Illustrator :: Create Hollow Hole To Reflect Underlay Background
May 1, 2013I need some instructions on how to make the small hollow hole on the tag shown in the pic below in illustrator.
View 3 Replies
ADVERTISEMENT
Revit :: Display Underlay Over Background Raster Image?
Nov 8, 2012I'm redoing some old projects in Revit, and I'm using a background image to vastly facilitate the process as the projects are almost perfectly drawn, I'd like however, to use a background image as reference and keep the underlay (e.g.: show the bg image for level 2 and over it show the level 1 underlay) but I couldn't find a way to do that.
View 2 Replies View RelatedIllustrator :: Make Hollow Letters?
Apr 19, 2013I mean the background can show through. With the Pathfinder, I suppose -but how?
View 6 Replies View RelatedIllustrator :: Can Draw A Hollow Stroke
Dec 21, 2013I want to draw with my tablet using the paint brush, pencil, or pen, but I want the stroke to be hollow or another color down the middle. Like it has a fill...
I thought I might be able to do this with the blob brush at least, but it doesn't seem to let me draw with a stroke and fill set.
Bellow is a visual of what I'd like to achieve:
I did this by first drawing a line, then outlining the stroke, but the point is I want to be able to draw lines like this as I go, not constantly convert to outlines...
AutoCAD Inventor :: How To Create A Pocket Hole
Apr 2, 2012I am basically new to inventor and I would like to get any tips from this forum on how to go about creating a pocket hole like the Kreg Jig. I am a woodworker so this would come in very handy when I am building furniture sketches.
View 9 Replies View RelatedGIMP :: Create Face In Hole Effect
Aug 1, 2011I would like to know the quickest way to create face in hole type photo templates. I was at Universal studios and was impressed by the speed they could create face on body images.
I am thinking it has to do with lasso select tool with a feather on edges > invert selection.
Also what is the quickest way to make the photo face match the original face color. (is there some kind of color select to do this?)
AutoCAD Inventor :: How To Create Pattern Different Hole Pitches
Aug 6, 2012I have one part like below attachment image.in this part using patten in part level in single pattern only how to maintain different types of pitches.
View 1 Replies View RelatedAutoCAD Inventor :: Create A Hole Note Without Pitch?
Nov 9, 2012is it possible to create a hole note without pitch.
i use standard thread in most cases so i just want the thread to be shown in the holenote tool on drawings (like M8 not M8x1,25)
AutoCAD Inventor :: Create A Hole Table For A Part
Mar 8, 2013I need to create a hole table for a part. I would like the origin to be at the center of the part. Problem is there is not a round hole at that location. Attached is a similar part. The one that I am doing is much larger and has many more holes... this is just an example.
How can I pick this as the origin of my hole table?
AutoCAD Inventor :: Create A Cylinder With Hole Through Center
Jan 29, 2013I created a cylinder with a hole through the center and need to add holes through the face into the center hole and I can't figure out how.
View 9 Replies View RelatedAutoCAD Inventor :: Create Angled Hole In Assembly
May 26, 2013Im new in Inventor and I have a problem with creating a hole through two parts beacause they are a bit angled. Im creating the holes part by part and Im using the work point method. But unfortunately this is the result:
Im wondering if there is any other methods so I can get the holes coinciding?
AutoCAD Inventor :: How To Create Odd Shaped Hole In Sheetmetal Part
Jul 3, 2012I'm trying to create a hole in a sheet-metal part so that a pipe can be welded in it, see attached picture. What's the best method to do this? Because the flat-pattern of this hole isn't an ellipse-shape (more like an egg), it seems it's very difficult to do.
Product Design Suite 2014
Inventor 2012 SP2, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
AutoCAD LT :: Create Template For Cutting Square Hole 125 Mm On A Side?
Jun 29, 2012Here's something that should be simple, I want to create a template for cutting a square hole 125 mm on a side.
