CorelDRAW Graphics Suite X5 :: Cutting All Components Of Image Using Cutting Master 2 Plugin
Aug 1, 2011
I have downloaded an eps file, which I need to cut. I use a graphtec ce5000-60 cutter, and a plugin called cutting master 2 in order to use coreldraw.
when i select application launcher and choose cut / plot, it opens cutting master. when i do this, it only shows the 2 outer lines of the logo i need to cut. I have attached a screenshot so you can see exactly what I mean. I have tried lots of things to recitfy this, but as a complete beginner with this software, I really dont have a clue.
View 8 Replies
ADVERTISEMENT
Nov 26, 2011
I just recently purchased a new computer and installed all my software. When I'm in corel draw and click on the icon to send to my plotter/cutter, the cutting Master 2 plug-in opens behind corel draw. It always opened in front of my corel screen on my older pc. how to get it to open in front of corel?
View 2 Replies
View Related
Dec 3, 2013
I have a problem with cutting the design, it actually prints it but not cut it. The error displays : Cut Data File Creation Error..
I'm using Corel Draw Graphics Suite X6, Raster Link, to print & cut using Mimaki CJV30-60..
What does the error actually mean & what do I need to do to resolve this?
View 2 Replies
View Related
Nov 26, 2011
Im trying to cut out the centre of the letter R below. Normally I break curve apart, select the centre, and trim it from the outer. I can then select the centre piece and remove it. As you can see, this has worked with the letters P & O. When I do it with the R it seems to have worked, to the point where I can even select the centre and remove it, but when I put it back over a coloured background, it is still white.
View 8 Replies
View Related
May 5, 2011
I have a design that I would like to cut in half so that I can cut half of it at at time on my vinyl cutter. I can't think of way to do it in Corel.
View 5 Replies
View Related
May 12, 2011
A customer sent me a jpeg of a white dove that they want printed on vinyl and then contour cut to put on their travel trailer. The picture was a very low dpi and I scanned it and increased the dpi to 150. I tried to trace it, but it just would not come out right.
My question is -- Can I put cutting lines around the dove as a bitmap and then be able to print and contour cut it out?
View 1 Replies
View Related
Aug 1, 2011
Im new to both coreldraw, and to the graphtec cutter, so my problem may have a very simple answer. Ive been playing around with it, learning how things work. Smaller images are no problem, but Im having trouble cutting larger images.
the plotter can cut up to a width of 610mm, and Im using 610mm vinyl. I need to cut some items that are 600mm wide. First time I tried, it left a gap on the left side of approx 50mm. It also stopped cutting approximately 20mm from the right side. next time, I loaded the vinyl into the machine 45mm further right and tried again. this time the left hand edge was positioned where I expected, but the right side still stopped in the same place as previously, leaving a gap of around 70mm on the right hand side. you would think I was trying to cut something bigger than the capacity of the cutter, but obviously this isnt the case.
if I have missed any necessary information etc, Im very new to all of this.
View 7 Replies
View Related
Mar 18, 2012
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
View 7 Replies
View Related
Jul 4, 2011
I have a Roland SP54 with VersaWorks.
I design everything in CorelDraw and want to know how one goes about doing a color separation for cutting just the vinyl,
E.g. I have a 3 color design that I need to cut 3 different color sheets of vinyl. How do I go about setting up to cut?
View 10 Replies
View Related
Sep 20, 2011
Have recently upgraded to corel 11, from 9, but at the same time upgraded my computer.
When I try to plot a simple circle shape on my Roland CM24 the image cuts twice and is extremely slow (juddering).
I believe the double cut is caused by the hairline & fill but messing around have only gone from double cutting each shape individually to do double cutting the whole image.
View 2 Replies
View Related
Dec 2, 2007
Using Corel to prepare images for cutting on a CNC plasma table. any easiest way to prepare images for cutting. With merging images, Lettering and original art work transfer. I need to convert to a DXF format to drop into the machine program (Sheetcam). I have used trace with some success. By this, I mean that the image "looked" good, but I seem to be doing something wrong because the graphic will not run on the machine.
View 3 Replies
View Related
Jul 15, 2010
When I step & repeat the crop marks are not there. How I get the crop marks for cutting multi up items.
View 5 Replies
View Related
Aug 3, 2011
Using CD x4.I cut directly from Corel. I was trying to do a simple 2 color vinyl job. I put reg marks but they are only on one layer. I tried copying but they weren't in the same place as the other layer.
Is there a way to get the Reg Marks to appear on all layers properly ?
View 5 Replies
View Related
Jul 2, 2011
Is there a way to change the outline color around a large group of images all at once?
I am trying to create an outline color for contour cutting and I have the outline color in my spot colors but now I was wondering if I could apply these change to all the images at once instead of changing each one.
View 2 Replies
View Related
Jun 19, 2012
when i cut vectors letters and numbers, its cuts but at every character it does not seem to completely fill the edges. so i always have to use my small nt cutter to do that.
i read the manuals, changed the offset, reduced the cut speed, increased the pressure and even convert to curves before i cut but the problem does not go away. the company where i bought it from is not very useful.
maybe because the machine is chinese i have a creation pcut ct630 vinyl cutter.also in coreldraw, i always use "harline" when cutitng anything is it correct?
