Revit :: Draw Railing Over The Wall Top Face
Nov 27, 2013How to draw a railing over the top of a wall? when the wall's top face is irregular. See the attached image.
View 1 Replies
ADVERTISEMENT
Revit :: Draw A Railing Using Railing Command?
May 2, 2013We're trying to draw a railing using the Revit railing command. The issue that's coming up is that we want the balusters to be placed outwards from the center (as in there's a post in the middle of the span) and the remainders at the end posts are whatever they end up being. One of the runs is small enough that the 5' baluster spacing is centered at the space (as if Revit insists on having at least a 5' space in there and it looks like this: | | | | ). What we've done for now is to tell it to space the balusters exactly the distance from center point to each end (like this: | | | ), but that means we'll have to make a new railing family for each run and that's very inefficient. Is there any way to specify what we mean by center justification?
View 4 Replies View RelatedRevit :: How To Align Curtain Wall With Edge Of Concrete Slab / Face Of Wood Framed Wall
Dec 4, 2012I am trying to align the curtain wall with the edge of the concrete slab/face of wood framed wall (Core). I have tried to align and move however the whole wall moves as well as the edge of the slab. How I can move the Curtain wall leaving the other elements in place?
View 2 Replies View RelatedRevit :: Can't Create Wall By Face
Mar 26, 2013I am trying to create wall by faces of a Mass I modelled.
This is the Mass: [URL]
Everytime I try to create a wall by face of one exactly face, it accept Location Line: By Finish Face Interior only, when I try to change ANY other Location Line, it gives me a message error.
[URL]
And it is always from the SAME FACE highlighted at the picture.
The mass was made by the floors and top edges. I select all of the edges and create a mass from down to top.
All the other faces are ok and they accept the wall by face and let them change the Location Line except this one.
Revit :: Edit Wall By Face
Feb 25, 2014I would like ask if I create wall from mass by using wall by face. However, the walls have slope and they are not connected to each other.
(Please see the picture) When I would like to edit wall only option shows in modify is update to face. Do they have any way to edit this wall as normal?
Revit :: Split Face On Curve Wall
Oct 12, 2013I tried the tool Splite Face use a curved wall,But only on straight surface is activated.
View 2 Replies View RelatedRevit :: Calculation Of The Double Face Of Wall?
Mar 11, 2013Calculation of the double face of a wall,
I’m wondering if there is a way to calculate the area of double face of a given wall. For exam, say that we have a wall of 4x4x0.1 meter then the area of one face is 16m2 while the double face is 32m2. Does the Revit calculate the double face of a given wall?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Revit :: Creating Surface In Conceptual Massing And Applying Wall By Face
Aug 9, 2013When I create the surface in conceptual mass and bring that in revit project and apply wall by face I see interior face of wall going exterior.
Can this be set in conceptual massing while creating surface so that when I apply wall by face interior face remains interior.
Revit :: How To Draw Sharp Wall Edges
Jan 23, 2013I want to make my walls to be adjusted to the ceiling.
View 1 Replies View RelatedRevit :: Trimming Wall To Roof / Making Horizontal Holes In Walls Created From Mass Face?
Dec 29, 2011I would like to know whether it is possible (and how) to trim a wall that was generated from mass face to a roof (also generated from face mass) or/and make a horizontal hole in it. The wall itself is not straight or curved, it shifts outwards from the building from base to top (still in an elevation it looks like rectangle).
View 2 Replies View RelatedRevit :: Finding The Railing Host?
Feb 25, 2014On my Revit project, I need to analise lots of stairs.
But, using the Revit LookUp, when I select one railing, I can`t identify the stair that is the host of this railing.
Or, on the other way, when I select one stair, I can`t identify the railings that are connected with that stair.
What can I do to recognize these on my code?
Revit :: Railing And Glass Baluster
Feb 9, 2012I have this railing with glass baluster. The glass baluster panel is 2'-0" in length. The railing is not on a 2'-0" modular length so the last panel extends past the corner of the railing. I can set the baluster placement to be centered on the railing which gives me a panel at each end that is extended past the corner. I understand this is normal based on my what I am asking Revit to. My question is, how can I get the 24" glass panels centered on the railing length but have the two end panels automatically adjust in lenght to make up the difference and not be 2'-0"?