I have gone into Drawing Utilities and set the units to millimeters. I drew a square 125 units on a side.
In paper space, I selected a template that is 11" X 17". I set the scale to 1:1. I thought that that would give me a sheet I could print out ledger size with a 125mm square drawn on it, but no, it is not even close. As near as I can figure, the square is 125" on a side in paper space.
AutoCAD LT :: How To Create Hole Or Drill Chart Table In 2014
Jul 10, 2013How to create hole or drill chart table in AutoCAD LT 2014
View 3 Replies View RelatedAutoCAD Inventor :: Hole Table Formatting - Different Text Depending On The Type Of Hole
Nov 6, 2012I've got a template with a set of Object defaults for an Inch drawing and a set for a Metric drawing. I've just noticed that within my metric set, if I insert a hole table with tapped holes, the font on the tapped holes doesn't match the other hole types. I'm searched around, but all the settings for the hole table style reference the same text style. (Please see the attached image.)
So is there a way to set a certain hole type to have a certain font or size within a hole table? Because if there is, I'd obviously like to remove it..... But I can't seem to figure out where the issue is.
AutoCAD Inventor :: Ultimate 2013 - Cannot Add Hole To Existing Hole Chart
May 22, 2012I am trying to add a hole to an existing hole chart. I drop the part into a new drawing, set the ordinate "zero", and add a hole chart by selecting a few holes. When I attempt to edit the chart: click chart, right click "edit", click add hole, select new holes, right click to create, the "create" selection is greyed out and all I have to choose from is cancel. I searched the forum here but could not find a reference to this a know issue. Am I doing something wrong or is this a glitch of 2013.
We are running win7 x64 machines and this happens on both the 2013 Ultimate and Premium editions of the product.
AutoCAD Inventor :: Can't Select Hole Edges When Creating Hole Table
Nov 19, 2012I have had this problem intermittently for a few weeks since going to Inventor 2013 SP1.1. I have a part within an assembly and that part has holes created in it before assembling it with other parts. Now when I try and create a hole table in a drawing of the assembly I cannot select hole edges and the hole table is blank when trying to create it automatically from view selection. I originally thought it may be an alignment issue but I have since aligned everything correctly and it still persists. I can create the hole table if I import in just the part into the drawing but it will not allow me to create the table on the whole assembly.
I can also create the hole table if I use "centred pattern" and create cross hairs on all of the holes however it does not give me correct annotations for the holes as shown in attachment and I can manually change the annotations but seriously this should not be required. As shown in the screen shot it reads as A1 down to K1 instead of A1 to A10. .
AutoCAD Inventor :: Control Hole Dimensions Called Out On Hole Chart?
Nov 28, 2012Question: Is it possible to control the Hole Dimensions called out on the Hole Chart? As in controling leading/trailing zeros for main hole dim, alt home dim and tolerances? Can you combine the Main Dim with the Alt dim in a single column, separated with parentheses? (same with tolerance?)
View 5 Replies View RelatedAutoCAD Inventor :: How To Create LOD With Hole Feature Suppress At Assembly Level
Sep 3, 2013In order to reflect production process, I have to create holes on the bent pipe at assembly level after 2 bent pipes are welded to the straight pipe. Now when I suppress holes, it does not suppress only at LOD or view rep but throught the whole assembly.
Is it possible to suppress features such as hole using LOD or view rep, which are made at the assembly level? or I have to use another method? See below in highlighted.
AutoCAD Inventor :: Use Hole Command To Place A Hole In A Part
Oct 19, 2012I would like to use the hole command to place a hole in a part. When I place the hole it won't allow me to use one of the origin planes to locate the hole from. Can I only locate holes off edges?
View 4 Replies View RelatedAutoCAD Inventor :: How To Get Hole Location Without Using Hole Placement Definition
Apr 27, 2012I have an assembly that contains a part and a hole feature (the hole feature is at the assembly level). Using the api, I'm trying to get the hole location relative to the part's coordinate system in a without using the holeplacementdefinition.distance property, this way I can get the hole location regardless of the way it was defined.
