbed the guidelines every x pixels script and guillotine into layers plugin, hoping I could guillotine across multiple guideline "units" but all it's given me is dozens of vertical slices of the image.
I could merge and duplicate them but that would take ages.
At the moment I'm thinking my best option is to put the guidelines on and use selections to snap to guidelines and paste as seperate layers, then save all the layers as seperate files. However that still seems very slow and clunky and i'm wondering if there's a better way.
you know if it's possible to scale a image in differente sizes automatic. f.e. I have a image 1200x2000 an I would like to get 3 new images like 800x1000, 500x700 and 350x500 AUTOMATIC and without programming. It would be possibe with photoshop?
View 1 Replies View RelatedI have been working on a series of drawings for a catalogue. I am using solidworks, creating a sheet, all line thicknesses are changed to 0.05mm and then exporting the sheet as .AI. Every drawing I create is saved using identical settings.Out of say 10 only 3 of them are okay and can be edited as vectors. The rest seem to turn themselves into a series of images.
View 4 Replies View RelatedI want to export a series of images from a video, but only, say, one frame every three or four seconds. One out of every 90 to 120 frames of the video. Can this be done in AE, or do I need to do this in another CC program?
View 5 Replies View Relatedhow I can create a similar looking image, I want to learn to make my spheres into perfect circles and I want to learn how they do the effect at the top center to gather all the words tightly at the tip.
View 1 Replies View RelatedI want to place text in the bottom right of a series of images. The problem is not all images are the same size. Some are verticle and some are horizontal and even those arent all the same size. However, 99% are 768 high. How do I specify a certain margin from right and bottom so I can use the text action on all images regardless of image width?
View 3 Replies View RelatedSo I was oot and aboot yesterday and I took a series of pictures of a drummer in action. It was a rapid series, like five pictures covering five seconds of him rocking out. I want to combine all those five pictures into one ... "master" picture. My idea for the "master" picture is one single picture, where you can see his arm and body movements (and the drum cymbals moving) from all the five pictures.
That's probably a terrible way of describing it, but that's what I want to do.... I tried layering the pictures together as overlays, but while that combined all the images together, the end result was too blurry to make anything out.
I'm using a Javascript that will export as JPG a series of images from an AI file (that part is working fine), then rename them (that part isn't working). Writing and troubleshooting with Extendscript.
Trying to eliminate as many possible places to go wrong, I came up with the following:
myfile = new File; myfile = myfile.openDlg();
var newName = "NEW.ai";
myfile.rename(newName);
When run targeting Illustrator, it does nothing.
When run targeting ExtendScript, for some reason this blasts the file into oblivion, never to be found again.
I have a series of images taken with different settings and I want to quickly compare them at 1:1 in different areas of the image, center and corners. I have discovered that if I select the series I want to examine and then go to the first image and zoom that image to the position that I wish to when I use the arrow keys to move to each subsequent image will be shown zoomed into the same position
If I don't ever go to any of the other images and zoom anywhere this works just fine. The zoom location is remembered just for the first image. However, if i accidentally or deliberately zoom on one of the other images it will remember that zoom location forever which breaks the technique described above.
how to remove the remembered zoom location from an image like it is when you first import it into LR?
how I can create a series of hexagonal pillar.
View 6 Replies View RelatedI've created a process to make photos look like Lomography and can't find a way to save the process so that I can apply it to say, a whole album.
View 2 Replies View RelatedI am trying to standardize a series of photos, so that the distance between the eyes for each picture is 100 pixels. I can see the distance in pixels using the measuring tool, but when I try and scale the picture, the measuring tool disappears and I have to eyeball the distance. Is there a way to create a line or something between the eyes that I can then set the distance as 100 pixels to resize it? Or a way to see the distance in pixels while I scale the photo so I don't have to guess?
View 5 Replies View RelatedHow to create a halftone wrap on a sphere like this:
View 7 Replies View RelatedAny step by step procedure, to create semi-sphere in Inventor or how to draw semi-sphere ?I am unable get this semi-sphere, using all the "extrude", split" options.
View 9 Replies View RelatedI have a job to photograph 300 items and use lightroom to number each one with its own product code.
Then I need to add the barcodes to the images so the client can scan them
They have a spread sheet with all the data on but can a sript be written to do this action ???
I am looking for an action or preferably a way to create one, that takes a GIF file with multiple images (=animation) and puts all images side by side and saves it.
View 9 Replies View RelatedHow can i export a series of images in different aspect ratios to the same height?
I wish to make a slider callery for my website. all the images need to be 750 Pixels high, the width does not matter. I have a mixture of square pandscap and protraite images can i do thing as one export or do i have to do it twice? Once for long edge and once for shot edge?
I have collected points across a 500m distance with easting, northing and height values. This line of points is measuring a stepped slope of a field.
I want, if possible, to create a profile (something that looks like a slice of the slope, so that the steps and profile of the slope is clear.
Can this be achieved? Will you be able to guide me through the process?
Here's the effect I'm going for, maybe a bit more glow and lines do not need to arc like that: [URL]
And like this: [URL]
I'm having a couple of problems: 1) if I put the network lines on the map it looks too flat so I think I need to apply them to a slightly larger invisible sphere; 2) when I add a blur/outer glow to the lines they do not wrap cleanly on the sphere, they kind of break up and distort. Plain lines do not seem to have this problem but objects with effects do.
I'm trying to create a street elevation using a series of screen shots taken from Google maps. Here an image of the type of thing I'm trying to achieve:
You'll noties that the image is flat.. Is this something I can achieve using the perspective tool? If so, do I change the perspective of all the individual images and then merge them? Or do I merge them, and then change the perspective in sections?
I know there are many ways to model this but how would some of you go about it? Would you create a sphere then cut out a spline circle for the ports? Would you create a box then turbo smooth it out to a sphere?
View 4 Replies View RelatedWhen I try to create a document, Gimp finds my web cam, but not the twain driver. The scanner is a perfection 636U. When I click on "create>scanner/camera", it gives me a Twain.exe system error - error message that reads:
"The program can't start because PMDD32F3.dll is missing from your computer. Try reinstalling the program to fix this problem."
Some more info that might be useful:
If I go into epsonscan directly, it finds the scanner and scans just fine. I can export the image and open in Gimp just fine.
The laptop is a win7 machine. There are no Win7 drivers for the scanner. I am using some Win2000 drivers that I used to use in XP with no issue.
The PMDD32F3.dll file is in the Windows>System32 file
I'm at a loss on why epsonscan works itself perfectly, but not in Gimp like it does on my XP machine.
I would like to know what is the proper way to modify images for a website, for example for a wordpress featured image or for placing it anywhere in a post.
Should I scale the image to some pixels in width and height? Should I resize it? I am a bit lost with these issues.
What I'm trying to do is create images (PNG) that are populated with text values and images from a database. Something I could best describe as being like a mail merge. Can I write a Gimp script to do this? Let me give you some examples that demonstrate of what I want to do:
1 - Create randomly generated Lolcat images where I pull random cat images from a database and random funny text imposed in a layer on top of the cat image
2 - Create address labels where I pull names and address from a database and impose them on top of an image of the state I'm shipping it to.
3 - Create iconography for an e-commerce website that pulls from the product catalog to display the image with text of the category, product name, and size on top if it.