AutoCad 3D :: Creating Dynamic 3D Blocks
Apr 5, 2011
I work in logistics, and we use a lot of heavy racking. The problem is, we could be using 50 different footprints for each facility. I am the only person in my group who has any legitimate autoCAD experience. I am trying to figure out a way to make a block that any user could bring into the drawing, and key in dimensions to make a 3D rack. Like... a dialogue box that says "What is the leg height?" "What is the length of the horizontal supports?" "What is the depth of the rack?"
View 2 Replies
ADVERTISEMENT
Jul 3, 2012
Using ACADLT 2008
Im looking for a way to automate my drafting tasks, and this time I want to automate the creation of structural steel grid quickly as possible.
I was thinking about creating a dynamic block with all my drawing needs, and then use an array action to multiply it as I go, but I cant use it since the cell size inside the block is static .
Another idea I had is to create a dynamic block with fixed number of cell and columns, I gave to the dividers a starch action with divided multiplier. its working but its not practical because wit this method I have to create another million of grids(I attach this block )
View 1 Replies
View Related
Aug 2, 2012
I am using Autocad 2011 and created a dynamic block which turned out fine.
After making a copy of this dynamic block and doing some additions to this new block (added several flip parameters), I found that when I run my mouse over this new block it lags. I have attached the drawing which contains both the blocks. The one on top is the problematic block whereas the bottom one is the one I created first and made a copy of.
View 2 Replies
View Related
Oct 22, 2010
I am generating autocad drawings with from scratch. One of the items that needs to be created in the drawing is a dynamic block. There are two ways which come to my mind to accomplish this tast. Either create a block in the new drawing or import it from somewhere. But I do not have a clue as to how either of them can be done.Pointers to the relevant statements should be sufficient.
View 2 Replies
View Related
Apr 21, 2011
I have been creating dynamic blocks within a drawing by:
-creating wblock
-inserting wblock into drawing
-editing block to add dynamic properties
I have noticed that this is only keeping the dynamic properties for this one drawing! when i try inserting the block into a new drawing it's only a standard block.
How do i edit these so that they are insertable to any drawing?
View 9 Replies
View Related
Nov 24, 2012
How to make Doors and Windows with AutoCad? I know that we use the W (Write Block) command and the I (Insert) command, but I don't know how to use them. I believe that we have to be able to use the specifications that are giving to us and make the doors and windows.
View 4 Replies
View Related
Apr 4, 2013
I use the RIBBONS when using ACAD, when creating Dynamic Blocks with Visibility States I am able to add, rename etc the states, but when I need to tell ACAD what to hide and what to show in each state I cant seem to locate the button within the ribbons to do so.
I find myself having to switch back to CLASSIC view to use them and then back to RIBBON.
See the 2 images.
CLASSIC.JPG
CLASSIC VIEW
RIBBONS.jpg
RIBBON VIEW
View 9 Replies
View Related
Aug 15, 2012
I've been asked to create some plots of vector arrows showing the results from water current metres, ie each data point has a position (x and y only), direction and a velocity.
I have created a dynamic block to handle the vector data (a simple arrow with a stretch and rotate controls)
What I need now is to somehow read in the values for each block from an excel spreadsheet or txt file?
Windows 7 x64
32GB RAM
Xeon E5420 @2.50GHz
3DS MAX 2014
Civil 3D 2014
View 1 Replies
View Related
Dec 27, 2011
I am creating a dynamic block to do details for structural framing. Attached is an example that I am stuck on. the widget plan and end plan went pretty good. But when I got to creating a cope on the ends I got stuck. I am attempting to stretch the required cope as you can see in my attached drawing. For some reason I can not get the end line to move with the horizontal cope line.
View 4 Replies
View Related
May 2, 2013
I'm working in AutoCAD 2010 and I would like to make the process of creating 2D documentation easier and faster for myself and my collegues, but during the process I've hit a dead end.
I would like to use fiedds (or something simillar) to partly automate the creation of 2D documentation. We have sheets organized in a specific way and I would like to create a custom field for each of the categories (eg. drawing number, number of parts, designer...) that could be edited easily like the parameters or object properties can. Basically what I would like to do is create custom fields or some other object that can be edited from a list in AutoCAD and then automatically refreshed in text boxes. Is there a possibility to do something like that using fields or perhaps a different solution?
View 5 Replies
View Related
Feb 6, 2013
I'm trying to create a window block with a grille. I've created the block and the horizontal grilles. What I'm having a hard time with is creating the vertical grilles. I would like to set up an array that would take the glass width, divide by 12, round up the value to get the number of vertical sections. Here's the code that I've figured out:
(W/(ceil(GW/12)))
W=Width
GW=Glass width
How do I set up an array with this formula?
View 2 Replies
View Related
Jan 9, 2013
Just exactly what does "Angle" represent when placing a "Rotation Parameter" in a DBlock?