View 2 Replies View RelatedAutoCAD Inventor :: How To Get Hole Names In Hole Table
Aug 28, 2013i use hole feature names in hole table.
i assign hole names attribute to hole feature but dont get attribute hole table.
how to get hole names in hole table.
AutoCAD Inventor :: Hole Count During Hole Creation?
Jun 17, 2013While creating holes in a part, a small counter shows (when you click on a point) of how many holes there are.
Programs:
Solidworks (1998-2011)
Autodesk Inventor (R8 - 2013)
Autodesk AutoCad 2D
Autodesk AutoCad 3D
Catia V5
SolidEdge
Anvil (Very old program!)
Pro/E
Illustrator :: PNG Cut Transparent Hole Into Shape?
May 16, 2012I have a .PNG file. I have a rounded rectangle. I want to take the .PNG shape that I have and cut that shape (transparent) into the rounded rectangle.
Using CS 5.5.
Illustrator :: Make A Hole Through Bunch Of Objects
Jun 22, 2009I have a number of objects stacked on top of each other and I want to make a hole through them all so that when I save the finished artwork as a web image the hole will be transparent. A bit like a donut but it's not just a circle with a hole in it. It's all these other shapes piled on top of each other.
I've thought about the Eraser Tool but my hole needs to be quite precise (and there are to be four separate holes). I have looked at making a clipping mask but I can only really find tutorials that show me how to clip like making a photo vignette and I've thought about Pathfinder.
Illustrator :: How To Make Rectangle Hole In 3D Sphere
Aug 10, 2012How can I build a 3d sphere shape with a rect hole in it (simil to pacman)? Something like this, but with a real 3d shape (so I could change the perspective having all the shades and lights etc...):
View 20 Replies View RelatedIllustrator :: Import Image Into Hole Pattern And Show Only Outlines?
Jun 5, 2012I have a small problem: I have several images which I need to import / combine with an hole pattern. Then I just need the outlines of the holes (each color) for laser cutting. Doing by hand and coloring each dot is difficult, how to make this in some few steps ?
View 2 Replies View RelatedAutoCAD Inventor :: Cannot Create Thread Hole (thread Option Is Grey Out)
Apr 22, 2013My colleague installed IV2013. He has excel 2010 installed in his PC also. However he cannot create thread hole (thread option is grey out).
View 4 Replies View RelatedPhotoshop :: Action For Vertical Reflect Shade Trick
Jul 15, 2007Does anyone know if there is a Photoshop or Illustrator action or plug-in we can purchase that can create the reflection shades underneath the images that are cropping up online. Examples would be here: ..
View 5 Replies View RelatedAutoDesk Smoke :: How To Refresh Back Clip Of CFX To Reflect The Changes
May 6, 2013I'm working on a simple effect that consists of three layers. The bottom layer is a background, the middle layer a gap effect with text and the top layer is a CFX layer. In that CFX layer is the back clip which is made up of the middle and bottom layers and a text node. The back clip is piped into an action background and the text node is an action layer. I'm doing a simple light bloom on the text inside of action.
If I understand CFX back clips correctly, shouldn't it update if a make a change to the middle or bottom layers? In this case it's not. I have to save my action and text nodes, go back out to the timeline, delete the CFX and create a new one. Then go back into CFX and re-apply the action and text nodes that I saved.
Is there a way to refresh the back clip of CFX to reflect the changes made underneath it?
AutoCAD Inventor :: IPart Members Reflect Changes To Factory
Aug 5, 2013We are facing a strange behaviour, since we switched from network folders to Vault 2011 Professional.
If we create a new revision of an iPart factory and make changes to that factory, members that are placed in assemblies already reflect the changes, although they have not been revisioned and re-generated. It seems like the member is already fetching the latests revision of the factory from Vault by default.