Paint.NET :: How To Overlay Series Of Images To Get One Combination Image
May 2, 2011
So I was oot and aboot yesterday and I took a series of pictures of a drummer in action. It was a rapid series, like five pictures covering five seconds of him rocking out. I want to combine all those five pictures into one ... "master" picture. My idea for the "master" picture is one single picture, where you can see his arm and body movements (and the drum cymbals moving) from all the five pictures.
That's probably a terrible way of describing it, but that's what I want to do.... I tried layering the pictures together as overlays, but while that combined all the images together, the end result was too blurry to make anything out.
View 4 Replies
ADVERTISEMENT
Apr 26, 2007
I am looking for an action or preferably a way to create one, that takes a GIF file with multiple images (=animation) and puts all images side by side and saves it.
View 9 Replies
View Related
Nov 11, 2013
I need to overlay a transparent image of a tablet over about 50 images from a folder - is there any automated way to do this? I can use either Photoshop or Illustrator
View 2 Replies
View Related
Jul 25, 2011
you know if it's possible to scale a image in differente sizes automatic. f.e. I have a image 1200x2000 an I would like to get 3 new images like 800x1000, 500x700 and 350x500 AUTOMATIC and without programming. It would be possibe with photoshop?
View 1 Replies
View Related
Jan 20, 2013
I have been working on a series of drawings for a catalogue. I am using solidworks, creating a sheet, all line thicknesses are changed to 0.05mm and then exporting the sheet as .AI. Every drawing I create is saved using identical settings.Out of say 10 only 3 of them are okay and can be edited as vectors. The rest seem to turn themselves into a series of images.
View 4 Replies
View Related
Sep 19, 2013
I want to export a series of images from a video, but only, say, one frame every three or four seconds. One out of every 90 to 120 frames of the video. Can this be done in AE, or do I need to do this in another CC program?
View 5 Replies
View Related
Jun 6, 2009
I want to place text in the bottom right of a series of images. The problem is not all images are the same size. Some are verticle and some are horizontal and even those arent all the same size. However, 99% are 768 high. How do I specify a certain margin from right and bottom so I can use the text action on all images regardless of image width?
View 3 Replies
View Related
Apr 12, 2012
I'm trying to create a series of sphere images that are to be used as an animation, whereas in my case I have a transparent background layer and a layer containing a sphere. Then I want to add a 15 degree rotation for each new image. The problem is that every time I select the rotate tool and click on the image to enter the value, the sphere is moved slightly.
View 3 Replies
View Related
Dec 13, 2012
I'm using a Javascript that will export as JPG a series of images from an AI file (that part is working fine), then rename them (that part isn't working). Writing and troubleshooting with Extendscript.
Trying to eliminate as many possible places to go wrong, I came up with the following:
myfile = new File; myfile = myfile.openDlg();
var newName = "NEW.ai";
myfile.rename(newName);
When run targeting Illustrator, it does nothing.
When run targeting ExtendScript, for some reason this blasts the file into oblivion, never to be found again.
View 3 Replies
View Related
Sep 27, 2010
I have a series of images taken with different settings and I want to quickly compare them at 1:1 in different areas of the image, center and corners. I have discovered that if I select the series I want to examine and then go to the first image and zoom that image to the position that I wish to when I use the arrow keys to move to each subsequent image will be shown zoomed into the same position
If I don't ever go to any of the other images and zoom anywhere this works just fine. The zoom location is remembered just for the first image. However, if i accidentally or deliberately zoom on one of the other images it will remember that zoom location forever which breaks the technique described above.
how to remove the remembered zoom location from an image like it is when you first import it into LR?
View 5 Replies
View Related
Sep 24, 2013
I have a job to photograph 300 items and use lightroom to number each one with its own product code.
Then I need to add the barcodes to the images so the client can scan them
They have a spread sheet with all the data on but can a sript be written to do this action ???
View 2 Replies
View Related
Dec 18, 2012
How can i export a series of images in different aspect ratios to the same height?
I wish to make a slider callery for my website. all the images need to be 750 Pixels high, the width does not matter. I have a mixture of square pandscap and protraite images can i do thing as one export or do i have to do it twice? Once for long edge and once for shot edge?
View 2 Replies
View Related
Nov 30, 2013
During 2014 I would like to create 'photo a day' video of myself, similar to this [URL] ........ I have no plans to inflict my work on the world via YouTube and the like, it is purely for my own amusement.
