Photoshop :: Swapping Images? Overlay?
Dec 3, 2007i'm trying to do is too replace the American flag with the other flag. From the images below you can see that I wasn't really succesfull when I did it. It just isn't natural.
View 1 Replies
ADVERTISEMENT
Edge Animate CC :: Rollover And Click Event With Swapping Images?
Jun 24, 2013I want to have a mouseover and -out effect on my navigation bar and on the event click it should stay in the mouseover status. So far the mouseout and the click event affect each other on a wrong way. The example I attached here is done with plain rectangles, but later they will be images.
MyStatusQuo: [URL]
Photoshop :: Overlay Images
Oct 12, 2007Is it possible to create an image that I can then use to overlay images on my website, to give them the apperance of being set to opacity 50%?
View 2 Replies View RelatedPhotoshop :: Batch Overlay Multiple Images
Sep 3, 2013I'm an architect and would like to automate a process we do all the time: shadow studies.
Here's a typical scenario: we render a view of a building, same camera angle, just changing the time of day for each rendering. Then we take those renderings and overlay them in Photoshop setting each layer to "Multiply", add a Brightness/Contast or Levels adjustment layer, and save said image. We do this for three times a year (one equinox and each solstice), often a few views of the building for each.
So a typical shadow study might be 4-5 views, three times a years, so that's 12-15 composite images. This process gets repeated multiple times for each project as we change the design, so there is a lot of repetition.
I know how to create simple Actions. I know how to run a batch. What I don't know how to do and would like is a way to run a batch where I select some files and it creates the composite. The hurdle is making the Action and Batch be "generic" so that when I run the batch, I can select the images I want and the place to save it. That's the part I don't know how to do.
The Action I created is limited by (a) files open and (b) therefore only applicable to a certain number of open files (if I create the Action with 4 open files, it will only work on 4 files, not 3, not 5).
If required, I could probably script something. I know some programming/scripting, but have never done it for Photoshop.
Photoshop :: How To Overlay One Image Over Multiple Images From A Folder
Nov 11, 2013I need to overlay a transparent image of a tablet over about 50 images from a folder - is there any automated way to do this? I can use either Photoshop or Illustrator
View 2 Replies View RelatedVideoStudio :: Crop Overlay Images
Mar 31, 2012Is there any way to crop a video clip in an overlay track-not just change the size of the entire image keeping it intact.
View 6 Replies View RelatedVideoStudio :: Layer Static Images On Overlay Track?
Feb 14, 2012Spent all night working on a more complex "test" of V4 and it appears I ran into an overlay brick wall. My last component is a series of 6 social media-like icons and I only have two overlay tracks. It appears that I can select a group of images to drag to an overlay track but they are applied sequentially. I need them to persist to the end of the video.
Is there a way to layer static images? I see that with shapes and titles I can go hog wild in one overlay.
Paint.NET :: How To Overlay Series Of Images To Get One Combination Image
May 2, 2011So I was oot and aboot yesterday and I took a series of pictures of a drummer in action. It was a rapid series, like five pictures covering five seconds of him rocking out. I want to combine all those five pictures into one ... "master" picture. My idea for the "master" picture is one single picture, where you can see his arm and body movements (and the drum cymbals moving) from all the five pictures.
That's probably a terrible way of describing it, but that's what I want to do.... I tried layering the pictures together as overlays, but while that combined all the images together, the end result was too blurry to make anything out.
Illustrator :: CS4 Exporting Images With Subtle Grid Overlay?
Dec 13, 2013I've run in to a rather troubling issue where Illustrator seems to be exporting images with a very subtle white grid overlay. The raw images do not have this grid, neither do the images as viewed in Illustrator. The grid appears when exporting as .png and .jpg in a variety of resolutions.
View 2 Replies View RelatedVideoStudio :: Video Clips And Images Stuttering On Overlay Tracks?
May 24, 2011This is a new fault which has appeared with Corel Pro x3. When I play clips on the overlay tracks as a project they play faultlessly. When I play them as a clip on any overlay track, there is no sound and it stutters instead of one constant speed. I have installed the program twice now trying to fix this problem. I am editing in Standard Definition. What could be causing this problem? This occurs with all files on the overlay tracks played in clip mode.
My computer is a Pentium (R) D CPU 3.00GHz, 3.25GB of RAM, Windows XP Pro, Intel Motherboard, ATI Radeon HD 5450, 512MB DDR3, IDT Audio. Sony HVR-V1P Pan NVGS400
Lightroom :: How To Turn Off Photo Info / Overlay When Viewing Images In LR3
Oct 12, 2012Sometimes I take a screenshot from within L/R 3.6 and send it by email. Problem is the image name/date/size info. overlay spoils the image. I've looked all over L/R prefs etc but I can't see how to turn the info. off, assuming it's possible to do so?