I've tried a bunch of diff angles and haven't noticed a difference. I'm trying to figure out just what effect diff values would have. I thought that maybe when rotating the block instance, I'd only be able rotate it "so far" (270 degrees in the example I've shown). But it still went well beyond that.
View 2 Replies
View Related
Feb 21, 2013
I am creating an upper cabinet which has a fixed height but you can select different widths. What our firm does is also list the size of the cabinet. What I would like to do is make this font some sort of preset attribute and control it with the visibility states. I also want to control the font height by the scale of the drawing. my question is I if its possible and how? I've attached what I have thus far. The attribute is in teh top right corner and is justified as top right. The only way I can get this to work is if I manually adjust the font after its inserted into the drawing.
View 5 Replies
View Related
Jul 21, 2010
I am currently creating a series of dynamic blocks in order to create tabletop conveyors fro plat layout. I am using AutoCAD 2009 and am currently having issues making the turning sections. I know this is very simple using AutoCAD 2010 as there are geometric constrains available.
The curved sections must be able to have the inside thickness adaptable, the wall thickness must remain 1/2" thick, and the corner sections must have a 30, 45, 60 and 90 degree radii on them (although allowing any angle would be ideal). I was going to use visibility states to achieve the different angles as this seemed the easiest way to do this.
Attached is the basic 90 degree corner with an inside width of 4.5" with leaders labeling the areas that must be adaptive.
View 5 Replies
View Related
May 5, 2010
I've made annotative blocks and I've made dynamic blocks... My intent is to integrate both but I can't find a way to move dynamic block parameters separately at different annotative scales.
In other words, if I insert an annotative dimension and add multiple scales I can move the dimension grips independently at each scale. If I insert a dynamic block I want to be able to use the dynamic block's action "grips" to do the same. However, with a dynamic block, if I move a stretch action at one annotation scale it moves the action at all annotation scales.
The attached file shows a simple example.
View 2 Replies
View Related
Mar 15, 2012
I have created a dynamic block with several visiblility states. The block works great for what I need it for. however, I am trying to add one more action to the block but am having issues.
This block is essentially a 24" retail cabinet with the visibility states showing the different drawer and shelf configurations. I want to be able to lengthen the cabinet in 24" increments and have the visibility show for each 24" section.....e.g. I want a 10' cabinet so I bring in the 24" starter block. Then stretch the cabinet to the 10' mark, then I can chose any drawer/shelve config for each 24" section (they are all different).
I can get the block to stretch in 24" sections....no problem.....i just want the visibility state to be duplicated as well for each section. Now as it stretches, there is only one Vis state and it only populates the first cabinet.
I could do this by copying the block over and over 5 times.....but I am hoping there is a way to make this dynamic.
View 7 Replies
View Related
Apr 23, 2013
I have a block I am making into a Dynamic Block. I will be adding in different visibility states. Depending on the visibility state the block would need to be inserted from a different point.
My question is, is it possible to add multiple insertion points to a dynamic block so depending on the visibility state it defaults to the correct insertion point?
View 2 Replies
View Related
Sep 7, 2012
is there a way to make dynamic blocks stretchable similar to a mleader,
the blocks i create are only stretchable by grips, and not by crossing
(i am using linear or point parameter stretches)
View 2 Replies
View Related
Jun 1, 2006
Is there anyway to link standard AutoCAD Grips and there commands to Dynamic Block Actions? I want to stretch an arc by its midpoint grip. This accomplishes something that no other commands do.
View 4 Replies
View Related
Mar 22, 2013
So I've done a reasonable amount of work with dynamic blocks. I have a block with a rotation action and grip to arbitrarily align it. However I realized when trying to combine it with an alignment grip (which actions on the basic or fundamental block rotation angle) that there didn't seem to be a way to some how link a dynamic block rotation action or one of the custom angle properties to a the fundamental block rotation angle. Thus there are two additive rotations at work; the dynamic block one with its grip and the fundamental rotation property.
This can cause some confusion when one person aligns with the grip and another via rotating the block's fundamental property and would also be problematic in the generalized sense if one was trying to select or programmatically read back the net angle alignment.
View 2 Replies
View Related
Jun 13, 2013
I have a dynamic block, that represents a stirrup.
I inserted in the block a Block Propreties Table, that have some preset dimensions for the stirrups. The grip of this table I decided to put in the top right corner.
The problem is that I can't make this grip moveable )
See the attachement with the block
View 1 Replies
View Related
Jul 25, 2012
new to dynamic blocks but looking to streamline my wiring diagrams here and have created a block that shows the typical wire styles we use in a simple easy way. I now want to add an overall flip to the entire block and have not been able to find set this. I would prefer to use the same label and go from there. I have included the block to show what I mean. It is only working on the single visible item at the one time. I know this has to be possible just let me know what I am doing wrong. I am running AutoCad LT 2013
View 3 Replies
View Related
Feb 28, 2012
I need to create a dynamic block for a "Glass Panel" in a balustrade. I need to be able to insert it, in one corner and stretch it in another corner, to suit the staircase angle.