View 1 Replies View RelatedRevit :: Railing Terminations Don't Show In Plan?
Nov 8, 2013I've created custom railing terminations and applied them to a handrail. They appear in every view extept plan. Railing extensions show fine. Railing Terminations don't. I am including screenshots & the families. Visibility is on for all views and all detail levels. Linetype is set to solid in Object Styles and VG. View Range is fine. Cut plane is way above the railing and bottom is unlimited.
The weird thing is that the extenstions appear in blue when the railing is selected. But they dissappear otherwise.
Revit :: Egress Path - Railing Or Detail Item
Oct 8, 2013I want to create an Egress path that automatically shows me the total length and also works through multiple levels. Cadastrophe had provided a method to do that with details. This gives good results. however, I didn't see a way to use it on stairs and multiple levels (for total length inc. mezzanines etc.)
I created a method with railings that seems to work including multiple floors and I also could schedule it (s. attached screenshot that shows me the lower floor and also the dashed Egress path on mezzanine). The way I did it was to create balusters that are shaped like arrows, and place them every 4 ft along the railing. So yes it is a bit cheating and a workaround, but works for Egress purposes.
I learned the hard way that railings aren't really families like windows etc. that I can save elsewhere, but more like walls that are not saved and manipulated separately. This also seems to apply to "handrail type", Railing", and "top Rail type". So I only could play with baluster families. However, those couldn't get shared parameters. So I'm a bit limited. I also wasn't able to create subcategories for balusters. So all the railing families are not as flexible as other families.
My concern with using railings is, how do I include actual railing on the stairs when the stair already has the "Egress railing"? And since I can't create subcategories, my views would show the "Egress railings" whenever I show normal railings. The only workaround seems to be to manually hide the railing I don't want to show in each view.
I know of the Stafford Egress method, but think what Cadastrophe provided is much better (and also what my railing does so far).
Revit :: Assign New Railing To Be Hosted By Existing Stairs
Dec 22, 2011How do you assign an exisiting stairs to be the host of a new set of railing?
View 1 Replies View RelatedRevit :: How To Make Railing And Stringer Run Continuous And Smooth
May 24, 2012Why am I getting this kind of railing and stringer? How do i make the railing and stringer run continuous and smooth?
View 3 Replies View RelatedRevit :: How To Get Wall Sweep Set Up In Type / Structure Properties To Wall Profile Has Changed
Apr 12, 2012Any way to get a wall sweep that's set up in the type/structure properties to follow a wall if that walls profile has changed. For example, in the image below, I've split the wall and adjusted it's profile to create some cheesy angled parapet. How do i get my wall cap to follow along? I thought splitting it and changing it's height would work, but no. And if I change the profile without splitting the wall the wall cap just runs right through the wall, as if the profiel was never even changed.
View 3 Replies View RelatedRevit :: Bulkhead Wall Join Skews Bottom Of Existing Wall
Jul 25, 2013I have to draw a bulkhead wall that connects to a full height wall and a gyp bd ceiling. This causes the entire end of the full height wall to skew in line with the butt joint above the ceiling level. I tried Wall Joins but all the options screw up the bottom half of the wall which needs to remain in line with the paired opposite. I also tried editing the sketch of the wall profile but Revit couldn't keep the elements joined. I tried trimming the two walls back together afterwards but the wall profile dominates and prevents a clean join above the ceiling.
Surely there's a way to have different kinds of joins at different heights?
Revit :: How To Cut Red Part Of Wall 1 / Hole In Wall 2 By Blue Rectangle
Nov 27, 2011Refer to the attached file. How can I cut the RED part of the Wall 1 (W1) , where Wall 2 is sloped. I also want to cut a hole in wall 2 (W2) by the BLUE rectangle , but why I can't do that .
I also want to add a second floor to my project but I can only see the" Level" icon goes grey and I can't click it.
Revit :: Changing Length Of A Wall And Wall Type?
Oct 31, 2013When I try to change the length of a wall it grows at both end. How to grow at one end only?
When I change the wall type to one with a different thickness, I cannot control which face of the wall remains fixed and which face moves. eg: change from 130mm to 250mm screws up my room width. How do I do this?
