I have about 2500 screen shots in png-format. I need to convert them all into b/w-pictures. How could this be done easily? Furthermore (but I guess that will be the issue in another list), I will have to run all these screenshots through an OCR-program. So what would be the best output-format for these screen shots?
View 3 Replieshow you all post screen shots, I'm an aide for my graphic design teacher and he asked me to write a tut on a simple animation i made. Problem is, the people I'm writing it for have never used image ready, I know it would help them if I added in screen shots, so they could see exactly what I meant, is there some program for this or I am I just not getting it?
View 2 Replies View RelatedI see often in forums and tutorials where the authors have pasted PS screen shots of various boxes from the palletes. How does one do these print screen of portions of the whole screen?
View 3 Replies View RelatedI have just downloaded and installed Paint.NET today; is it possible to capture screen shots?
View 8 Replies View RelatedI used to use Paint shop pro, years ago and it had a nice little screen shot function. Does paint.net do this as well?
View 5 Replies View RelatedI want to use screenshots of websites in a web based portfolio. The images should be about 200px * 300px, or so. I'm having a hard time producing consistent results when cropping. I can do a screen shot of the entire screen for all of the sites and change the image size. The issue with this is that the shots are so small that the detail of screenshot is lost. This creates a very low quality image.
I tried to solve this by cropping the screen shot to a only feature a portion of it which would produce a more "artsy" looking image that would show the details more clearly. It was difficult to produce images that were sized consistently. There was no way to know what the exact size of the cropped image was.
Can I define a size for a mask and then apply it, or reverse it, to have a clearly defined size?
I have been trying all morning to get Photoshop CC to open some screenshots I took, something that I've normally had no problem with. Any way I try to open the files (dragging them to the icon in my dock to launch Photoshop, openening Photoshop first and then going to File -> Open and opening them) causes PS to crash. This happens with old screenshots and new screenshots.
I just got a new computer over the weekend and have gone from Snow Leopard to Mountain Lion. I'm not sure if the issue is with OS 10.8 or Photoshop CC 14.1.2?
I'm trying to create a street elevation using a series of screen shots taken from Google maps. Here an image of the type of thing I'm trying to achieve:
You'll noties that the image is flat.. Is this something I can achieve using the perspective tool? If so, do I change the perspective of all the individual images and then merge them? Or do I merge them, and then change the perspective in sections?
Got specs for converting a print ad to jpg for ATM: 800wx600h; 72dpi; 256 colors. As far as I know, the only way to get 256 colors is to convert to index. When I do, the halftones get slightly grainy.
Also, I can only save the file as .psd, not .jpg as required. How to convert my file to 72 dpi jpg with 256 colors.
I've created some graphic artwork in Photoshop RGB, and now its time to output these graphics to an Illustrator CMYK file.
I have a bunch of layers that I have created for lens flares / light effects and I created these via filling a layer black and then using the Lens Flare Filter and then converting the layer to a Screen layer blend.
I notice that when I convert to CMYK in photoshop I lose the effect of those screen layers, is there anyway I can get those layers to look the same in CMYK without having recreate them from scratch in the CMYK space?
In my illustrator file I have a gradient background and was hoping to bring in these transparent lens flare lighting effects to place over the top of the gradient. I was thinking I might be able to merge the layers in Photoshop but unfortunately I need those screen layers to remain transparent.
I also tried turning the layer to normal 100%, convert to CMYK, placing into my CMYK illustrator file and then changing the layer to screen mode there but its doesnt look the same, its turn transparent like I wanted but it looks like where there is transparency there is a 25% opacity white.
I'm receiving PDF files for screen printing. How do I convert to Corel Draw in order to print?
View 12 Replies View RelatedI made an animation, and let's say I got it to look good at 15 FPS. I go to save it as an animated GIF, and that's in MS. How do I get the right MS to get 15 frames per second? and what's the conversion amount for other FPS numbers?
View 3 Replies View RelatedI use Linux Ubunto and enjoy making small animations with GIMP. How I can add sound to gif files? I'm assuming I need to convert the gif to avi or similar. I've done a Google search but not come up with anything that works.
View 2 Replies View RelatedMy CreateSpace pdf in both the Proofer online and the hard copy I just received have great color variance from what I submitted in my pdf cover and interior files. The vibrancy's gone. The bright spring green is dull. The light bluegreens more like gray.
SO, next to learn: I need to know the easiest way to convert my RGB to CMYK files, so I can replace what I've got in my CreateSpace book project interior and exterior spots. I would like to do this in the pdf state, from RGB pdf to CMYK pdf. I am happy to do page by page. The 44-page book has text, plus color images (from original watercolor paintings), with some black ink drawings as well. I work on a MacBook 10.6.8. I assembled the pdfs (page by page as "images") in GIMP 2.8. The original text I formatted in iStudio, easily uploading into GIMP, as images, then working each image in layers. Unfortunately, I didn't realize that flattened images can't be unflattened, so if I need to go back to a pre-pdf pages ('images' in GIMP lingo), I'll have to do quite a bit of reconstructing. The last layered building steps are now bound within the flattened images in 44-page pdf. Fortunately, I can easily alter one page at a time within my full pdf. I want to find an RGB to CMYK conversion that I can do page by page, popping out and back into my full pdf.
