Can i make center hole by Din With Autodesk Inventor . I know with Mechanical Desktop...
Autodesk inventor Design Suite Premium 2012
Windows 7 x64, 750 GB harddisk
Intel core i5 Cpu @3.2 GHz, 8 GB Ram,
nVidia Quadro 2000 D Graphics Card
I created a cylinder with a hole through the center and need to add holes through the face into the center hole and I can't figure out how.
View 9 Replies View RelatedWe've got a sketched symbol that locates to the center of holes on a part.Problem is, the symbol either doesn't recognize the hole's center and even if it does, the center of the symbol (the designated insertion point) jumps to the edge of the hole.I've even recreated the symbol and I get the same effect.
View 9 Replies View RelatedThe objective is to section a part, selecting a center of the hole (side view, not top view) to attach the section line.
In the hole's top view we can select the center hole to attach the section view, but in the side view, i can´t find any attach point, even if i have a center line.
I know we can edit the section line later and create some construction lines to center the section line with the hole, but i wonder, there's a better process, more automatic, to achieve this?
Inventor will not let me make a hole on the top of my object. The hole conformation button is grayed out no matter what the parameters are. I have tried to extrude a hole from a circle and same deal; it will not let me extrude the circle.
View 9 Replies View RelatedI am starting to use Autodesk 360 a little now. Mainly with new Inventor 2014 projects.If I have a project file setup on 360 that I can access from work and from home. Home does content center parts work?
So if I insert a content center part in assembly while working at home will work pc load up the same part when I open assembly at work?Must I have content center mapped to 360 drive or?
Just a general Content Center question: does Autodesk plan to update (add more parts to) the library at any time in the near future? We really could use some pvc pipe and fittings. Also, fix the MC/C library shapes (they are all MC profiles, not any C's). I'm sure there are a number of additions to be made, but it seams that nothing new has been added for a few releases that I am aware of.
Product Design Suite Ultimate 2014
Vault Professional 2014
Windows 7 Pro SP1
HP-Z400: 2.67 GHz 12 Gb Ram
Nvidia Quadro FX1800 driver 276.42
I've got a template with a set of Object defaults for an Inch drawing and a set for a Metric drawing. I've just noticed that within my metric set, if I insert a hole table with tapped holes, the font on the tapped holes doesn't match the other hole types. I'm searched around, but all the settings for the hole table style reference the same text style. (Please see the attached image.)
So is there a way to set a certain hole type to have a certain font or size within a hole table? Because if there is, I'd obviously like to remove it..... But I can't seem to figure out where the issue is.
I am trying to add a hole to an existing hole chart. I drop the part into a new drawing, set the ordinate "zero", and add a hole chart by selecting a few holes. When I attempt to edit the chart: click chart, right click "edit", click add hole, select new holes, right click to create, the "create" selection is greyed out and all I have to choose from is cancel. I searched the forum here but could not find a reference to this a know issue. Am I doing something wrong or is this a glitch of 2013.
We are running win7 x64 machines and this happens on both the 2013 Ultimate and Premium editions of the product.
I have had this problem intermittently for a few weeks since going to Inventor 2013 SP1.1. I have a part within an assembly and that part has holes created in it before assembling it with other parts. Now when I try and create a hole table in a drawing of the assembly I cannot select hole edges and the hole table is blank when trying to create it automatically from view selection. I originally thought it may be an alignment issue but I have since aligned everything correctly and it still persists. I can create the hole table if I import in just the part into the drawing but it will not allow me to create the table on the whole assembly.
I can also create the hole table if I use "centred pattern" and create cross hairs on all of the holes however it does not give me correct annotations for the holes as shown in attachment and I can manually change the annotations but seriously this should not be required. As shown in the screen shot it reads as A1 down to K1 instead of A1 to A10. .
Question: Is it possible to control the Hole Dimensions called out on the Hole Chart? As in controling leading/trailing zeros for main hole dim, alt home dim and tolerances? Can you combine the Main Dim with the Alt dim in a single column, separated with parentheses? (same with tolerance?)
View 5 Replies View RelatedI would like to use the hole command to place a hole in a part. When I place the hole it won't allow me to use one of the origin planes to locate the hole from. Can I only locate holes off edges?
View 4 Replies View RelatedI have an assembly that contains a part and a hole feature (the hole feature is at the assembly level). Using the api, I'm trying to get the hole location relative to the part's coordinate system in a without using the holeplacementdefinition.distance property, this way I can get the hole location regardless of the way it was defined.
View 2 Replies View Relatedi use hole feature names in hole table.
i assign hole names attribute to hole feature but dont get attribute hole table.
how to get hole names in hole table.
While creating holes in a part, a small counter shows (when you click on a point) of how many holes there are.
Programs:
Solidworks (1998-2011)
Autodesk Inventor (R8 - 2013)
Autodesk AutoCad 2D
Autodesk AutoCad 3D
Catia V5
SolidEdge
Anvil (Very old program!)
Pro/E
I'm can't make a center point. how comes
View 5 Replies View RelatedI have a three button mouse. I can use Shift + Center button to orbit my drawing. problem it, the stuff is always flying off the screen because the pivot point is at the center of the drawing / part / assembly/etc. This annoys me to no end. How do I change the Orbit Pivot to default to the center of the screen?
