VideoStudio :: How To Create Animation From 3D Images
Jul 19, 2012
I am trying to create a movie with Corel Video Studio Pro with imported images that I have created in a 3D program! The framerate should be 24frames/second in the movie but it looks like
I can only get down to a image speed of 0.1 second or 10 frames/second by editing each images and then reduce duration time. Is it impossible to get the duration time to 0.0417 that is about a speed of 24 frames/second? If it is impossible maybe something for the wishlist to the future!
Next quistion is is it possible to somewhere in the settings change the duration time for images so you don't need to edit each images each time! It can be hard if you have over 400 images to edit!
I'm trying to create a series of sphere images that are to be used as an animation, whereas in my case I have a transparent background layer and a layer containing a sphere. Then I want to add a 15 degree rotation for each new image. The problem is that every time I select the rotate tool and click on the image to enter the value, the sphere is moved slightly.
Though I am a long time CorelDraw user I've recently download VideoStudio Pro trial. The problem I am having is importing a sequence of animation images (360 total at 30frames/sec) The images where render and exported from Lightwave3D (jpg)
The only way I found to import the images was through the capture button and that worked fine. Once that was done imported VS editor and exported to several formats...
the problem is the sequence is choppy and not smooth it is a wee bit choppy the 30 frames/sec imports fine but the final play back is not smooth as it should be. If I export directly to video from Lightwave the playback is smooth. I'd render direct from LW but LW is is a wee bit wonky at time when writing direct to video format. LW prefers direct to image then you would composite in a 3rd party program
I tried VS video at 60 frames, 15 frames that made no difference at all the same unsmooth playback
How do I import a sequence of images at 30/sec so then export so that the playback is smooth.
I am preparing a video of our dog and would like to have paw prints that move across the title clip. I thought I could do this in Painting Creator but not sure how to insert an image.
Considering the use of sequences of still images (e.g. created through vector software as Corel Draw), whether “VideoStudio Pro X4” is able to make the following kind of animation?
Apple Keynote Animation [URL]
If yes, which are the name of techniques/resources to be employed?
I've been getting my hands on a few models from different games (Such as the Spy from 'Team Fortress 2', and Mario from 'Super Smash Brothers Brawl') lately, all of which are already weighted properly... So I can simply apply IK's and begin animating in a matter of minutes...
However, I can't set up any of them with a HIK rig (To use with Motion Capture..).. I keep getting an "Invalid skeleton or no skeleton. Can't create new rig." error when trying to Create the HIK Rig (I can Characterize the skeleton with no problem though). I know that the mesh is binded already to the skeleton using skin clusters..
I want to create a whipping animation. But not just a simple one. My whip is a collapsed folding rule. So I motion captured me doing the whipping movement and imported that into 3dsmax.
As a folding rule does not expand in real life like that I thought about attaching a virtual weight to one end and connect the other end via link to the throwing hand. So the end of the FR is connected to a mass which makes it inert.
I'm currently evaluating the product. I like most of what I see, but I do have one major issue - animation of text. You can't use the transitions on the text because they effect the entire screen, not just the text, blacking out the main video. The text animations only have a few types that allow entry and exits. Which mean that the text can pop-up, but only disappear at the end. This seems to be a major oversite in an otherwise stellar product. I use pinicle now, which is nowhere near as nice in most aspects, but in pinicle I can slide text on and curl off or any other combo I choose. Way better.
I am thinking of purchasing VideoStudio pro X3, but I can't seem to find out from the website if it will do exactly what I need.
I want to use an image sequence of an animation created in Lightwave 3D, bring it into VideoStudio and then create a BluRay disc with it on. I am hoping to do this in one go rather than convert it to a movie file first.
Been messing around with Image Ready 3.0 for some time and have had some good experience making animated gifs...but only by adding to or subtracting from the layers of the same image.
How can I tween between 2 or more separate images?
I have one picture of my office building and one picture of an airplane . I want to make the airplane fly and crash into the building and explode. If it's possible to make it in GIMP, how can i do it?
More importantly - how is this technique called? jpg animation? I'm new to graphic editing and don't even know how to name certain things or techniques, so i need some keywords for further research.
