How can I build a 3d sphere shape with a rect hole in it (simil to pacman)? Something like this, but with a real 3d shape (so I could change the perspective having all the shades and lights etc...):
View 20 RepliesSo I'm a novice at making 3D objects in Illustrator. I'm attempting to make a cut sphere in Illustrator. I'm not sure if what I want to achieve is best done through pen tool and gradients or 3D revolve. Here are some screenshots of my attemps thus far:
This one is with the pen tool:
This is as far as I got with the 3D Revolve:
I'm trying to have a sphere within a sphere, with the outer sphere being cut revealing some of the inner sphere. The outer sphere will have a lower opacity.
I have a number of objects stacked on top of each other and I want to make a hole through them all so that when I save the finished artwork as a web image the hole will be transparent. A bit like a donut but it's not just a circle with a hole in it. It's all these other shapes piled on top of each other.
I've thought about the Eraser Tool but my hole needs to be quite precise (and there are to be four separate holes). I have looked at making a clipping mask but I can only really find tutorials that show me how to clip like making a photo vignette and I've thought about Pathfinder.
Ok so i am making a signature with a video included and i want to cut a rectangle into a box that i made so that the middle is transparant.
whenever i use marquee and select over the area i want to delete and press 'delete' it deletes the whole box.
I am selecting the right layer i know that for sure. Wondering if its something i have enabled maybe.
I'm having the hardest time creating a marquee style image in illustator.. (something like this:
[URL]....
So far i've been able to make the rectangle witht he curved angles, but can't seem to get the circles inside of the marquee..
Any tutorial or a quick guide that can create one?
I am working in cs6 for Illustrator and Photoshop. I would like to make a rounded rectangle with an inner border. The area between the two borders I would like to add a decorative paper that I created in Photoshop. The large center remains white. I've tried clipping it, but apparently did not do it correctly. How to accomplish this?
View 10 Replies View RelatedI am trying to make the hands of a clock with a small red rounded rectangle near the top. But as I rotate the shape the lines are no longer straight. The hands of the clock are invisible but a bounding box for the small rounded rectangle. It won't stay straigh either. I have tried everything I can paths, etc.
View 4 Replies View RelatedThe best that work out was giving it a path constrain to a sphere changing to a rectangle and making some snapshot which it does not give me the specific control I need.
See image to see what I am trying to model, image is from NADAA, and am trying to do something similar to this but I can't.
Any quick tips to convert an expanded appearance rounded rectacngle back to a sharp cornered rectangle?
View 6 Replies View RelatedRefer to the attached file. How can I cut the RED part of the Wall 1 (W1) , where Wall 2 is sloped. I also want to cut a hole in wall 2 (W2) by the BLUE rectangle , but why I can't do that .
I also want to add a second floor to my project but I can only see the" Level" icon goes grey and I can't click it.
I'm having a challeng with creating the look I want using 3D Revolve. The sphere is part of a logo, and needs to essentially match the color of part of the logo, but I also want it to have a smooth 3D quality. To start, here's the color I want to be predominant in the sphere: Here's what I've come up with thus far:This is as close as I've been able to get to the original color, but there's no gradation between the shades. Here are the 3D Revolve settings:
Surface: Plastic Shading
Light Intensity: 50%
Ambient Light: 70%
Highlight Intensity: 95%
Highlight Size: 95%
Blend Steps: 256
Shading Color: Black
And here's another experiment: This has the blend from dark to light I'm looking for, but the base color has become much more purple, and doesn't really match the original. Here are the settings for this version:
Surface: Plastic Shading
Light Intensity: 40%
Ambient Light: 0%
Highlight Intensity: 100%
Highlight Size: 100%
Blend Steps: 50
Shading Color: None
I've played around with diffuse shading, but haven't even come as close as these two samples. So basically, what I'm looking for is the base color of the first sample (maybe a little lighter), with the blend from dark to light of the second.
I've created 2 custom symbols to wrap around my sphere, but the more complex one will not map!
View 1 Replies View RelatedHow do I make a transparent hole in CS6? I've tried the ellipse tool>stroke>blend opacity to 0, but that just clears the gray circle. It does not create a clear hole.
Just so you know, I have a square psd in a file with numerous other layers and I want to make it round and put a transparent circle in the center to make a DVD label. That's what I'm after and I can't believe I forgot how to do this.
I have created a sphere and mapped some type around it. However, I can't figure out how to knock out the sphere to 'clear' so I ONLY see the type and not the sphere (I'm placing the type on top of something else). I've done some searching online with no success.
View 2 Replies View RelatedIf one chooses 'Drop Shadow' with text, it appears as if the text is floating over the image. I would like to do the opposite. I would like it go inwards as if it's a hole. Like when you scratch your name on a tree or carve into ice. How to do such a thing?
View 1 Replies View RelatedI am trying to make a target with a bullet hole on it. I am using the Ellipese tool. When I drag the box to the size of circle I want, I click away to make another one inside and the first one disappears. How do I make it stay....I feel like I need to hit the enter button. I am working with a transparent layer....if that matters.
View 3 Replies View RelatedEverytime I make a sphere, even if I restart illustrator and make a new document, I get that ugly dark spot in my image. I don't know what the heck it is. I've tried everything I could think of to get rid of it, but I can't seem to.