My question is a compositional/editing one. I understand how to take the stills and create a video from them using Windows Movie Maker, not the best software but sufficient for my purposes.
In the link above the young ladies eyes and nose stay at a (mostly) fixed point in the frame, I find this makes for a better video when all the stills are run together. The problem I have, is, when I take stills of myself my nose and eyes are at different positions frame to frame which makes for a rather jumpy end result.
Any tips on how to remedy this, is it done when taking the shot, or in editing afterwards? The shots are taken on a small point and shoot digital camera, as the shots will be taken at various locations etc I wont be able to have a static setup with a tripod and mark on the floor to ensure the same position each time. The method I have tried it just holding the camera out in front of me at arms length and trying to get the same height each time.
Is there a way to easily and quickly edit shots in Paint.NET so that the eyes and nose are at the same position in each frame for a series of photos, I'm not too bothered about all the frames being the same size or the edges lining up etc.
View 6 Replies
View Related
Dec 29, 2012
How do I record a series of actions that I can then save it as a kind of script or macro that I can run then in another work session on an object? Is this possible?
View 2 Replies
View Related
Aug 7, 2013
I'm using the script export-selection.scm to create a series of PNG files from an existing image. It works fine but I find the fact that it saves the file to a name that it constructs (based on the .xcf file loaded, and whether it is saving a one layer or visible layers, etc) really slows me down, as I have to bounce between gimp and explorer to rename each output file after every save.
I looked at the source to see if I could tweak it so that the filename it created was unique, but I must have missed a crucial episode somewhere, because I couldn't get past first base.
Here's the candidate line from the script:
(outputName (string-append imageNameNoExt "-sel"))
..so you get a filename of MyGimpImageName-sel.png. What I want to do is create filenames called MyGimpImageName-sel-001.png, MyGimpImageName-sel-002.png etc.
An alternative would be to add an edit box to the dialog to allow you to specify the filename.
On a related subject, is it possible to set up a key binding to execute a script? If this could be done, I could roll a version of the script that skipped the dialog altogether and just used the last settings. In combination with the unique filename mod, this would speed up the job considerably.
View 7 Replies
View Related
Mar 17, 2011
I am looking for plugin that divide one photo or image in 10 rectangles
View 2 Replies
View Related
Sep 29, 2010
I'm brand spanking new to paint.net and I have a question. I have 2 photos that I want to place side-by-side, combined into one image. One will need to be resized to be the same size as the other so the edges will match up. I don't need to do anything else to them, just stick them together and print it as one image.
View 4 Replies
View Related
Oct 12, 2007
Is it possible to create an image that I can then use to overlay images on my website, to give them the apperance of being set to opacity 50%?
View 2 Replies
View Related
Apr 4, 2012
I have a PNG image with only one layer as a start point. It has a faded map on it.
I have a second PNG image with a hex grid on it. I do colour to Alpha to establish transparency on the hex grid for white filled hexes (others are not filled with white).
Now, I wish to overlay a portion of the first image with the faded map with the non-transparent part of the second image.
So I select by colour (for the hexes not filled with white) on the second image (the overlay) and I then paste to the first image (after creating a transparency layer and selecting it to receive the overlay).
I see the desired overlay section (minus any transparent stuff as expected), however it is centered over the map in the first image, not where I want it to be. It is a floating selection and must be anchored. So I select the anchor icon in the layer dialog and I think I anchor it into the transparency layer on the first image (that's what I'm trying to do anyway).
And then my problem:
I want to move the thing I just pasted in to the right place with respect to the underlying faded map. I attempt to use the move tool, but all I move is the background map (pretty much the opposite of what I want).
Nothing I do seems to let me reselect the pasted-in overlay so that I can move it.
Why I can't ever reposition the pasted in overlay? It should be in the transparency layer I created but even if I select all, I don't seem to be able to move anything other than the background image.
View 2 Replies
View Related
Mar 30, 2011
I'm searching for a plug in to create a dynamic .gif image where i can add diferent images in that switch after 0,4 seconds ore something..
View 1 Replies
View Related
Jan 31, 2011
I have two images in what I call the work tray at the top of Paint. How can I merge them? Or ad one to one of the layers of the other?
