Ok so i am making a signature with a video included and i want to cut a rectangle into a box that i made so that the middle is transparant.
whenever i use marquee and select over the area i want to delete and press 'delete' it deletes the whole box.
I am selecting the right layer i know that for sure. Wondering if its something i have enabled maybe.
I want to cut out a face leaving a hole. Then, I want to drag whats left and drop it over another face. I've tried using the pen tool but I cant seem to discard the face to leave the hole.
View 1 Replies View RelatedHere's something that should be simple, I want to create a template for cutting a square hole 125 mm on a side.
I have gone into Drawing Utilities and set the units to millimeters. I drew a square 125 units on a side.
In paper space, I selected a template that is 11" X 17". I set the scale to 1:1. I thought that that would give me a sheet I could print out ledger size with a 125mm square drawn on it, but no, it is not even close. As near as I can figure, the square is 125" on a side in paper space.
How can I build a 3d sphere shape with a rect hole in it (simil to pacman)? Something like this, but with a real 3d shape (so I could change the perspective having all the shades and lights etc...):
View 20 Replies View RelatedI am making a video in Nero Vision 10 and need to cut out the screen of a tv so that I can layer the TV over an image/video so it looks as though it is on the screen. I enclose a screenshot of the project. 'Transform-tools-crop' only cuts in straight lines so I wonder which device I should use which can cut out an odd bespoke shape? You can see in the uploaded image from the project how the image currently cannot fill the frame without covering it.
View 7 Replies View RelatedRefer to the attached file. How can I cut the RED part of the Wall 1 (W1) , where Wall 2 is sloped. I also want to cut a hole in wall 2 (W2) by the BLUE rectangle , but why I can't do that .
Â
I also want to add  a second floor to my project but I can only see the" Level" icon goes grey and I can't click it.
I've got a template with a set of Object defaults for an Inch drawing and a set for a Metric drawing. I've just noticed that within my metric set, if I insert a hole table with tapped holes, the font on the tapped holes doesn't match the other hole types. I'm searched around, but all the settings for the hole table style reference the same text style. (Please see the attached image.)
So is there a way to set a certain hole type to have a certain font or size within a hole table? Because if there is, I'd obviously like to remove it..... But I can't seem to figure out where the issue is.
I am trying to add a hole to an existing hole chart. I drop the part into a new drawing, set the ordinate "zero", and add a hole chart by selecting a few holes. When I attempt to edit the chart: click chart, right click "edit", click add hole, select new holes, right click to create, the "create" selection is greyed out and all I have to choose from is cancel. I searched the forum here but could not find a reference to this a know issue. Am I doing something wrong or is this a glitch of 2013.Â
We are running win7 x64 machines and this happens on both the 2013 Ultimate and Premium editions of the product.
I have had this problem intermittently for a few weeks since going to Inventor 2013 SP1.1. I have a part within an assembly and that part has holes created in it before assembling it with other parts. Now when I try and create a hole table in a drawing of the assembly I cannot select hole edges and the hole table is blank when trying to create it automatically from view selection. I originally thought it may be an alignment issue but I have since aligned everything correctly and it still persists. I can create the hole table if I import in just the part into the drawing but it will not allow me to create the table on the whole assembly.Â
I can also create the hole table if I use "centred pattern" and create cross hairs on all of the holes however it does not give me correct annotations for the holes as shown in attachment and I can manually change the annotations but seriously this should not be required. As shown in the screen shot it reads as A1 down to K1 instead of A1 to A10. .
Question: Is it possible to control the Hole Dimensions called out on the Hole Chart? As in controling leading/trailing zeros for main hole dim, alt home dim and tolerances? Can you combine the Main Dim with the Alt dim in a single column, separated with parentheses? (same with tolerance?)
View 5 Replies View RelatedI would like to use the hole command to place a hole in a part. When I place the hole it won't allow me to use one of the origin planes to locate the hole from. Can I only locate holes off edges?
View 4 Replies View RelatedI have an assembly that contains a part and a hole feature (the hole feature is at the assembly level). Using the api, I'm trying to get the hole location relative to the part's coordinate system in a without using the holeplacementdefinition.distance property, this way I can get the hole location regardless of the way it was defined.
View 2 Replies View RelatedI have downloaded an eps file, which I need to cut. I use a graphtec ce5000-60 cutter, and a plugin called cutting master 2 in order to use coreldraw.
when i select application launcher and choose cut / plot, it opens cutting master. when i do this, it only shows the 2 outer lines of the logo i need to cut. I have attached a screenshot so you can see exactly what I mean. I have tried lots of things to recitfy this, but as a complete beginner with this software, I really dont have a clue.Â
i use hole feature names in hole table.
i assign hole names attribute to hole feature but dont get attribute hole table.
how to get hole names in hole table.
