AutoCAD Dynamic Blocks :: Creating Upper Cabinet With Fixed Height But Select Different Width?
Feb 21, 2013
I am creating an upper cabinet which has a fixed height but you can select different widths. What our firm does is also list the size of the cabinet. What I would like to do is make this font some sort of preset attribute and control it with the visibility states. I also want to control the font height by the scale of the drawing. my question is I if its possible and how? I've attached what I have thus far. The attribute is in teh top right corner and is justified as top right. The only way I can get this to work is if I manually adjust the font after its inserted into the drawing.
View 5 Replies
ADVERTISEMENT
Jun 22, 2012
I have made a dynamic block, but I do not find a way to get a counter in my bloc.
see the example , it must go from 01 -> 15 if the chose was 15HE,
View 3 Replies
View Related
Apr 17, 2013
Can Lightroom constrain images to a fixed pixel width regardless of height and orientation?
None of the options in the image sizing dialog seem to be suitable; for instance constraining the "long edge" would work for horizontal images but not for vertical ones.
View 4 Replies
View Related
Nov 2, 2012
The fixed width function did not work when I wanted to draw a fixed width rectangle. Is there a new way to do this in CS6?
View 4 Replies
View Related
Feb 16, 2003
I want to write the words HAPPY and BIRTHDAY underneath each other so that the word HAPPY takes up the the same width as the word BIRTHDAY. I also want to make the HAPPY twice as tall as the word BIRTHDAY.
Do I need to adjust the spacing and/or width for each individual letter? I'm guessing I can make the HAPPY taller by some kind of stretching tool?
View 1 Replies
View Related
Jun 18, 2012
Is it possible to stretch block depending of the insertion point so that the bottom part is always on the same high.
See attached image.
View 8 Replies
View Related
Apr 19, 2013
I'm trying to create a dynamic block that stretches between a minimum and maximum height. The block I'm trying to create is an "Acrow Prop" which has a height that ranges between 1050-1830mm. Is there any way to set a function that will stop stretching out side of these figures?
View 1 Replies
View Related
Jul 3, 2012
Using ACADLT 2008
Im looking for a way to automate my drafting tasks, and this time I want to automate the creation of structural steel grid quickly as possible.
I was thinking about creating a dynamic block with all my drawing needs, and then use an array action to multiply it as I go, but I cant use it since the cell size inside the block is static .
Another idea I had is to create a dynamic block with fixed number of cell and columns, I gave to the dividers a starch action with divided multiplier. its working but its not practical because wit this method I have to create another million of grids(I attach this block )
View 1 Replies
View Related
Jan 11, 2013
I'm trying to create a dynamic block for a slotted hole, where I can specify and vary the width and length independatly.
To add complications, I also want the centrelines to stretch accordingly.
I've made some progress, it's 75% there, however certain combinations seem to 'break' the block.
ACad, MEP, 3DS Max
Windows 7x64
X5482 @3.2Ghz 8Gb Ram
Quadro FX1700
View 6 Replies
View Related
Apr 5, 2011
I work in logistics, and we use a lot of heavy racking. The problem is, we could be using 50 different footprints for each facility. I am the only person in my group who has any legitimate autoCAD experience. I am trying to figure out a way to make a block that any user could bring into the drawing, and key in dimensions to make a 3D rack. Like... a dialogue box that says "What is the leg height?" "What is the length of the horizontal supports?" "What is the depth of the rack?"
View 2 Replies
View Related
Nov 13, 2012
At my last job, the CAD manager there had certain blocks which, upon insertion, automatically selected the rotate command. i.e., as soon as you click to place the block, it was free rotating.
I've search for the answer, but everything just tells me how to put the rotate command inside the dynamic block, but I don't know how to make it "auto-jump" to that immediately upon insertion.
View 2 Replies
View Related
Aug 2, 2012
I am using Autocad 2011 and created a dynamic block which turned out fine.
After making a copy of this dynamic block and doing some additions to this new block (added several flip parameters), I found that when I run my mouse over this new block it lags. I have attached the drawing which contains both the blocks. The one on top is the problematic block whereas the bottom one is the one I created first and made a copy of.
