CorelDRAW Graphics Suite X4 :: How To Get Crop Marks For Cutting Multi Items
Jul 15, 2010When I step & repeat the crop marks are not there. How I get the crop marks for cutting multi up items.
View 5 Replies
ADVERTISEMENT
CorelDRAW Graphics Suite X4 :: Registration Marks On All Layers For Vinyl Cutting
Aug 3, 2011Using CD x4.I cut directly from Corel. I was trying to do a simple 2 color vinyl job. I put reg marks but they are only on one layer. I tried copying but they weren't in the same place as the other layer.
Is there a way to get the Reg Marks to appear on all layers properly ?
CorelDRAW Graphics Suite X5 :: Cutting All Components Of Image Using Cutting Master 2 Plugin
Aug 1, 2011I have downloaded an eps file, which I need to cut. I use a graphtec ce5000-60 cutter, and a plugin called cutting master 2 in order to use coreldraw.
when i select application launcher and choose cut / plot, it opens cutting master. when i do this, it only shows the 2 outer lines of the logo i need to cut. I have attached a screenshot so you can see exactly what I mean. I have tried lots of things to recitfy this, but as a complete beginner with this software, I really dont have a clue.
CorelDRAW Graphics Suite X5 :: Unwanted Selection Marks
Mar 23, 2011Is it possible to turn off the selection marks which appear after each drawing stroke when drawing in a freehand style with a wacom pen?
I find it very off-putting to my drawing. In Illustrator and Inkscape it is possible to draw freely without constant selection marks appearing after every stroke of the pen.
CorelDRAW Graphics Suite X3 :: Export Text Or Graphics As EPS Files - Vinyl Cutting?
Mar 18, 2012why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
CorelDRAW Graphics Suite X4 :: Macro To Place Registration Marks?
Sep 14, 2011We have certain registration marks that we use on our designs before we print to vellum. How to be able to write a macro that could do the following? I've attached an example image of where we place the registration marks and am also attaching the actual registration mark CDR file. I'm assuming this would probably be rather simple...
We'd like this registration mark to be centered to the image and placed on the top and bottom of the image at .25 inches away from the image itself. So, I would think the macro would have to select the entire image on the page, then decide where .25 inches is away from the top and bottom of the image and place the registration mark, centered in that area.
CorelDRAW Graphics Suite 12 :: Bleed Marks And Design Area
Apr 11, 2013I am so confused with bleed marks for printers. Here is my example.
I am designing a postcard that is 8.5 x 3.66. I set my page size in the layout section to 8.5 x 3.66. In that layout section it also has a bleed button. I check it and type in .125 in. (what the printer requires.
So it adds a dotted line outside . which i understand. Here is my question. When I save as PDF, only the 8.5x3.66 saves and not the bleed area. I need the printer to see the bleed area. They also want crop marks.
CorelDRAW Graphics Suite X6 :: Removing Graph / Hatch Marks When Printing
Jun 4, 2012I am having a problem when printing out an item. when i first started there was no background graph looking stuff, its very light but i am afraid that it will do something that i don't want when i go to burn a screen, did something get changed in my program, there was another person using it recently, and now i am getting the background,
View 6 Replies View RelatedCorelDRAW Graphics Suite 12 :: Setting Margins And Putting In Printer Marks
Sep 16, 2013I am new to Corel 12, I am a little behind the times. I need setting up my margins and putting in my printer marks.
View 1 Replies View RelatedCorelDRAW Graphics Suite X6 :: Error In Cutting Design
Dec 3, 2013I have a problem with cutting the design, it actually prints it but not cut it. The error displays : Cut Data File Creation Error..
I'm using Corel Draw Graphics Suite X6, Raster Link, to print & cut using Mimaki CJV30-60..
What does the error actually mean & what do I need to do to resolve this?
CorelDRAW Graphics Suite X5 :: Cutting Out Center Of Object
Nov 26, 2011Im trying to cut out the centre of the letter R below. Normally I break curve apart, select the centre, and trim it from the outer. I can then select the centre piece and remove it. As you can see, this has worked with the letters P & O. When I do it with the R it seems to have worked, to the point where I can even select the centre and remove it, but when I put it back over a coloured background, it is still white.