Creation pcut ct 630 vinyl cutter
View 5 Replies
View Related
Aug 2, 2012
Is there a way to cut a solid into two pieces using a non-planar cutting plane? I have been tasked with calculating the volume of concrete damage in a chute block. I have a sketch of the damage on the chute block. I created the chute block as a solid and then drew the damaged area extents using plines. This created non-planar plines. Is there a way to get this to work that will allow me to see the volume of the concrete damage? I need an easy way to do this, there are 50 chute blocks all the same size but with varying degrees of damage
View 1 Replies
View Related
Nov 4, 2013
The Cut Plane in a Plan View doesn't really represent the cut component but instead some kind of projection.In my case, I use a lot of Face Based Windows and Doors since my walls are often slanted. The Plan View representation of these components doesn't look right. A workaround is placing these components in a Component/Model in Place environment.
View 3 Replies
View Related
May 13, 2011
Im working on 4 pages and i want to keep the page sizes different on all 4 of them but whenever i change the pages size on 1 page then all the other pages also follow the 1st page.
i went to object manager but i don't know what i should do to stop it.
View 10 Replies
View Related
Apr 21, 2012
I'm working on a book that has watermark on all pages and jpegs too of a4 size. Working in earlier version [x5], I used to overlap all the watermarks which was located in master layer. When I used to import a fresh jpeg on new pages, the watermark went below the jpegs. What i used to do was create a new master layer and then cut pasted the watermark in that layer, and the watermark came above the jpegs in the pages that were added later. In CorelDRAW x6 this i'm not able to do.
The watermark remains bottom of the jpeg, no matter what i do. if i edit the same file in version X5, it works fine and then i get it into x6 and do rest of stuff it works fine. The watermark problem still exists.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
View 5 Replies
View Related
Feb 25, 2011
How to get a background, the same on every page of a booklet, with bleed for printing? Using Page Layout/Background will only size to the page, no bleed. There must be a way to have a Master Layer as a static background (with bleed) but when I try it always sits on top of every page & I cannot bring the page text to the front.
View 15 Replies
View Related
Oct 4, 2012
I wonder if there's any way to make a page without the layout of the master page layer? I have made a frame, page number and small stuff that will go on every pages. But I want to make first and last page of the document a little different so I want that the master layer will be ignored for these pages.
View 1 Replies
View Related
Sep 6, 2012
X4 user here that upgraded to X6 a few weeks ago. One thing that's blowing my gord is having my dimensions "lock" to guidelines and/or objects -- My dimensions aren't locked in the classic sense, i understand how to lock a dimension in corel. What i mean every time i create a dimension with master guides, and then try to move my guides, my dimension moves with it.
The worst of it is that i'm mostly getting them linked to master guidelines, so when i create a new page, say page 2, and want to move a master guide, i go back to page 1, and it has messed up all my dimensions.
And no, i do not want to break my dimension apart, I need it to stay as a working dimension!
View 13 Replies
View Related
Apr 9, 2012
Is there any way I can choose some Master layers to be present on selective pages only? For example in a 50 page document I have a master layer having a square and a rectangle. Now this should be available on pages say 1-10, 11-23. The rest of the pages should not have them.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
View 4 Replies
View Related
Apr 6, 2012
I am trying to edit the Master Page in Corel Draw X4. However I can't find how to list it in the obect manager. The first image shows the Object Manager as I see it.
The second image shows an example of the Object Manager as people have posted in other discussion topics.
How do I list all pages within the Object Manager as shown in this second example, and have the + and - buttons to expand the selection ?
View 6 Replies
View Related
Sep 21, 2012
We can make multi master pages for ODD and EVEN pages.
View 1 Replies
View Related
Jun 12, 2007
What is the fastest way to take a directory of individual corel files
page1.cdr
page2.cdr
page3.cdr
...
page 50.cdr
page 51.cdr
page52.cdr
and combine them into one single 52 page coreldraw file for printing/imposition.
Color Printing Forum : Print Directory
View 11 Replies
View Related
Apr 19, 2013
I am new to CorelDraw and I have got an issue which might be potentially linked with master page / dynamic text or macros. I have got a multipage template with some text repetition on each page. Unfortunately those text have to be in different position and using different fonts.So setting up master page is not really solution, unless it can be done as above.
View 2 Replies
View Related
Jun 13, 2013
Any way to turn an object that has been used as a master (parent object) or its resulting clone back into a normal object?
View 10 Replies
View Related
Jul 11, 2013
I still have my X5 KPT collection and want to install it into X6
View 1 Replies
View Related
Jun 9, 2012
How to maybe trace the contour of one object (font) to close the lines of another object to allow it to process in Cut Studio for a Roland GX-24? Basically there's a volleyball and on a corner of the ball the font will overlap but because there are so many intersecting lines, having the cutter make the cuts would be impossible.
I did "contour" the font but the lines inside the volleyball image are not "closed" and I want it to follow the text shape to ensure uniformity instead of me trying to close every node manually.
View 2 Replies
View Related
Sep 29, 2011
Screenshot PDF Problem.jpg
When I publish something to PDF (in order to send it to a professional presser) the cutting lines are set on the 'bleed edge' instead of excluding the neccesary bleed margin of 3mm. In other words I am not able to provide any PDF document with a bleed margin which is (obviously) very frustrating for the pressing company as well as for me.
- In Publish to PDF > Settings > Pre-press I checked the cutting-line box ( I work with a dutch version so excuse me if the the right translations aren't used. Check attached file for the settings).
- When I check the box 'Aflopen' (just above the cutting line box) the PDF file turns out white.
View 14 Replies
View Related