AutoCad :: Creating Series Of Dynamic Blocks In Order To Create Tabletop Conveyors For Plat Layout
Jul 21, 2010
I am currently creating a series of dynamic blocks in order to create tabletop conveyors fro plat layout. I am using AutoCAD 2009 and am currently having issues making the turning sections. I know this is very simple using AutoCAD 2010 as there are geometric constrains available.
The curved sections must be able to have the inside thickness adaptable, the wall thickness must remain 1/2" thick, and the corner sections must have a 30, 45, 60 and 90 degree radii on them (although allowing any angle would be ideal). I was going to use visibility states to achieve the different angles as this seemed the easiest way to do this.
Attached is the basic 90 degree corner with an inside width of 4.5" with leaders labeling the areas that must be adaptive.
View 5 Replies
ADVERTISEMENT
Feb 23, 2012
I design conveyors, when im done I layout all the parts so i copy object and make a layer called parts. my question is can i layout a part without making a whole new part off the frame so there is not other items in the veiwports?
In the pic at the origin is my conveyor then i have all the parts duplicated a second time for layout in the veiwports.
View 1 Replies
View Related
Aug 22, 2013
We have a new title block which now contains various fields to automatically populate the drawing number, number of sheets, issue etc. The problem we have is when we go to zoom all or extents on a layout tab it moves the layout to the right each time. If we only have one layout or we use a plain title block i.e. with no fields, the zoom works fine (layout stays put in the center). This is also true if we directly insert a field onto the layout - again no problems.
The cause of the problem only happens when a block containing a field is inserted onto the paper space of a layout and,there are multiple layouts containing blocks with fields.
View 6 Replies
View Related
Jul 3, 2012
Using ACADLT 2008
Im looking for a way to automate my drafting tasks, and this time I want to automate the creation of structural steel grid quickly as possible.
I was thinking about creating a dynamic block with all my drawing needs, and then use an array action to multiply it as I go, but I cant use it since the cell size inside the block is static .
Another idea I had is to create a dynamic block with fixed number of cell and columns, I gave to the dividers a starch action with divided multiplier. its working but its not practical because wit this method I have to create another million of grids(I attach this block )
View 1 Replies
View Related
Oct 31, 2005
After spending a lot of time creating a particular dynamic block, I realized that the order of custom properties of this block as shown in the Properties Palette is not organized in an optimal order.
For example I have "Cabinet Width" at the top of the custom properties list, and "Cabinet Height" way down near the bottom. This is going to make my Cad operators hunt around too much for the property they need to adjust.
The apparent order is by creation - first created custom property is listed first, last created is shown last. I really don't want to remake this dynamic block just to get the properties in a logical order.
I was wondering if it is possible to reorder the custom properties as shown in the properties palette?
View 9 Replies
View Related
Feb 28, 2012
I need to create a dynamic block for a "Glass Panel" in a balustrade. I need to be able to insert it, in one corner and stretch it in another corner, to suit the staircase angle.
I've created the block, but it isn't working correctly. I've attached a drawing, with the left hand drawing a sketch of how it needs to be. The right hand drawing is my dynamic block attempt. As can be seen, when the block is stretched between the 2 points, it doesn't follow the angle of the staircase correctly (Very slight run off)
View 9 Replies
View Related
Mar 1, 2013
I would like to create a "wave" dynamic block, see below...
It is made from wipeout.
Is it chance to make a similar?
If I make a list for the length (from 125 to 350), after can I make a table /list /summary where these size are shown?
View 9 Replies
View Related
Jan 4, 2014
I have a drawing with dimensions. Now, I want create Dynamic Block Controlling Visibility with dimensions in drawing with name dimension.
LT-don-TD LT-Kdoc-TD LT-Kngang-TDLT-don-thay LT-Kdoc-thay LT-Kngang-thayLT-don-moi LT-Kdoc-moi LT-Kngang-moiH-don-TD H-Kdoc-TD H-Kngang-TDH-don-thay H-Kdoc-thay H-Kngang-thayH-don-moi H-Kdoc-moi H-Kngang-moi
Then, I use command DAL; I can select dimension want use.
View 8 Replies
View Related
Jul 27, 2011
I am looking to create a dynamic block that changes in scale, ex. If I have two (2) viewports in paper space, one 1/4"=1'-0" the other 1/8"=1'-0" I want my blocks to appear to be the same size in paper space.
Also, I would like my blocks to change attributes/features ex. If I have a "light switch block" I would like to have the option of switching the block from a 3-way switch, 4-way switch etc.