I've created the block, but it isn't working correctly. I've attached a drawing, with the left hand drawing a sketch of how it needs to be. The right hand drawing is my dynamic block attempt. As can be seen, when the block is stretched between the 2 points, it doesn't follow the angle of the staircase correctly (Very slight run off)
View 9 Replies
View Related
Nov 21, 2011
I wish to create a dynamic block containing some attributes. These attributes are inside rectangles that can't be modified in length using linear parameters ; but the attribute has to be always in the middle of the rectangle. So, I draw a line inside the rectangle (in a hidden layer) and insert the attribute with center justification (not sure for the translation) that I place in the middle of this line ; then I put a coincidence constraint (not sure for the translation, but it's the first one) linking the middle of the line with the middle of the attribute.
But here's the problem : when stretching my rectangle, the insertion point of the attribute suddenly changes from "center" to "bottom left".
View 2 Replies
View Related
Dec 4, 2013
I am looking for a way to use the ATTIN/ATTOUT workflow to bring in data from an excel spreadsheet to drive the size of each of my block's instances. The block will be simple, a rectangle, with width and length parameters. For each entity in my excel/csv file these parameter values are spelled out. I know how to display these parameters in my attributes, but I don't know how, if I were to feed in these values, to drive the geometry. If there's a better way to take a list of width and length values to generate a series of blocks each with a rectangle containing its respective size.
View 1 Replies
View Related
Nov 7, 2011
I need to do some repetitive task on a lot of dynamic blocks, unfortunately, when I open each file, AutoCAD keeps asking if I want to open it with the block editor.
Is there a way to disable that dialog and open the files as normal dwgs?
A hint: BLOCKEDITLOCK doesn't make it, it shows another dialog...
View 4 Replies
View Related
Feb 15, 2012
usage of dynamic title blocks with visiblity states and defining page setup override templates which use same for quick plotting using sheet sets.
I have attached a simple dynamic block that I built which is the outter frame of our company title block, it is designed to allow users to quickly switch between Landscape and Portrait orientations.
The problem I am having is when I go to define page setups for my Sheet Set Page Setup Override Template I am unable to use the "Extents" option with auto-center because the "Extents", as defined by the page setup, includes ALL objects in the paper space regardless of visibility, so my title block ends up being centered in a stupid way if that printing configuration is used.
The only solution I have found is to use the "Layout" option when defining page setups, but this option produces other issues in other ways when printing. I don't want to use the "Window" option either for the potential for users to be using the page setup overrides to print drawings using different paper sizes or drawings that were not originally created using the current template the override is designed to accomodate.
Is there perhaps a system variable that defines whether invisible objects are included in the "Extents" setting in the page setup? I'm sure you'll all agree that Extents is the way to go in this situation, but it is not performing exactly as required.
View 5 Replies
View Related
Mar 26, 2012
I'm trying to make a dynamic block of a column radiator.
It should be very simple. It's a 46mm wide module that comes in a range of heights (300, 500, 600, & 750mm) and a range of assembly widths (9, 13, 18, 22 & 27 modules wide - more commonly given as mm widths of 414, 598, 828, 1012 & 1242 respectively).
My attempt at constructing it has gone quite well, but when 'stretching' the block a ghost of the core 414 (w) x 300 (h) unit remains. I attach the block to give you a better idea of what I mean.
View 4 Replies
View Related
Jul 16, 2010
I have a drawing ("SURUBURI.dwg") with several dynamic blocks ("M12", "M16", "M18" ... an so on...). I want to insert in my current drawing, one of the blocks from SURUBURI.dwg, for instance the block named "M12".
For that i tried creating a new command "INSERT_M12" that has the following script :
^C^C-INSERT; "I:/Ionut Mihaila/Goodies/SURUBURI.dwg/M12"
Now obvious that doesn't work, but i think it shows clearly what i want to accomplish. So is there an other way to do this?
View 9 Replies
View Related
Sep 18, 2013
I'm working on a drawing and I want an action to work on two diffrent dynamic blocks.
In my case, I wish to have two blocks that I can rotate by one rotation grip.
How do I manage to work this out?
View 1 Replies
View Related
Feb 4, 2011
I have successfully created a dynamic block. I can insert it into AutoCAD, and it behaves like I want, except for one thing.
I can select the block and change it by taking a grippoint and place it at another position. So my block is e.q. stretched, just like I wanted.
But then. When I want to use the ordinary STRETCH command of AutoCAD, I can only stretch the insertion point of the block, but not the grippoints. Is there a way to set a grippoint to be select edable by commands like STRETCH.
View 9 Replies
View Related