I'm also have adobe premiere elements, would this application be useful in creating such projects from pure jpg images?
I can see make frames from layers, but with a many layered psd file of which I only have 5 frames I want to see how they animate, how do I tell the animate palette to make frames from just the selected layers ?
Surely this has to be an option, there are always going to be layers during an artwork build that are options or earlier efforts etc that you may wish to revisit, to have the entire lot dumped into animate is a pain. Its not obvious which they are when in there, layer names don't appear.
I'm trying to create a text animation to come in from right to left and then pause, but because it does not fill the whole width of the screen it only starts from the centre of the screen. How can I get it to enter from the edge ?
At the moment I am creating presentations in Microsoft PowerPoint and exporting them as movies and then into Videostudio. I am also using Powerpoint for written content, such as slides. This is fine for basic informational type videos but obviously it's very limiting.
Before I bought Videostuido I used Animoto for a while and that creates some very nice movements and effects. I'd like to be able to do the same. Recommend an entry level animation package?
I added a flash animation as an overlay track but cannot get it to extend further than the original animation length, I am trying to have the animation as a background throughout the video.
I want to create a repeating, pixel art GIF animation. The basic idea is nyan cat swapped for a spaceship, in my usual video resolution. Now I made all the assets, and I thought I can use the star animation as a sub animation, so I can tell it to appear in random heights, move from right to left and start at a random frame, so I made a GIF just for that. But I fail to see any sort of controls that let me do what I was planned.
What is the best workflow to create vehicle animation path for Civil View extension, when these path segments are not exported from Civil 3D, for example in intersections like in the picture of a simple case I attached. Do you create arcs in AutoCAD and then import them in scene, project them to road region surface and connect them to split corridor base lines, or you draw them directly in 3ds Max 2013?
I have created an object (Tube012) that i am trying to use as a rotational control mechanism / rig to move some vertices (morphed spline 012) through a series of progressive morph targets.
i have created morph targets that work as key framed morphs but when i change these to progressive morphs and try to drive with an expression nothing is happening.
The work i am doing is largely based on the great work of Ruramuq and Harvey from the thread "Rigging a wave (3D's Max)" Not sure why. I have file from Ruramuq and have tried to replicate his technique. Everything works well in his file so all i need to do is replicate. The answer is in here but i cant tell what the difference is between his and mine.
I want to create an custom parameter like "button" under my object parameters or in attribute holder and i want this button run a simple code/script for me.
for example: linking Box1 to Box2 $.parent = $Box002
I know how to work with "wire parameter" and "parameter editor" but the problem is that i cant find any way to tell them to run this script with that parameter.
I'm making a short animation on 3ds max design, it's supposed to be about 10 seconds, and I can't seem to find where I can control the animation speed. I render out the frames to AVI format, (abot 250 frames) but when I play the animation in VCL or any other mediaplayer, it seems to lack length completely - the timeindicator shows 00.00.00. I attached just a test animation, it's there but something's wrong..
I have a question about the ikHandle. When I create the ikHandle with the ikSCSolver, the handle is “L” shaped. Does the direction the lower portion of the “L” points towards, indicate the first axis of rotation order? Or does it mean something else?
why the create animated sequence (Make Preview) will often times freeze and get stuck on one frame even though the time is progressing? Quite often when I create my previews, it will progress to a certain point and the frame won’t progress and it will continue to create the same frame over and over even though the time slider is progressing through the animation. I’m using Max 2011 and 2012 but this has happened in 2009 and 2010. To fix it I have to keep a close eye on the sequence images and stop the preview to restart it at the point it stopped.
3ds Max 2013/2014 Autodesk Inventor & AutoCAD HP xw8600 Workstation Windows 7 64Bit Dual Intel Xeon 2.83 E5440 GHz 8.00 GB of Ram
I currently have a model made of a few different meshes (head, body, upper/lower arms etc...) which I have linked together. I primarily animated by rotating the joints of the model, but it just isn't cutting it anymore.
Is there anyway I can create a bone system that uses the meshes as the "bones"? I'd like to be able to do that so I can change the models for every part of the robot seperately in my game by changing the mesh associated with the bone. I've tried searching google and youtube but I'm not really sure what to search for.