View 3 Replies View RelatedJust got a Space Navigator the other day, pulled it out of the box all excited that i would be able to rotate models about the center of the camera, which would allow me to get into really tight spots, rotate the model and not have other parts of the model move in front of the camera, therefore blocking my view of what i was trying to see. So out it comes, all software loaded, inventor is open with a tidy structural assembly sittign there waiting to be manipulated by my new shiny toy, and uh no. CAN'T ROTATE ABOUT THE CAMERA! AARRGGGH. right bummer.
I'm pretty sure its an Inventor problem since i know for a fact that you can rotate about the center of the camera usign this device in 3ds max. The 3D navigation tools in inventor are crap anyway, the feature of being able to rotate about camera center should be native in inventor.
using any of 3D connexions devices in Inventor and maybe they have a work around for this. I'm pretty sure i read somewhere that with practice people have been able to 'fly' down pipes in Inventor. But my experience so far would mean that once you get to a bend in the pipe and you rotate the view, you would just rotate yourself straight out of the pipe.
Completed a project. Wanted to show the customer the end result and go over changes on my laptop. Copied the directory to my laptop. None of the Nuts & bolts will show up on the laptop version. Got a new desktop computer. Same problem. My completed version doesn't show the content center items, Hence drawings & assemblies are always un-resolved. How can I get the Content center files to show up without deleting and reinserting the items.
Also how can I make the content center parts I place into the model reside in the local path.
How to make a Gear in autodesk?
View 4 Replies View RelatedI've got an urgent fix to do for some CD artwork, sadly I am far from being a photoshop guru and I don't have time to send it back and get it redone.
Basically, I have a load of text spiraling inwards towards the center of the disk but it ends up a bit too close to the center. I need to enlarge the hole in the middle without distorting the text too much.
My first thought was to try the Filter/Distort/Spherize effect and indeed this does make the hole proportionally bigger but it also makes the text near the edge much smaller than the text near the center.
I need some kind of radial or spiral transform/distortion that will maintain the proportion of the lettering, although roughly would be fine, it doesn't need enlarging very much.
I am using photoshop 7,
I draw a spline (gmask) and when it overlap itself, it will cut a hole. Can we change this kind of setting? I know it's already like this from the beginning but honestly what is the BIG reason to have this behavior ?
Also in gmask node, how to delete multiple spline without going to gmask schematic ? why can't just simply select multiple spline icon and press 'del' ?
I am trying to make an assembly copy as separate project using the iLogic Design Copy feature.
Everything seems fine except I do not have my involved in assemblyContet Centerparts in this copy.
I am also have no any possibility to chose the Content Center folder in the iLogic Design Copy feature as it does not showup there.
[URL]
I'm having some fits with the constrained orbit center. It seems to me that It used to always be in the center of the screen when I would use Shift and CMB. Now it seems to be stuck on the center of my assembly/part. I know that I can hit F4 and long select LMB to re-center but I have never had to do that before the last day or two. I have uninstalled all the Beta Add ins I had installed and I have even uninstalled and reinstalled Inventor Pro 2014.
Is there an option somewhere that puts the default Orbit Center to the center of the screen?
How do I make a transparent hole in CS6? I've tried the ellipse tool>stroke>blend opacity to 0, but that just clears the gray circle. It does not create a clear hole.
Just so you know, I have a square psd in a file with numerous other layers and I want to make it round and put a transparent circle in the center to make a DVD label. That's what I'm after and I can't believe I forgot how to do this.
If one chooses 'Drop Shadow' with text, it appears as if the text is floating over the image. I would like to do the opposite. I would like it go inwards as if it's a hole. Like when you scratch your name on a tree or carve into ice. How to do such a thing?
View 1 Replies View RelatedI am trying to make a target with a bullet hole on it. I am using the Ellipese tool. When I drag the box to the size of circle I want, I click away to make another one inside and the first one disappears. How do I make it stay....I feel like I need to hit the enter button. I am working with a transparent layer....if that matters.
View 3 Replies View RelatedI have a number of objects stacked on top of each other and I want to make a hole through them all so that when I save the finished artwork as a web image the hole will be transparent. A bit like a donut but it's not just a circle with a hole in it. It's all these other shapes piled on top of each other.
I've thought about the Eraser Tool but my hole needs to be quite precise (and there are to be four separate holes). I have looked at making a clipping mask but I can only really find tutorials that show me how to clip like making a photo vignette and I've thought about Pathfinder.
How can I build a 3d sphere shape with a rect hole in it (simil to pacman)? Something like this, but with a real 3d shape (so I could change the perspective having all the shades and lights etc...):
View 20 Replies View RelatedIs there a way in the description field of an Inventor hole table to have mixed units? Some hole sizes at fractions, some at 2 plc, and others at 3 places.
Inventor Pro 2013 or 14
I am working on some VB code to reterive the dimensions fron an IDW and put them on an excel spreadsheet for an Inspection report. I found some code to which gets the linear dimensions and have added tolerance type and tolerance bands.
I have been unable to get the hole notes off the IDW. Got the general notes to work with the following
Dim invDrawNotes As Inventor.DrawingNotes
Dim invActDrawNotes As Inventor.DrawingNote
Set invDrawNotes = invActSHT.DrawingNotes
[Code]....