View 2 Replies
View Related
Oct 22, 2010
I am generating autocad drawings with from scratch. One of the items that needs to be created in the drawing is a dynamic block. There are two ways which come to my mind to accomplish this tast. Either create a block in the new drawing or import it from somewhere. But I do not have a clue as to how either of them can be done.Pointers to the relevant statements should be sufficient.
View 2 Replies
View Related
Apr 21, 2011
I have been creating dynamic blocks within a drawing by:
-creating wblock
-inserting wblock into drawing
-editing block to add dynamic properties
I have noticed that this is only keeping the dynamic properties for this one drawing! when i try inserting the block into a new drawing it's only a standard block.
How do i edit these so that they are insertable to any drawing?
View 9 Replies
View Related
Nov 24, 2012
How to make Doors and Windows with AutoCad? I know that we use the W (Write Block) command and the I (Insert) command, but I don't know how to use them. I believe that we have to be able to use the specifications that are giving to us and make the doors and windows.
View 4 Replies
View Related
Apr 4, 2013
I use the RIBBONS when using ACAD, when creating Dynamic Blocks with Visibility States I am able to add, rename etc the states, but when I need to tell ACAD what to hide and what to show in each state I cant seem to locate the button within the ribbons to do so.
I find myself having to switch back to CLASSIC view to use them and then back to RIBBON.
See the 2 images.
CLASSIC.JPG
CLASSIC VIEW
RIBBONS.jpg
RIBBON VIEW
View 9 Replies
View Related
Sep 26, 2013
we have moved from AutoCAD MEP 2012 to AutoCAD 2014 recently using Dynamic blocks with multiple visibility states.
in 2012 we could select a dynamic block with a specific visibility state and select similar, it would only select the visibility state that was previously selected.
in 2014 that is no longer an option WTH?
i have tried a couple of system variables to no avail (pickadd, selectionmode)2014
selectionmode is not a valid SV in 2012
View 9 Replies
View Related
Aug 15, 2012
I've been asked to create some plots of vector arrows showing the results from water current metres, ie each data point has a position (x and y only), direction and a velocity.
I have created a dynamic block to handle the vector data (a simple arrow with a stretch and rotate controls)
What I need now is to somehow read in the values for each block from an excel spreadsheet or txt file?
Windows 7 x64
32GB RAM
Xeon E5420 @2.50GHz
3DS MAX 2014
Civil 3D 2014
View 1 Replies
View Related
Dec 27, 2011
I am creating a dynamic block to do details for structural framing. Attached is an example that I am stuck on. the widget plan and end plan went pretty good. But when I got to creating a cope on the ends I got stuck. I am attempting to stretch the required cope as you can see in my attached drawing. For some reason I can not get the end line to move with the horizontal cope line.
View 4 Replies
View Related
May 2, 2013
I'm working in AutoCAD 2010 and I would like to make the process of creating 2D documentation easier and faster for myself and my collegues, but during the process I've hit a dead end.
I would like to use fiedds (or something simillar) to partly automate the creation of 2D documentation. We have sheets organized in a specific way and I would like to create a custom field for each of the categories (eg. drawing number, number of parts, designer...) that could be edited easily like the parameters or object properties can. Basically what I would like to do is create custom fields or some other object that can be edited from a list in AutoCAD and then automatically refreshed in text boxes. Is there a possibility to do something like that using fields or perhaps a different solution?
View 5 Replies
View Related
Sep 11, 2012
I've been sent a series of CAD drawings in which the author has used global width to define the appearance of features. I need to import this into our GIS, which for reasons too complex to bother with won't import any attributes such as width. I don't want to lose the information recorded so was wondering if it's possible to create a closed polygon to represent the shape of the line. I guess something might be possible using buffering, but I can't figure out how to use the existing line width.
View 9 Replies
View Related
Feb 6, 2013
I'm trying to create a window block with a grille. I've created the block and the horizontal grilles. What I'm having a hard time with is creating the vertical grilles. I would like to set up an array that would take the glass width, divide by 12, round up the value to get the number of vertical sections. Here's the code that I've figured out:
(W/(ceil(GW/12)))
W=Width
GW=Glass width
How do I set up an array with this formula?
