Using CD x4.I cut directly from Corel. I was trying to do a simple 2 color vinyl job. I put reg marks but they are only on one layer. I tried copying but they weren't in the same place as the other layer.
Is there a way to get the Reg Marks to appear on all layers properly ?
I'm starting some designs to be cut out of vinyl and wanted to put registration marks on the drawing so I can line different cuts up. How these work. How do I put registration marks in?
View 3 Replies View RelatedWe have certain registration marks that we use on our designs before we print to vellum. How to be able to write a macro that could do the following? I've attached an example image of where we place the registration marks and am also attaching the actual registration mark CDR file. I'm assuming this would probably be rather simple...
We'd like this registration mark to be centered to the image and placed on the top and bottom of the image at .25 inches away from the image itself. So, I would think the macro would have to select the entire image on the page, then decide where .25 inches is away from the top and bottom of the image and place the registration mark, centered in that area.
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
I have a Roland SP54 with VersaWorks.
I design everything in CorelDraw and want to know how one goes about doing a color separation for cutting just the vinyl,
E.g. I have a 3 color design that I need to cut 3 different color sheets of vinyl. How do I go about setting up to cut?
when i cut vectors letters and numbers, its cuts but at every character it does not seem to completely fill the edges. so i always have to use my small nt cutter to do that.
i read the manuals, changed the offset, reduced the cut speed, increased the pressure and even convert to curves before i cut but the problem does not go away. the company where i bought it from is not very useful.
maybe because the machine is chinese i have a creation pcut ct630 vinyl cutter.also in coreldraw, i always use "harline" when cutitng anything is it correct?
Creation pcut ct 630 vinyl cutter
When I step & repeat the crop marks are not there. How I get the crop marks for cutting multi up items.
View 5 Replies View RelatedI have downloaded an eps file, which I need to cut. I use a graphtec ce5000-60 cutter, and a plugin called cutting master 2 in order to use coreldraw.
when i select application launcher and choose cut / plot, it opens cutting master. when i do this, it only shows the 2 outer lines of the logo i need to cut. I have attached a screenshot so you can see exactly what I mean. I have tried lots of things to recitfy this, but as a complete beginner with this software, I really dont have a clue.
I installed Corel Draw 12 on a new machine with Vista HP, and I cannot git rid of the registration nag screen. I lost my registration info a long time ago, and have tried the "never register" option, but the nag screen keeps coming up.
View 3 Replies View RelatedSince today, I get the error mentioned in the subject when trying to open Corel Draw X5 (part of Suite X5). Running on WinXP. No previous problems. But I do think that it recently installed an automatic update.
I tried Repair (via Control Panel), but it did not work.
How or were to find the crop mark / registration mark tools in x6.
View 5 Replies View RelatedIs it possible to turn off the selection marks which appear after each drawing stroke when drawing in a freehand style with a wacom pen?
I find it very off-putting to my drawing. In Illustrator and Inkscape it is possible to draw freely without constant selection marks appearing after every stroke of the pen.
I am so confused with bleed marks for printers. Here is my example.
I am designing a postcard that is 8.5 x 3.66. I set my page size in the layout section to 8.5 x 3.66. In that layout section it also has a bleed button. I check it and type in .125 in. (what the printer requires.
So it adds a dotted line outside . which i understand. Here is my question. When I save as PDF, only the 8.5x3.66 saves and not the bleed area. I need the printer to see the bleed area. They also want crop marks.
0
false
18 pt
18 pt
0
0
false
false
false
I have a Toshiba laptop with Windows 7. It has a 500GB HD, 4GB RAM, 16" screen and CorelDRAW X5 and Summa's WinPlot bridge software installed. Everything runs perfectly.
I want to be able to cut vinyl letters from my Summa D75R vinyl cutter and then to cut a different colored outline to be applied over the top of those letters. The letters themselves, that is, the main body of the letters, I can cut with no problem.
I know that I will have to separate the two elements and cut the letters from one file and the outlines from a different file. As an experiment I created a single word with a color. I then created an outline for that word. I deleted the body of the letter leaving only the outline.
I then did a "Convert to Curves" on the outline and imported the image into the WinPlot software that my Summa D75R vinyl cutter uses. I sent the image to the cutter but it cut it as a solid letter. It did not make a double-line cut as it would have to do to make the image an outline.
I am having a problem when printing out an item. when i first started there was no background graph looking stuff, its very light but i am afraid that it will do something that i don't want when i go to burn a screen, did something get changed in my program, there was another person using it recently, and now i am getting the background,
View 6 Replies View RelatedI am new to Corel 12, I am a little behind the times. I need setting up my margins and putting in my printer marks.