The way I made the shere was by taking an elipse, making it into a perfect circle and then using the scissor tool to make it into a half-circle, then using the Effect>3D>Revolve Menu option to generate a sphere.
Here's the effect I'm going for, maybe a bit more glow and lines do not need to arc like that: [URL]
And like this: [URL]
I'm having a couple of problems: 1) if I put the network lines on the map it looks too flat so I think I need to apply them to a slightly larger invisible sphere; 2) when I add a blur/outer glow to the lines they do not wrap cleanly on the sphere, they kind of break up and distort. Plain lines do not seem to have this problem but objects with effects do.
I have created a sphere shaped logo for a client in AI. I've used the 3D revolve function and mapped clouds over the top of it (the clouds were drawn initially as a shape).
The client is suggesting that the sphere is not perfectly crisp and that you can see some slight stepping in the curve around the sphere and the curve around the clouds mapped to the sphere. I've not come across this before (not sure if she's just being really picky, blowing the logo up too large for scale, or I'm just missing something really stupid!).
Anything to tighten the curve of the sphere so that it is crisper?
I can definately see her point in the clouds mapped on top of it - perhaps if I try more anchor points on the clouds path, that may tighten the curve on the clouds? Is this something I can do automatically?
Also, what are the best settings to export out for the crispest format (ie, Progressive Compression + 300 dpi resolution + Art Optimised sampling?).....
Sample above -
Can i make center hole by Din With Autodesk Inventor . I know with Mechanical Desktop...
Autodesk inventor Design Suite Premium 2012
Windows 7 x64, 750 GB harddisk
Intel core i5 Cpu @3.2 GHz, 8 GB Ram,
nVidia Quadro 2000 D Graphics Card
Inventor will not let me make a hole on the top of my object. The hole conformation button is grayed out no matter what the parameters are. I have tried to extrude a hole from a circle and same deal; it will not let me extrude the circle.
View 9 Replies View Relatedim trying to skin a jukebox program and im using this button , i need to make it a rectangle with slight rounded corners if possible
Also when i save my image as png file on transparent background it saves with a white square around it and then when i put it into the juke software it shows up some bits of background , am i doing something wrong here?
I was using a tut on how to make a circle. I clicked file then new then I picked circle and went to drag it to do the circle and the icon was a hand. When I tried to use other shapes the same thing happened. I just bought Creative Suite 4 (Web Premium) and I'm using PS CS4 Extended.
View 8 Replies View RelatedI have a picture of a gravestone on the wall of a church. Because of access I had to take the picture from below so that the resulting image is a regular trapezoid, being longer at the base than at the top.
How can I make the image into a rectangle? Effectively I need to expand the width of the image at the top whilst keeping that at the bottom the same, with everything between being expanded in the right ratio. I am not worried if the images of the brickwork around the stone are distorted - I can remove them.
I've got a template with a set of Object defaults for an Inch drawing and a set for a Metric drawing. I've just noticed that within my metric set, if I insert a hole table with tapped holes, the font on the tapped holes doesn't match the other hole types. I'm searched around, but all the settings for the hole table style reference the same text style. (Please see the attached image.)
So is there a way to set a certain hole type to have a certain font or size within a hole table? Because if there is, I'd obviously like to remove it..... But I can't seem to figure out where the issue is.
I am trying to add a hole to an existing hole chart. I drop the part into a new drawing, set the ordinate "zero", and add a hole chart by selecting a few holes. When I attempt to edit the chart: click chart, right click "edit", click add hole, select new holes, right click to create, the "create" selection is greyed out and all I have to choose from is cancel. I searched the forum here but could not find a reference to this a know issue. Am I doing something wrong or is this a glitch of 2013.
We are running win7 x64 machines and this happens on both the 2013 Ultimate and Premium editions of the product.
I have had this problem intermittently for a few weeks since going to Inventor 2013 SP1.1. I have a part within an assembly and that part has holes created in it before assembling it with other parts. Now when I try and create a hole table in a drawing of the assembly I cannot select hole edges and the hole table is blank when trying to create it automatically from view selection. I originally thought it may be an alignment issue but I have since aligned everything correctly and it still persists. I can create the hole table if I import in just the part into the drawing but it will not allow me to create the table on the whole assembly.
I can also create the hole table if I use "centred pattern" and create cross hairs on all of the holes however it does not give me correct annotations for the holes as shown in attachment and I can manually change the annotations but seriously this should not be required. As shown in the screen shot it reads as A1 down to K1 instead of A1 to A10. .
Question: Is it possible to control the Hole Dimensions called out on the Hole Chart? As in controling leading/trailing zeros for main hole dim, alt home dim and tolerances? Can you combine the Main Dim with the Alt dim in a single column, separated with parentheses? (same with tolerance?)
View 5 Replies View RelatedI would like to use the hole command to place a hole in a part. When I place the hole it won't allow me to use one of the origin planes to locate the hole from. Can I only locate holes off edges?
View 4 Replies View RelatedI have an assembly that contains a part and a hole feature (the hole feature is at the assembly level). Using the api, I'm trying to get the hole location relative to the part's coordinate system in a without using the holeplacementdefinition.distance property, this way I can get the hole location regardless of the way it was defined.
View 2 Replies View Relatedhow can i make the rectangle looks with strict Edges ,it looks like 1 more blure pixel
View 3 Replies View Related