View 2 Replies
View Related
Jan 9, 2013
Just exactly what does "Angle" represent when placing a "Rotation Parameter" in a DBlock?
I've tried a bunch of diff angles and haven't noticed a difference. I'm trying to figure out just what effect diff values would have. I thought that maybe when rotating the block instance, I'd only be able rotate it "so far" (270 degrees in the example I've shown). But it still went well beyond that.
View 2 Replies
View Related
Jul 21, 2010
I am currently creating a series of dynamic blocks in order to create tabletop conveyors fro plat layout. I am using AutoCAD 2009 and am currently having issues making the turning sections. I know this is very simple using AutoCAD 2010 as there are geometric constrains available.
The curved sections must be able to have the inside thickness adaptable, the wall thickness must remain 1/2" thick, and the corner sections must have a 30, 45, 60 and 90 degree radii on them (although allowing any angle would be ideal). I was going to use visibility states to achieve the different angles as this seemed the easiest way to do this.
Attached is the basic 90 degree corner with an inside width of 4.5" with leaders labeling the areas that must be adaptive.
View 5 Replies
View Related
May 5, 2010
I've made annotative blocks and I've made dynamic blocks... My intent is to integrate both but I can't find a way to move dynamic block parameters separately at different annotative scales.
In other words, if I insert an annotative dimension and add multiple scales I can move the dimension grips independently at each scale. If I insert a dynamic block I want to be able to use the dynamic block's action "grips" to do the same. However, with a dynamic block, if I move a stretch action at one annotation scale it moves the action at all annotation scales.
The attached file shows a simple example.
View 2 Replies
View Related
Oct 12, 2013
whats the difference between creating a width using layers and using polyline width?
View 2 Replies
View Related
Mar 15, 2012
I have created a dynamic block with several visiblility states. The block works great for what I need it for. however, I am trying to add one more action to the block but am having issues.
This block is essentially a 24" retail cabinet with the visibility states showing the different drawer and shelf configurations. I want to be able to lengthen the cabinet in 24" increments and have the visibility show for each 24" section.....e.g. I want a 10' cabinet so I bring in the 24" starter block. Then stretch the cabinet to the 10' mark, then I can chose any drawer/shelve config for each 24" section (they are all different).
I can get the block to stretch in 24" sections....no problem.....i just want the visibility state to be duplicated as well for each section. Now as it stretches, there is only one Vis state and it only populates the first cabinet.
I could do this by copying the block over and over 5 times.....but I am hoping there is a way to make this dynamic.
View 7 Replies
View Related
Apr 23, 2013
I have a block I am making into a Dynamic Block. I will be adding in different visibility states. Depending on the visibility state the block would need to be inserted from a different point.
My question is, is it possible to add multiple insertion points to a dynamic block so depending on the visibility state it defaults to the correct insertion point?
View 2 Replies
View Related
Jan 27, 2013
Suppose I have a rectangle 10 x 8 and then I join the middle points of the widths with a line ... so I will end up with 2 boxes of 5 x 8. Now what I need to do is to stretch the side by 2 units to become 12 by 8 but I want the middle line to move automatically during the stretching process so I end up with two boxes of 6 x 8.
View 9 Replies
View Related
Apr 21, 2008
i have started creating layouts in photoshop cs3 and i was wondering if there is an easy way to save my layouts as fluid width, as opppsed to fixed, so they resize according to the browser window. is css the only way to go?
View 4 Replies
View Related
Apr 21, 2009
I have some irregular shapes pure black on white background. I want to be able to make an outline with a fixed pixel size- quite small - less than 20 pixels around the inside edge as though I had taken a brush and carefully run it around the edge- it need to be more precise that what I can do by hand
I'm not suer yet whether the inside of the line should b hard or soft edge when it touches the colour, the outside edge can overlap the shape as it will be masked out- to leave a hard outside edge
View 3 Replies
View Related