View 4 Replies
View Related
Mar 31, 2013
I have AutoCAD 2013 and usially use in my work dynamic blocks with wipeout, e.g. valves, pumps and others.
So, few days ago I found that I cannot export my drawing from layout to model space. Everything is exported except wipeouts.
Is it something about new Autodesk politics or what? AutoCAD 2010 still works fine with the same drawing.
Examle.dwg is attached.
View 1 Replies
View Related
Apr 17, 2013
Is it possible to have a dynamic block with text which, when inserted into a drawing, will show the text orientation matched to the layout? I have a non-dynamic block which is simply a donut and a piece of text. When I insert it into a drawing, the text orientation will change to suit the orientation of the layout. I created another block with the same entities but I also added a couple of lines extending out from the center of the donut. I added stretch and rotation actions in order to rotate and stretch the lines.
I also gave the block visibility states so that either one or two lines would appear (the block is a utility pole,by the way, with the lines representing guy wires). When I insert the dynamic block into a drawing, I cannot get the text to match the orientation of the viewport. I've tried changing different combinations of settings but the text won't appear horizontal.
The two blocks I mentioned above are inserted into one file with a number of other blocks. When I check the properties of the non-dynamic block, the "match orientation" is set to YES. I cannot, however, change the "match to orientation" setting to YES on the dynamic block. Is this simply because it is a dynamic block or am I missing something? I don't create a lot of dynamic blocks and therefore I am not a wizard at it so I am assuming I am doing something wrong.
View 6 Replies
View Related
Feb 7, 2011
My office is trying to create dynamic blocks with dynamic attributes. We have the dynamic blocks created. how to create the attributes
View 3 Replies
View Related
Feb 28, 2013
I would like to create an "Y" dynamic block, see bellow.
The hole length and the "cross" point will be variable, between the two sticks will be 90 deg, and it will be FIX.
I would like if I change the "variable 2" distance the two sticks follow the cross point, and the top of the sticks stay in the same level, but between the sticks the 90 deg stay!
View 9 Replies
View Related
Apr 5, 2011
I work in logistics, and we use a lot of heavy racking. The problem is, we could be using 50 different footprints for each facility. I am the only person in my group who has any legitimate autoCAD experience. I am trying to figure out a way to make a block that any user could bring into the drawing, and key in dimensions to make a 3D rack. Like... a dialogue box that says "What is the leg height?" "What is the length of the horizontal supports?" "What is the depth of the rack?"
View 2 Replies
View Related
Aug 2, 2012
I am using Autocad 2011 and created a dynamic block which turned out fine.
After making a copy of this dynamic block and doing some additions to this new block (added several flip parameters), I found that when I run my mouse over this new block it lags. I have attached the drawing which contains both the blocks. The one on top is the problematic block whereas the bottom one is the one I created first and made a copy of.
View 2 Replies
View Related
Oct 22, 2010
I am generating autocad drawings with from scratch. One of the items that needs to be created in the drawing is a dynamic block. There are two ways which come to my mind to accomplish this tast. Either create a block in the new drawing or import it from somewhere. But I do not have a clue as to how either of them can be done.Pointers to the relevant statements should be sufficient.
View 2 Replies
View Related
Apr 21, 2011
I have been creating dynamic blocks within a drawing by:
-creating wblock
-inserting wblock into drawing
-editing block to add dynamic properties
I have noticed that this is only keeping the dynamic properties for this one drawing! when i try inserting the block into a new drawing it's only a standard block.
How do i edit these so that they are insertable to any drawing?
View 9 Replies
View Related
Nov 24, 2012
How to make Doors and Windows with AutoCad? I know that we use the W (Write Block) command and the I (Insert) command, but I don't know how to use them. I believe that we have to be able to use the specifications that are giving to us and make the doors and windows.
View 4 Replies
View Related
Apr 4, 2013
I use the RIBBONS when using ACAD, when creating Dynamic Blocks with Visibility States I am able to add, rename etc the states, but when I need to tell ACAD what to hide and what to show in each state I cant seem to locate the button within the ribbons to do so.
I find myself having to switch back to CLASSIC view to use them and then back to RIBBON.
See the 2 images.
CLASSIC.JPG
CLASSIC VIEW
RIBBONS.jpg
RIBBON VIEW
View 9 Replies
View Related
Aug 15, 2012
I've been asked to create some plots of vector arrows showing the results from water current metres, ie each data point has a position (x and y only), direction and a velocity.
I have created a dynamic block to handle the vector data (a simple arrow with a stretch and rotate controls)
What I need now is to somehow read in the values for each block from an excel spreadsheet or txt file?