View 14 Replies
View Related
Mar 31, 2012
Is there any way to crop a video clip in an overlay track-not just change the size of the entire image keeping it intact.
View 6 Replies
View Related
Dec 3, 2007
i'm trying to do is too replace the American flag with the other flag. From the images below you can see that I wasn't really succesfull when I did it. It just isn't natural.
View 1 Replies
View Related
Nov 21, 2012
PSPro X. Any easiest way to compose an image comprised of 2 imported pictures.I want to have an image made up from 2 jpeg photos and have the two alongside each other, ie one of the bride on the left side and one of the groom taking up the other half of the finished image on the right side.
View 10 Replies
View Related
Nov 21, 2012
Is there an easy way to apply multiple effects on a set of images or individual images, similiar to something like a preset in LightRoom.
For example, if I run the following effects I have to apply it to each image one effect at a time and repeat for each image that I want the exact same effects applied but would prefer to do it all in one go
Blur/(GPU) Gaussian Blur
Noise/Reduce Noise
Photo/Sharpen+
I use these to clean up the moire from scans and reduce dust/dirt then apply a mild sharpen effect to bring back the now softenend image back up slightly. Being able to have presets would be a real bonus for quick clean ups, of digital camera images or camera phone images
I found it by spending a bit more time looking through the menus, under the Effect menu and the Advanced tab and creating a custom effects script ......
But now would like to see if I can have a list of presets instead of having to load them through the script engine one at a time, maybe an option under the 'Effects/Presets' menu option listing all the scripts that are currently saved.
View 7 Replies
View Related
Jan 1, 2012
I wasn't really sure how to put that into a title, but yeah. I'm sure it's pretty easy to figure out, but I just don't really feel like it.. I basically mean, how do you select a part of an image and move it onto another one without it being on top of the other image?
View 1 Replies
View Related
Sep 3, 2013
I'm an architect and would like to automate a process we do all the time: shadow studies.
Here's a typical scenario: we render a view of a building, same camera angle, just changing the time of day for each rendering. Then we take those renderings and overlay them in Photoshop setting each layer to "Multiply", add a Brightness/Contast or Levels adjustment layer, and save said image. We do this for three times a year (one equinox and each solstice), often a few views of the building for each.
So a typical shadow study might be 4-5 views, three times a years, so that's 12-15 composite images. This process gets repeated multiple times for each project as we change the design, so there is a lot of repetition.
I know how to create simple Actions. I know how to run a batch. What I don't know how to do and would like is a way to run a batch where I select some files and it creates the composite. The hurdle is making the Action and Batch be "generic" so that when I run the batch, I can select the images I want and the place to save it. That's the part I don't know how to do.
The Action I created is limited by (a) files open and (b) therefore only applicable to a certain number of open files (if I create the Action with 4 open files, it will only work on 4 files, not 3, not 5).
If required, I could probably script something. I know some programming/scripting, but have never done it for Photoshop.
View 3 Replies
View Related
Jan 17, 2013
I am trying to replace the head from one photo with the head from another. I was able to remove the background of the top head using the lasso, but when I create a layer and bring it to my background pic, there is a white area around it. I have tried Grim Color Reaper, but it is wiping out part of the pic I'm overlaying. I think this is due to the fact that the pic has some off-white and the background is now white and they are being read the same. I've also tried the Magic Wand, but seem to have the same issue.
View 1 Replies
View Related
Feb 14, 2011
how to take a photo or image, create multiple images to print and when cut out, will create a complete image when painted. Similar to how its done in photo shop only, I'd like to zoom in to areas, trace out the areas, then take those selected areas that I traced and move them to a different layer. Is this possible?
View 1 Replies
View Related
Feb 14, 2012
Spent all night working on a more complex "test" of V4 and it appears I ran into an overlay brick wall. My last component is a series of 6 social media-like icons and I only have two overlay tracks. It appears that I can select a group of images to drag to an overlay track but they are applied sequentially. I need them to persist to the end of the video.
Is there a way to layer static images? I see that with shapes and titles I can go hog wild in one overlay.
View 4 Replies
View Related
Dec 13, 2013
I've run in to a rather troubling issue where Illustrator seems to be exporting images with a very subtle white grid overlay. The raw images do not have this grid, neither do the images as viewed in Illustrator. The grid appears when exporting as .png and .jpg in a variety of resolutions.
View 2 Replies
View Related