Am making a brochure, use the pre-set A5 print size. All great, but when converting the XCF file to PDF the fonts are not represented correct and are drastically reduced in size.
I tried the flattening option, but that takes a lot of resolution/sharpness out of the file and makes it less fit for printing.
How to remove vertical lines appearing on a Word File with Gimp-cropped cartoons (saved as jpeg and attached to the Word file) when it is uploaded to Kindle?
The Word file is pristine with the Gimp images (saved as jpeg. Only the cartoon appears. When I upload it onto Kindle these vertical and sometimes horizontal black lines appear on the image's edge? What can be causing this and how do I remove them.
I'm converting all of my photographs into digital. I don't want to do them one at a time since my scanner takes so long to scan, so I'm scanning four or five at a time. I want to cut the resulting image into individual photographs. Is there an easy way to do that? Attached is an example of the bulk photo scan.
View 6 Replies View RelatedGIMP 2.6.11 WinXP
I've been opening my RAW images in Irfanview, converting them to .tif images, and then opening the .tif images in GIMP for processing, but I've been getting a pop-up window (see screenshot) that says:
"Calling error for procedure 'gimp-image-set-resolution': Image resolution is out of bounds, using the default resolution instead."
What does that message mean?
I have a series of images that I want to all look as if I'm viewing them through coloured glasses. I have a particular shade of green in mind.. so I have the colour hex code. How do I do it?
View 4 Replies View RelatedIt used to be that I could take any ,jpg file, then save it as a .png so that I would have a transparent background in order to render the pic. Now, for whatever reason, when converted the background remains white. What setting has changed that I can no longer get a transparent background after the .png conversion? Gimp V. 2.6.8.
View 5 Replies View RelatedI used this video tutorial to convert a video file to a animated .GIF. As you can see from the gif I made, when the picture resets it lags.
[URL] .....
How do I stop the reset lag?
I have a image in grayscale that is posterized into three colors. Now I want to convert this image into three colors black, yellow, and orange, In other words something like this:
How do I do this? I want to get an idea of how my picture will look on my pumpkin.
I think my gimp version is 2.6.8p2.
I tried to change my cursor by simply greyscaling it, then saving it as ico, then changing the file extension of that to .cur, but once I change it to .cur and apply it. The cursor is offset by 32 pixels down, not at the top left, but at the bottom left. The png was exactly 32x32 and the original cur file that was taken from the png file works perfectly, but the greyscale cur file cursor is offset. Why is that and how can I fix it?
View 3 Replies View RelatedI want to create a a texture for a 3D model of a human head - I don't have the original template but I do have these examples which I can use as a template. [URL]
I think for the moment I'll skip the mouth and ears and eyes aren't so hard to sort. What I can't find however, is any information on how I would go about making the face, hair and neck. What seems easiest for a cack-handed individual such as myself is to use a photo (flat-lit, straight-on, neutral expression, unobscured) of someone's face and then deform it and use some clone-like tools to fill in any gaps.
Obviously I'll need to match the coordinates of particular points on the face and keep large sections entirely unmodified. Then I'll need to do some sort of cloning or smudging to extrapolate bits of the head I don't have.
Well, is it even possible to work from a photo (or couple of photos).
Let's say you just have a simple black line in Gimp. You then use the color select tool to select it, and you plan on then converting that Selection into a single line Path.
From:
Into:
You select the line, but the Selection tool actually travels a loop around the line. So, when you turn that Selection into a Path, you do not have a single line, but you instead have a loop.
So my question is this: is there any mechanism for making your Selection in GIMP just a single line so that it can then be converted into a Path?
Originally, I was trying to achieve this in Inkscape (and started a thread about it in the Inkscape forum). However, it appears that, although other Vector Art programs can achieve this, Inkscape cannot. So I was thinking that I could instead use Paths in GIMP instead, but this is not possible because of the nature of Selections, as far as I can tell.
Here's an attempt to illustrate this request:
Is there a way to do batch process of converting .jpg or .tif images from RGB to CMYK?
View 2 Replies View RelatedI'm here with 2013 SP2 64 bit Build 200 and two screens. Left screen is graphics area, Browser is on the left of right screen. Graphics is ATI Fire Pro V7800 with driver 9.3.3.3000.
In video (zipped MP4) you see a cutout of both screens, think of screens changing at the left of the browser.
Now, in many cases, after doing an operation, the browser is jumping back to the middle of my graphics in the left screen.
I want to print 2-3 red stains on white t-shirt to look like I've been shot whit gun and one near neck to look like I've been cut-throated I've downloaded some bloody brushes but it isn't that simple...it doesn't look real enough....how can I accomplish this?
View 5 Replies View RelatedI am starting my Photography project for my Art A-Level and am in need of some assistance. The theme for the project is ''Light''. I need to find/take photos connected to proverbs or sayings, involving light (ie: ''There is light at the end of the tunnel" and "Every cloud has a silver lining").
The photgraph can also include a form of light, or an effect added in Photoshop
If anyone could post some ideas, whether they be connected to or involving light, or some effects that I could apply after the photo has been taken.
This is probably easy, but I'm a newbie to Photoshop. I was just on vacation, and took some pictures of some old castles. I couldn't frame the whole thing, so I thought I'd take several shots and see if I could merge them all together.
View 1 Replies View RelatedIs there a way to get 2 separate images on the same screen?
View 5 Replies View Related