I would like to know the quickest way to create face in hole type photo templates. I was at Universal studios and was impressed by the speed they could create face on body images.
I am thinking it has to do with lasso select tool with a feather on edges > invert selection.
Also what is the quickest way to make the photo face match the original face color. (is there some kind of color select to do this?)
Basically I have 2 images, 1 is a texture background and the other is a face. I wanna create the effect that the face is blended into the photo just like in this one:
[URL]........
how to edit a solid with opening a hole only one face and deleting an another face..
I added a drawing file which has a coloured face solid,I put a circle on blue face and making a hole on this face,and I want to delete red face without exploding solid,after all this I want to mesh this solid with maximum 25 units.
I'm trying to make a face look like it's pushing through a wall, a bit like in A Nightmare on Elm Street:
View 1 Replies View Relatedwhen I anchor the layer face over the background face the floating selection disappears which means I cannot work on the layer face and therfore am unable to erase the layer face into the background face,this is on gimp 2.6
View 4 Replies View RelatedWhat/how can I do to make this picture look as if paint had been slash on the door.
View 1 Replies View RelatedI've been interested in using GIMP to create a multicolor streamer effect similar to that on the American cover of Manifold: Space (image here). The problem is that I'm not sure what tools, settings and/or effects to use to make such an effect.
View 2 Replies View RelatedI want to create a light/shadow effect using GIMP. Similar to the image in the following link :
[URL].......
This has been set as a background in this main home page :
[URL].........
How to create such thing .
The goal is to create the trailing effect of a word.
It should look as if the word is coming from the center of the screen to the forefront, either to the top or the bottom of the screen.
About a year ago I created this picture using gimp (ignore the text) .
My problem is that I have completely forgotten how I did it and now I need to know how.
So how to create the blend effect in the upper right of the circle (again don't worry about the text)?
I want to create something like this:
The text is in farsi, and i don't even know how to make it in center, like the photo.
Is there a way to use this program to create a double exposure effect? Ican do it with my 35mm camera manually while taking pics. But was not sureif you can create the same digitally?
View 8 Replies View RelatedHow to create a cool rainbow nebula text effect that you can play with. This is a fairly easy effect to achieve.
The result will look something like this:
1. Create a New project and set your dimensions. In this case, I am going to use 500 x 200. This part is up to you.
2. I think this effect goes best with a dark color(black) so use the fill tool to turn your background black(or your color pick if it is different).
3. Next, add your text using the text tool. I believe the font Century Gothic goes well with this. However, I am going to use my logo with this. Make sure whatever you do, if you use your logo or not, that your subject is white.
4. Right-click on the text/logo layer in the layer panel and select Alpha to Selection. Then create a New Layer and go the Filters→Render→Clouds→Plasma and click OK. Put this layer on the below the text one if it is not already.
5. Now Gaussian Blur the text layer by 5 pixels and set the Layer Mode to Overlay.
6. (This step is optional. I am going to do it though because it gives a good result in my opinion.) Duplicate the Plasma Layer and Gaussian Blur it by 5 pixels. Then you can play around with the opacity with the Layer Mode on Screen, I set mine to 50%. Then duplicate the text layer and lower the opacity which I did to 50%. This gives the text more shine.
The result will look something like this:
Not sure if GIMP can actual do this.
I am looking to create text words that have a silver/bright mirror effect. The effect might look like silver liquid (water) effect. Or do you know what software it could be designed on.
creat roof with same line on top roof face & roof vertical side face?
View 2 Replies View Relatedcover of rap artist 50 Cent's "Get Rich Or Die Trying" album?
How do you get the bullet-hole-and-broken-glass effect on Photoshop? Am still on PS6
I have been obsessed with this effect, but have never been able to manage it (at least not on pictures of me). Apparently it's not a secret, because people have figured it out, like in these two album covers I have attached. (Fallen by Evanescence and Burlesque) Now, I also realize it's possible that Photoshop may be the only program that can achieve this (with the masking tool maybe?) and Paint.net can't. I just need to know these things. It's difficult for me to attempt, how to phrase my question without photos.
View 1 Replies View RelatedI have a series of tubes joined end to end to produce a long tube in several sections. I need to put a glow effect on the inside face for the full length, but have a graduated effect so that one end is glowing very hot, and then have a smooth transition to warm at the other end.
I tried applying individual glow effects to each section but the stepping is obvious.
I then tried adding a glow effect with a Gradient map added to the "Additional effects" on the options tab. This didn't seem to do much and there don't appear to be any parameters to control the gradient.
What is the best way to achieve the desired effect?
I really need to achieve this effect of half face covered with a mud mask like in the picture attached below
and it has to be a very realistic effect. But no matter how much i tried i don't manage to get it right .
I have encountered a problem with the bevel effect of corel draw that I can't seem to resolve. I have a vector image and I convert to curves. Click on effects/bevel/soft edge bevel. I set my distance, I set my shadow colour & light colour and when I apply the bevel it changes the face colour to a murky combination of the original vector colour/shadow colour & light colour. I do not want to change the face colour of the text in any way.
View 7 Replies View RelatedI am basically new to inventor and I would like to get any tips from this forum on how to go about creating a pocket hole like the Kreg Jig. I am a woodworker so this would come in very handy when I am building furniture sketches.
View 9 Replies View RelatedI have one part like below attachment image.in this part using patten in part level in single pattern only how to maintain different types of pitches.
View 1 Replies View Relatedis it possible to create a hole note without pitch.
i use standard thread in most cases so i just want the thread to be shown in the holenote tool on drawings (like M8 not M8x1,25)
I need to create a hole table for a part. I would like the origin to be at the center of the part. Problem is there is not a round hole at that location. Attached is a similar part. The one that I am doing is much larger and has many more holes... this is just an example.
How can I pick this as the origin of my hole table?
I created a cylinder with a hole through the center and need to add holes through the face into the center hole and I can't figure out how.
View 9 Replies View RelatedIm new in Inventor and I have a problem with creating a hole through two parts beacause they are a bit angled. Im creating the holes part by part and Im using the work point method. But unfortunately this is the result:
Im wondering if there is any other methods so I can get the holes coinciding?
I am trying to make a target with a bullet hole on it. I am using the Ellipese tool. When I drag the box to the size of circle I want, I click away to make another one inside and the first one disappears. How do I make it stay....I feel like I need to hit the enter button. I am working with a transparent layer....if that matters.
View 3 Replies View RelatedI'm trying to create a hole in a sheet-metal part so that a pipe can be welded in it, see attached picture. What's the best method to do this? Because the flat-pattern of this hole isn't an ellipse-shape (more like an egg), it seems it's very difficult to do.
Product Design Suite 2014
Inventor 2012 SP2, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
Here's something that should be simple, I want to create a template for cutting a square hole 125 mm on a side.
I have gone into Drawing Utilities and set the units to millimeters. I drew a square 125 units on a side.
In paper space, I selected a template that is 11" X 17". I set the scale to 1:1. I thought that that would give me a sheet I could print out ledger size with a 125mm square drawn on it, but no, it is not even close. As near as I can figure, the square is 125" on a side in paper space.
How to create hole or drill chart table in AutoCAD LT 2014
View 3 Replies View RelatedI need some instructions on how to make the small hollow hole on the tag shown in the pic below in illustrator.
View 3 Replies View Related