View 8 Replies View RelatedCorelDRAW Graphics Suite X4 :: Cutting Design In Half
May 5, 2011I have a design that I would like to cut in half so that I can cut half of it at at time on my vinyl cutter. I can't think of way to do it in Corel.
View 5 Replies View RelatedCorelDRAW Graphics Suite X4 :: Cutting Lines For JPEG
May 12, 2011A customer sent me a jpeg of a white dove that they want printed on vinyl and then contour cut to put on their travel trailer. The picture was a very low dpi and I scanned it and increased the dpi to 150. I tried to trace it, but it just would not come out right.
My question is -- Can I put cutting lines around the dove as a bitmap and then be able to print and contour cut it out?
CorelDRAW Graphics Suite X4 :: Cutting Master 2 Opens Behind It?
Nov 26, 2011I just recently purchased a new computer and installed all my software. When I'm in corel draw and click on the icon to send to my plotter/cutter, the cutting Master 2 plug-in opens behind corel draw. It always opened in front of my corel screen on my older pc. how to get it to open in front of corel?
View 2 Replies View RelatedCorelDRAW Graphics Suite X5 :: Cutting Large Images
Aug 1, 2011Im new to both coreldraw, and to the graphtec cutter, so my problem may have a very simple answer. Ive been playing around with it, learning how things work. Smaller images are no problem, but Im having trouble cutting larger images.
the plotter can cut up to a width of 610mm, and Im using 610mm vinyl. I need to cut some items that are 600mm wide. First time I tried, it left a gap on the left side of approx 50mm. It also stopped cutting approximately 20mm from the right side. next time, I loaded the vinyl into the machine 45mm further right and tried again. this time the left hand edge was positioned where I expected, but the right side still stopped in the same place as previously, leaving a gap of around 70mm on the right hand side. you would think I was trying to cut something bigger than the capacity of the cutter, but obviously this isnt the case.
if I have missed any necessary information etc, Im very new to all of this.
CorelDRAW Graphics Suite X5 :: Removing One Of Three Items
Jul 25, 2011I'm running out of time. I ungrouped a set of three images. How do I take only one of the images out? When I try to take one out, all three images come out? I am doing this for a nonprofit organization and it needs to be done today. Did I ungroup them incorrectly or can you not remove only one image?
View 3 Replies View RelatedCorelDRAW Graphics Suite 12 :: Color Separations For Vinyl Cutting
Jul 4, 2011I have a Roland SP54 with VersaWorks.
I design everything in CorelDraw and want to know how one goes about doing a color separation for cutting just the vinyl,
E.g. I have a 3 color design that I need to cut 3 different color sheets of vinyl. How do I go about setting up to cut?
CorelDRAW Graphics Suite 11 :: Double Cutting And Slow Running?
Sep 20, 2011Have recently upgraded to corel 11, from 9, but at the same time upgraded my computer.
When I try to plot a simple circle shape on my Roland CM24 the image cuts twice and is extremely slow (juddering).
I believe the double cut is caused by the hairline & fill but messing around have only gone from double cutting each shape individually to do double cutting the whole image.
CorelDRAW Graphics Suite X3 :: Preparing Images For Plasma Cutting Metal Art?
Dec 2, 2007Using Corel to prepare images for cutting on a CNC plasma table. any easiest way to prepare images for cutting. With merging images, Lettering and original art work transfer. I need to convert to a DXF format to drop into the machine program (Sheetcam). I have used trace with some success. By this, I mean that the image "looked" good, but I seem to be doing something wrong because the graphic will not run on the machine.
View 3 Replies View RelatedCorelDRAW Graphics Suite 12 :: Creating Outline Color For Contour Cutting?
Jul 2, 2011Is there a way to change the outline color around a large group of images all at once?
I am trying to create an outline color for contour cutting and I have the outline color in my spot colors but now I was wondering if I could apply these change to all the images at once instead of changing each one.