I used to be able to import pics from my camera into a specific folder on my hard drive. That was until 2 weeks ago. Now my only choice is to import into the folders below. C. drive - where all my digi camera pics are - is no longer there. How do I get L/R import to recognize my hard drive again.
Photoshop :: Swapping Faces?
Jan 1, 2003I have two different pictures opened up on my Photoshop and would like to copy one face on the other pictures face...The pictures are slightly different in size.....and copy and paste do not work,
View 5 Replies View RelatedPhotoshop :: Swapping Colours?
Jun 27, 2007how do i give a command to photoshop to make everything that is black become grey like the one in the image?
how can i make the background transparent so this logo will look good on my flyers?
Photoshop :: Face Swapping
Jun 13, 2009how to do face swapping,i want to print instructions,so i can go step by step to change certain faces in my photo projects.
View 4 Replies View RelatedPhotoshop :: Swapping Shadow With Light
Aug 30, 2013Because of the lighting, the small craters in the wall are filled with shadow. I want to get rid of these shadows and highlight them instead (I want them to be brighter than the rest of the wall).
Every time I try to select the shadows and replace them with light the edges are to hard and the color difference is too big with the rest of the wall. Also I think my selections aren't precise enough.
Photoshop :: Swapping Colours In A Logo
Mar 30, 2004I have an logo that has a brown background and a white foreground. How do I swap around the colours so that the background becomes white and the foreground becomes brown? Also is it possible to replace one colour with another colour. I am currently using Photoshop 6.
View 1 Replies View RelatedPhotoshop :: Head Swapping Question
Sep 18, 2007Ok so I have a family photo. Able to now move the heads around by creating separate layers for each. Just trying to figure out to do with the "white" areas that are left behind due to the varying sizes of the heads. So when I switch the head I have all this extra white space left behind from the prior head. What tool is best to cover up the white area with say the background behind the head ? Clone stamp doesn't seem to work inside the white area.
View 2 Replies View RelatedPhotoshop :: Lasso Tool- For Head Swapping
Nov 21, 2007To take a persons face from one picture and overlay it on another persons head.
View 4 Replies View Related3ds Max :: Unwrap UVW Vertices Swapping?
Jan 9, 2012I have been having some issues within the unwrap editor and do not seem to find a similar question here. Basically we are creating models of tractors so the left and right sides of certain parts are just a mirror of each other. Regardless of which piece I'm applying the modifier on, when I save the UVW and apply it to the complementary/opposite piece on the other side the unwrap looks perfect, however the textures look stretched/warped. The only way to correct this is to reset the unwrap and re-flatten and redo the whole piece (unwrap) again. Basically not saving any time by "loading" the previous unwrap that I had just saved. Since the unwrap itself looks like the saved one BUT I was wondering if somehow the vertices are being swapped like X is now Y, Z is now X, etc. The viewports show the XYZ orientation still correct but the UNWRAP seems to be different.
View 5 Replies View RelatedGIMP :: Swapping One Color For Another
Jan 18, 2013I have an image, and there's a part of it that's red that I want to turn into a different shade of red (or a different color altogether)--but I want the rest of the image to remain unchanged.
How do I do that? (This is seriously the first time I've ever used a graphic art computer program of any sort, so I am a complete square-one newb.)
It seems like such an insanely simple thing to do, yet I've searched and searched the internet, and it seems like all the tutorials I've found don't work or leave out some sort of important step that I don't get, and I just can't get it right. The best I've done so far is to convert *most* of the red stuff to a different color, all except the outer edges, making it look pixelated and gross.
Lightroom :: Swapping Drives With Videos?
Jul 13, 2012I have a Macpro with 4 internal hard drives. I keep photos on one of the drives and videos on two of the other drives and swap out these drives with other drives that have videos on them. I also use external drives that have videos on them. I want to import videos from all of the different drives that I swap back and forth.
1. What will happen if I tag videos on the internal drives and then swap them out with other drives? Will it just show a broken link to the video until I put it back in?
AutoDesk Smoke :: Swapping Sources In History
Oct 24, 2011I am having problem with swapping Sources in History in the record timeline. In the History view I can double click on the processes in the tree, i.e. Action or refrain but if I double click the source to swap it out nothing happens. Nothing at all.
what could be causing this, really very annoying when I want to replace the current footage with a new render from 3d.
Revit :: Swapping Levels Of Building Floorplans
Sep 20, 2013I need to swap my level 1 and level 2 of my building's floorplans. What is the most efficient way to take the walls etc. from level two and place them on level 1, and take whats on level 1 and place them on level 2? I am swapping the floorplans.