View 1 Replies View RelatedI have a problem with cutting the design, it actually prints it but not cut it. The error displays : Cut Data File Creation Error..
I'm using Corel Draw Graphics Suite X6, Raster Link, to print & cut using Mimaki CJV30-60..
What does the error actually mean & what do I need to do to resolve this?
Im trying to cut out the centre of the letter R below. Normally I break curve apart, select the centre, and trim it from the outer. I can then select the centre piece and remove it. As you can see, this has worked with the letters P & O. When I do it with the R it seems to have worked, to the point where I can even select the centre and remove it, but when I put it back over a coloured background, it is still white.
View 8 Replies View RelatedI have a design that I would like to cut in half so that I can cut half of it at at time on my vinyl cutter. I can't think of way to do it in Corel.
View 5 Replies View RelatedA customer sent me a jpeg of a white dove that they want printed on vinyl and then contour cut to put on their travel trailer. The picture was a very low dpi and I scanned it and increased the dpi to 150. I tried to trace it, but it just would not come out right.
My question is -- Can I put cutting lines around the dove as a bitmap and then be able to print and contour cut it out?
I just recently purchased a new computer and installed all my software. When I'm in corel draw and click on the icon to send to my plotter/cutter, the cutting Master 2 plug-in opens behind corel draw. It always opened in front of my corel screen on my older pc. how to get it to open in front of corel?
View 2 Replies View RelatedIm new to both coreldraw, and to the graphtec cutter, so my problem may have a very simple answer. Ive been playing around with it, learning how things work. Smaller images are no problem, but Im having trouble cutting larger images.
the plotter can cut up to a width of 610mm, and Im using 610mm vinyl. I need to cut some items that are 600mm wide. First time I tried, it left a gap on the left side of approx 50mm. It also stopped cutting approximately 20mm from the right side. next time, I loaded the vinyl into the machine 45mm further right and tried again. this time the left hand edge was positioned where I expected, but the right side still stopped in the same place as previously, leaving a gap of around 70mm on the right hand side. you would think I was trying to cut something bigger than the capacity of the cutter, but obviously this isnt the case.
if I have missed any necessary information etc, Im very new to all of this.
Have recently upgraded to corel 11, from 9, but at the same time upgraded my computer.
When I try to plot a simple circle shape on my Roland CM24 the image cuts twice and is extremely slow (juddering).
I believe the double cut is caused by the hairline & fill but messing around have only gone from double cutting each shape individually to do double cutting the whole image.
Using Corel to prepare images for cutting on a CNC plasma table. any easiest way to prepare images for cutting. With merging images, Lettering and original art work transfer. I need to convert to a DXF format to drop into the machine program (Sheetcam). I have used trace with some success. By this, I mean that the image "looked" good, but I seem to be doing something wrong because the graphic will not run on the machine.
View 3 Replies View RelatedIs there a way to change the outline color around a large group of images all at once?
I am trying to create an outline color for contour cutting and I have the outline color in my spot colors but now I was wondering if I could apply these change to all the images at once instead of changing each one.
I am using X5 and print on a Cannon wide format inkjet printer. I use RGB colors, but I'm having a problem printing on adhesive vinyl. I used R255 G0 B0 that I've used on other medias, but it came out a little orange. I really need a good red to use with my settings.
View 1 Replies View RelatedI am starting a small screen printing business and need help with registration marks. I have adobe photoshop 6.0. Now I know you have to scoll down to print option and then from there you can check a box that says registration marks but they dont work, nothing appears. I have used them before about a year ago so I know how to get them on. They just wont work now...
View 1 Replies View RelatedI recently purchased Coreldraw Home and Student Suite from my local computer store, on there advice that this would work with a vinyl plotter.
I have since installed the software and it has not worked as it is not compatible with vinyl plotters.
We are using corel x6 how can you flatten layers we are having print issues. We have a new plotter and does not recognize layers in corel and prints all black. We use many scans in our work. If we combine layers would it pile all scans on top of one another .
View 5 Replies View RelatedI've seen PDF files with layers (the same as it comes in Corel Draw - you can hide or show something etc.). Probably they were created with AutoCAD.
Is it possible to export/save CorelDraw file to such PDF with layers? For example, if I got 3 layers in my CDR then I'd like to have them in my PDF.
I tried option PUBLISH TO PDF but I didn't find (or I wasn't careful enough) any option to do this.
so, for some reason when i choose the body of this cow i drew to fill, it fills its hind leg, and stubbornly refuses to fill the body at all. i have tried all the fill tools to get this too work. i figure if i flatten the image the fill tool will work a bit better.
there is no such thing as flattening the image or merging layers in the help section and the info online hasn't been so great. How do you merge layers?