CorelDRAW Graphics Suite X5 :: Vinyl Cutter Cannot Close Edges When Cutting
Jun 19, 2012when i cut vectors letters and numbers, its cuts but at every character it does not seem to completely fill the edges. so i always have to use my small nt cutter to do that.
i read the manuals, changed the offset, reduced the cut speed, increased the pressure and even convert to curves before i cut but the problem does not go away. the company where i bought it from is not very useful.
maybe because the machine is chinese i have a creation pcut ct630 vinyl cutter.also in coreldraw, i always use "harline" when cutitng anything is it correct?
Creation pcut ct 630 vinyl cutter
CorelDRAW Graphics Suite X6 :: Macro Manager - Order Of Items
Apr 15, 2012What determines the order of items shown in the Macro Manager? Is there anyway to have the modules show up in alphabetical order?
View 5 Replies View RelatedCorelDRAW Graphics Suite X5 :: Items Selection With Black Handles
Dec 6, 2011New to Corel, I find selecting items kinda frustrating with the black handles, which can be difficult to distinguish with objects close in size or proximity. Is there a way of making a selection change color when selected as Cad programs do ?
View 1 Replies View RelatedCorelDRAW Graphics Suite X4 :: Multi Page Export To JPG Macro Adjustment
Jun 27, 2011I'm using the macro that's on this page.
[URL]......
If this can be modified to not save the file name as it does now...like this
44649.cdr1.JPG
We need it to save it like
44649-1.jpg
44649-2.jpg
44649-3.jpg
CorelDRAW Graphics Suite X6 :: Copy / Paste From And To Multi-column Text Box?
Apr 5, 2013I have a problem in trying to copy text from an existing multi column text box and pasting it into another existing text box. It just doesn't work. If I copy text from a single column text box into another text box, single or multi column, it does work.
The only was to copy text from a multi column text box is to use paste special which then creates a completely new single column text box and pastes the text there. I loose all the formatting.
I can then copy the text from the text box created by that paste special process and then copy that to where I want it to go, but of course I then have to reset all the formatting.
I'm using the latest version of Corel Draw X6 -this probem however seems to have been introduced in X6 as I've just open X5 on my system and the copy/paste functon works as it shoud.
CorelDRAW Graphics Suite X6 :: Make Multi Master Pages For ODD And EVEN Page?
Sep 21, 2012We can make multi master pages for ODD and EVEN pages.
View 1 Replies View RelatedCorelDRAW Graphics Suite X6 :: Items In Contents Folder Be Opened Directly Into Photoshop CS6
Feb 5, 2013Can the items in the Contents Folder (e.g. Frames, pictures, etc.) be opened directly into Photoshop CS6 without first being opened in CorelDRAW X6. I have both programs, and it would be great if I had access to those objects whenever I'm using Photoshop.
View 3 Replies View RelatedCorelDRAW Graphics Suite X6 :: Grid Turns On Imported Multi-page PDF Files
Sep 30, 2013When importing a multi-page pdf or ps file into a multi-page document, sometimes the inserted pages will all have their Document Grid layer visibility turned on, even when the existing pages in the document all have it turned off.
If I bring up the object manager, I can go through the affected pages and 'un-eye' them one page at a time. But it's a blooming nuisance, especially when importing dozens of pages at once.
CorelDRAW Graphics Suite X5 :: Create Multi-layered Airbrush Stencil From Photo Of Pin-up?
Oct 5, 2011Im wanting to create a multi-layered airbrush stencil from a photo of a pin-up. How do I do this?
View 1 Replies View RelatedCorelDRAW Graphics Suite 12 :: Crop Oval Out Of Image?
Mar 28, 2012i have an image on my workspace. its a rectangular image. Now, I want to crop an oval out of it. So everything else around it will dissapear. How do i do this? I was thinking the CUT tool, but that only cuts from point to point.
View 3 Replies View RelatedCorelDRAW Graphics Suite X5 :: PowerClip Crop Crash
Nov 15, 2011Problem as we have with CD X5 when trying to crop a PowerClip Object with another object?
When we try to crop a PowerClip object with a rectangle or any other shape X5 just crashes.