View 2 Replies View RelatedPaint.NET :: Swapping Color Values In A Selection
Jun 17, 2011what the technique is called when you swap the values of two of the colors within a selection?
For example, let's say that we have a nice pinkish color for something... but you don't want pinkish. This would keep things looking relatively nice, simply by swapping all the red values with the blue values, giving you nice lavender-ish color instead. Or perhaps swapping blue with green values, giving you a more orange-y color.
Illustrator :: Swapping Out Colors In Gradient Mesh
Nov 15, 2010I have a gradient mesh and I used a single pantone color to shade it, ie. with different tints of the one colour.
I want to see what it looks like in a different pantone color and wondered if there was a way to swap out the original color for a new one and keep the different percentages at the same time.
3ds Max Modeling :: Flipped Faces Swapping Between Mirrored Instances
Sep 3, 2012I'm having a bit of a frustrating issue with flipped faces. Basically I have an object that i am trying to mirror over as an instance. Just like dozens of other object within the same scene, MAX decides to flip the faces on the mirrored object. Simple fix would be to highlight the affected object and flip the faces back. This only causes the "unique" object to flip backwards instead. So, because the objects are instanced, the objects are essentially "swapping" flipped face orientation between the two always leaving one of them with flipped faces. Iv'e tried adding a normal modifier to one, but still resulting in the same issue. I have also tried messing around with resetting x form.
View 4 Replies View RelatedAutoCAD Inventor :: Swapping Title Block And Format
May 2, 2012I have a completed drawing that needs to be with a different title block and maybe page size. Is there a way to swap this out without having to recreate the drawing on the desired format?
View 2 Replies View RelatedEdge Animate CC :: Image Swapping With Correct Dimensions?
Jun 13, 2013Hovering over a row of thumbnails, I swap the full size photo following this code :
var photo = new Image();
photo.src = 'images/'+fileName; // parameter of the function
console.log(fileName+' L= '+photo.width+' H= '+photo.height);
sym.$('toile').attr({
width: photo.width,
height: photo.height,
src: photo.src
});
The full size photo swaps, but retaining the dimensions of the first one (initially on the Edge stage).
Even more puzzling, as you can see in the following screen capture, sometimes I can get the correct photo.width and photo.height (even if it isn't correctly assigned to the 'toile' element), and sometimes those values are zero ! And I feel so lost that this seems random.
May be it has to do with loading delay, asking the width and height information before it is available ? Should I necessarily preload the images ?
CorelDRAW Graphics Suite X5 :: Memory Usage - Avoid Swapping
Feb 21, 2012we are using a Dell T5500, WIN7, 64bit with 24 GB main memory. Corel X5 seems to use only a small part of it, although we have large files and jobs (e.g. to export to Adobe Illustrator). This takes a long time (> 10 min), where sometimes Corel even writes nothing to the AI file.
CPU usage is medium, memory usually around 2GB, but not larger.
How can we bring Corel to use more memory to be faster and/or in order to avoid swapping else writing nothing into Adobe Illustrator?
AutoCAD Civil 3D :: Swapping Network Parts Will Not Work In 2012
Jun 1, 2012I'm trying to swap one type of inlet for another. I can swap the type-13 to a type-R but when I try to swap it for a double type-13 it reverts to the single type-13. This is happening with a 7' manhole as well. I can swap a 6' for a 4' or an 8' but it will not swap to a 7', it reverts to a 6'. Is there something in the catalog for this that preventing the swap?
View 5 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Menu Swapping - Migrating To CUIX From MNS
Jan 1, 2010I read Robert Bell's document “Migrating from MNU to the CUI” (Autodesk University 2007) with interest. I have been using 2005 up until now and I am finally forcing myself to get to grips with 2010.
I managed to get it to work after much trial and error through the CUI transfer interface.My customizing makes use of a lot of swapping pull-down menus, which swap in and out based on current later setting.A typical command would be:
(MENUCMD "P15=RCASPOPS.mfireeqp") where RCASPOPS is my swapping menu loaded at POP15.
Then I would use (MENUCMD "P15=*") to force the “mfireeqp” area of the pull-down menu to display.Trouble is, when I CUIload RCASPOPS, it does not seem to recognize the various areas of the menu.Here is a part of that subsection of RCASPOPS:
***MFIREEQP
[FireProtEquipLayers]
[--]
[0]0;
[defpoints]defpoints;
[X-Refs]x----ref;
[code]...
Typically the whole of RCASPOPS is loaded but when I try to force it to display, the whole of it pops on the screen (well, the top of the file does anyway) and not just the subsection I want.
Is this a syntax issue with the newer AutoCad?Also notice that I use the -> and <- for fly-out sections of the menu - is there a syntax issue with this? I notice that the future support of drop down swapping menus is not guaranteed. What is the alternative?