While creating holes in a part, a small counter shows (when you click on a point) of how many holes there are.
Programs:
Solidworks (1998-2011)
Autodesk Inventor (R8 - 2013)
Autodesk AutoCad 2D
Autodesk AutoCad 3D
Catia V5
SolidEdge
Anvil (Very old program!)
Pro/E
Is there a way to cut a solid into two pieces using a non-planar cutting plane? I have been tasked with calculating the volume of concrete damage in a chute block. I have a sketch of the damage on the chute block. I created the chute block as a solid and then drew the damaged area extents using plines. This created non-planar plines. Is there a way to get this to work that will allow me to see the volume of the concrete damage? I need an easy way to do this, there are 50 chute blocks all the same size but with varying degrees of damage
View 1 Replies View RelatedI have 4 layers (background, layer1, layer2, layer3-text). They fill all 300 x 600 pixels that comprise the .psd/future image. What I want to do is use a rounded rectangle to encompass all of the other layers, so that the surrounding pixels (around the rounded rectangle) are transparent.
I want all of my current layers to be the content of a rounded rectangle.
I saw that the Rounded Rectangle properties were not available on the regular rectangle (to change corner radius).
View 5 Replies View RelatedAny quick tips to convert an expanded appearance rounded rectacngle back to a sharp cornered rectangle?
View 6 Replies View RelatedI made a design last night that included me cutting out a model from one of my photoshoots, so I did that... and then after all was said and done, I'm thinking she looks a little choppy and "dropped" into the photo. is there some way to make her look a little more smooth?
I got most of the edges cleaned up and used a feather, and even burned around the edges a tad to make it blend but it still looks very cut out.
want to create an effect where I have a piece of paper and I want to burn a hole through the middle. and like have the edges curling up or something with the flame coming out of the middle.
View 1 Replies View RelatedI use Photoshop 8.1I have to make 100 pictures of some car antenna cables. When I have those pictures, I need to cut them out.I think in english it is called crop. (I have dutch versionATM I am doing every picture manually as the are all different. IS there a macro or plugin that cuts out the pictures itself or even help out with it alot ?Getting a bit fedup with setting all the achor points and straighten the lines.
View 8 Replies View RelatedI have created a new document consisting of just 2 layers.
The bottom layer is transparent and the top layer is filled with red.
What I want to do is cut out a rectangle from the top layer revealing the transparent layer underneath.
I have read somewhere that i should use the regular lasso to cut images, but that is a a lot of work if i have an big image.
So i was thinking if someone have any tip or in another way , maybe someone wanna cut the image out for me i am a bit shaky on my hand when i use the lasso-tool so its hard to get it good even if i zoom, and besides that ,is the cut-job ,well its important,
but its a thing that i wanna get over as soon as possible so i can start being creative ill post the image i will work with (its only the shape i want) it will be bigger in reality but i had to take a smaller pic of it to get it posted :
I raise chinchillas and would like to cut out some images and just change the background on others. Being that it is a fur animal (samples below) and it has all different lengths and curves....how would I do this? I'm new to photoshop other than playing with curves and stuff to make them nicer photography.
View 7 Replies View RelatedI'm creating a games website and therefore need a lot of images. However, I was just wandering was there a good way of cutting? Should I just use the lasso tools?
View 2 Replies View RelatedI am trying to take out an area of a photo. I have it selected. I want that area deleted and replaced with something similar to it's surroundings.
I have a picture of a barn... there is a large white post that I don't want there. The post is surrounded by flowers. I'd like it to look like a big patch of flowers with no post.
quickly cut around people, objects are ok with the "refine edge tool" but people, particulary the hair is hard to do..
View 18 Replies View RelatedIm trying to switch from Fireworks to Phosotshop. In FW you can draw two shapes and with both selected punch, unify, etc the two shapes. Could some one help me along on how to do the same thing in PS?
One more question. Is it possible to align a selected item to the stage rather than to another object? Fireworks can align objects center of the stage or left, right, top, etc.
I am trying to make a logo in black and white where the letters of the text have the opposite color of the background.
there are three major elements in the logo
background (white)
KN (big letters in black)
kyushu and network (small letters that have to be in opposite color )
can anyone help me with this ?
cutting out an image without using that tool where u have to cut out the picture in a squre form but i want to make it so i can cut out JUST the picture and I can add text behind the picture.
View 2 Replies View Related