Revit :: Arched Hole In Wall And Wall Height
Apr 16, 2013I am trying to make a floorplan of my house in Revit 2013, but I am having an issue when it comes to one wall in my house. I have an opening in the Master Bedroom that leads to the bathroom. This wall has a weird arched-like opening in it and I have no clue how to make this in Revit. I have attached a sketch.
Also, my exterior walls are 7' tall but the interior walls start at 7' and go up to 8' once in the middle of the house and reduce back to 7". How does one set that up in Revit?
EDIT: May have made the image too small to see, but the top is not arched, it is actually half of a decagon.
Revit :: Adding Wall Sweeps To Wall Profile?
Jul 29, 2011I have a question about wall profiles. I want to make a profile on a wall so I can make Zinc Panels on the wall that are 10" X 20". I've attached a picture of what I'm going for. I'd like it to have a 1/2" spacing between them and with a joint depth of 1" and I'd like to do this is the wall type so that I can use this wall in multiple places rather than having it model-in-place. Anyway I have made a profile that is 1" X 10" so that it can become my panel profile. But when I go to add it to the wall as a wall sweep as I have seen people do I get hung up on how to make it tile up the wall and also I don't understand how to make the profile so that it is 20" wide. I have a screen shot of where I'm editing this too. Below is the link of the site.
View 8 Replies View RelatedRevit :: Drag Wall End To Edge Of Wall
Apr 7, 2013“Drag wall end” to the edge of the wall (indicated),In the attached screenshot, I wanted to drag the end of the temporary dimension from its location to the end edge of the wall but sounds not to respond!
How this temporary dimension can be dragged to the edge of the wall?
Photoshop :: A Face Morphed Into A House Or Wall?
Jun 23, 2006I want to do a similar image where the background 'becomes' the skin of the person in the foreground. In this image it's as though the house and the woman are each a bit of one another.
View 9 Replies View RelatedPhotoshop :: Wall Face Type Thing
Apr 1, 2006I'm trying to make an effect I saw on a moive, the name of it is Holloweentown 2: revenge of kalibar. In that, there is a part where a boy's face is in a brick wall, you can see his face. How can i make that? The lines of the brick wall follow every curve of his face, its like 3d, I hope you understand what I mean. I tried that with the displace filter, it doesn't work that good. I can't find a pic of that anywhere either.
View 1 Replies View RelatedRevit :: Custom Railing Insert Project To Project
Sep 9, 2011I used railing tools and created railing in the project files. i want to change rail and Baluster.i created metric baluster and rail from family and saved in the local drive. i used in to my project also it is working fine.
i want to use this railing to some other project. how to get it either copy past or revit link or any other way because the railing created in project file.
Photoshop :: How To Create Effect Of Face Pushing Through A Wall
Sep 23, 2013I'm trying to make a face look like it's pushing through a wall, a bit like in A Nightmare on Elm Street:
View 1 Replies View RelatedAutoCAD Architecture :: Drawing Wall Face To Centerline Only?
Aug 6, 2011I'm drawing individual guest rooms for a hotel that I would like to xref into the main floor plans. The walls between the rooms are 8" wide. I would like to only show half the width of those walls (4") so when xrefed againt another guest room in the main floor plan, the total width would be 8". But I would like for the one side of the 4" wall to appear as a centerline on the individual plans, but at the same time, be able to shut the centerlines off on the main floor plans. I'm new to ACA 2012 and perhaps I'm going about this in the wrong way.........?????
View 8 Replies View RelatedRevit :: Create Roof With Same Line On Top Roof Face And Vertical Side Face?
Nov 4, 2011creat roof with same line on top roof face & roof vertical side face?
View 2 Replies View RelatedAutoCAD Architecture :: Exterior Wall Face With Multiple Finishes At Different Angles?
Oct 9, 2013How can I have an exterior wall face with multiple finishes at different angles?
View 6 Replies View RelatedAutoCad 3D :: Draw Pipe 20" Dia With .594 Wall Thickness?
Aug 30, 2012what's the best way to draw pipe, say 20" dia with .594 wall thickness in 3d?
View 9 Replies View Related