Windows 7 x64
32GB RAM
Xeon E5420 @2.50GHz
3DS MAX 2014
Civil 3D 2014
View 1 Replies
View Related
Dec 27, 2011
I am creating a dynamic block to do details for structural framing. Attached is an example that I am stuck on. the widget plan and end plan went pretty good. But when I got to creating a cope on the ends I got stuck. I am attempting to stretch the required cope as you can see in my attached drawing. For some reason I can not get the end line to move with the horizontal cope line.
View 4 Replies
View Related
May 2, 2013
I'm working in AutoCAD 2010 and I would like to make the process of creating 2D documentation easier and faster for myself and my collegues, but during the process I've hit a dead end.
I would like to use fiedds (or something simillar) to partly automate the creation of 2D documentation. We have sheets organized in a specific way and I would like to create a custom field for each of the categories (eg. drawing number, number of parts, designer...) that could be edited easily like the parameters or object properties can. Basically what I would like to do is create custom fields or some other object that can be edited from a list in AutoCAD and then automatically refreshed in text boxes. Is there a possibility to do something like that using fields or perhaps a different solution?
View 5 Replies
View Related
Sep 2, 2011
I just only started trying to create Dynamic Blocks.
Here's what I have trouble with, I want to make the 2 "rectangles" in the fridge drawing stretch accordingly when I move the arrows for the compressor (the X).
But I want them to scale together and move so that they are still within the fridge part.
I tried a lot of Scales and Moves but I keep getting weird results.
I have the Dynamic Block here along with 3 examples of the fridges, what I'm trying to do.
-Attachment removed-
View 4 Replies
View Related
Feb 6, 2013
I'm trying to create a window block with a grille. I've created the block and the horizontal grilles. What I'm having a hard time with is creating the vertical grilles. I would like to set up an array that would take the glass width, divide by 12, round up the value to get the number of vertical sections. Here's the code that I've figured out:
(W/(ceil(GW/12)))
W=Width
GW=Glass width
How do I set up an array with this formula?
View 2 Replies
View Related
Jan 9, 2013
Just exactly what does "Angle" represent when placing a "Rotation Parameter" in a DBlock?
I've tried a bunch of diff angles and haven't noticed a difference. I'm trying to figure out just what effect diff values would have. I thought that maybe when rotating the block instance, I'd only be able rotate it "so far" (270 degrees in the example I've shown). But it still went well beyond that.
View 2 Replies
View Related
Feb 21, 2013
I am creating an upper cabinet which has a fixed height but you can select different widths. What our firm does is also list the size of the cabinet. What I would like to do is make this font some sort of preset attribute and control it with the visibility states. I also want to control the font height by the scale of the drawing. my question is I if its possible and how? I've attached what I have thus far. The attribute is in teh top right corner and is justified as top right. The only way I can get this to work is if I manually adjust the font after its inserted into the drawing.
View 5 Replies
View Related
May 31, 2011
Is there a way to create a library of walls using dynamic blocks (similar to the walls in the full version of autocadd)? I've payed around a bit trying to create a dynamic block and I'm not having much luck.
View 9 Replies
View Related
Jan 21, 2012
I would like to create a label that can be copied on a construction drawing that will label various materials. The last time I did this I drew a circle, put text inside, and attached a leader. Every time I wanted to label another instance of a material I had to copy all three things which was too repetitive. I think there is a way to create a dynamic block where all of these things are one block that can be selected and moved with one click but the leader is still adjustable.
View 1 Replies
View Related
Nov 21, 2013
I am labeling my pipe network structures and I was trying to create a label with a dynamic block. I want to have an octagon with text that I can change. So when I label INLET 1 I will have the information I need plus a symbol that corresponds to it.
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)
View 3 Replies
View Related
Jan 4, 2014
I created Dynamic Block visible with blocks. But I don't know how dimension with Dynamic Block first rowahead (Dimension style). I very try but don't success. create dimension with Dynamic block visible. Purpose, I drawing as I sent to you. I can select from list Dynamic block visible instead go to change dimension style on the Styles bar (Dim style control).
View 9 Replies
View Related
May 5, 2010
I've made annotative blocks and I've made dynamic blocks... My intent is to integrate both but I can't find a way to move dynamic block parameters separately at different annotative scales.
In other words, if I insert an annotative dimension and add multiple scales I can move the dimension grips independently at each scale. If I insert a dynamic block I want to be able to use the dynamic block's action "grips" to do the same. However, with a dynamic block, if I move a stretch action at one annotation scale it moves the action at all annotation scales.
The attached file shows a simple example.
View 2 Replies
View Related
