I recently purchased Coreldraw Home and Student Suite from my local computer store, on there advice that this would work with a vinyl plotter.
I have since installed the software and it has not worked as it is not compatible with vinyl plotters.
New purchase of X5 Home & Student.
PC - Dual core with 2Gb RAM 300Gb disc space running MS XP Sp3 (ALL Latest updates installed), latest NVidia drivers installed. I have looked at all previous inputs on this problem and carried out installation with Anti-Virus disabled, FIREWALL disabled, disconnected from network etc etc.
On attempting to start any of the package applications the software fails with an A.R.M. error.
Under the Tools~option box there is no field to set the duplicate offset distance as stated in the help. Where can I set this.
View 5 Replies View RelatedI am trying to set up numbers to be able to cut on a vinyl plotter. I have created the numbers and put a stroke on them.
How could i be able to cut them when sent to the vinyl plotter.
This image shows the points that have the outline. I need to have these points moved to the outer edge.
I am using X5 and print on a Cannon wide format inkjet printer. I use RGB colors, but I'm having a problem printing on adhesive vinyl. I used R255 G0 B0 that I've used on other medias, but it came out a little orange. I really need a good red to use with my settings.
View 1 Replies View RelatedI have a Roland SP54 with VersaWorks.
I design everything in CorelDraw and want to know how one goes about doing a color separation for cutting just the vinyl,
E.g. I have a 3 color design that I need to cut 3 different color sheets of vinyl. How do I go about setting up to cut?
Using CD x4.I cut directly from Corel. I was trying to do a simple 2 color vinyl job. I put reg marks but they are only on one layer. I tried copying but they weren't in the same place as the other layer.
Is there a way to get the Reg Marks to appear on all layers properly ?
when i cut vectors letters and numbers, its cuts but at every character it does not seem to completely fill the edges. so i always have to use my small nt cutter to do that.
i read the manuals, changed the offset, reduced the cut speed, increased the pressure and even convert to curves before i cut but the problem does not go away. the company where i bought it from is not very useful.
maybe because the machine is chinese i have a creation pcut ct630 vinyl cutter.also in coreldraw, i always use "harline" when cutitng anything is it correct?
Creation pcut ct 630 vinyl cutter
I know there are several high priced software solutions out there for the cutter. Is there a third party software that can take what is on the CorelDRAW Screen and sent it to the cutter with one click of the button. Something that does not open another program or that I have to import the design to. I want to simply click a button and start cutting.
what software you are using, How much you paid for it and what you like most about it. I am looking to increase production in the shop and if the design is all ready to cut, IE no overlapping lines, sized properly, etc. then why can we just send it to the cutters. Right no I have FlexiSign and hate the time it takes to Export, Import, Fix, then send to cut. The transition from a CorelDRAW file to that program drives me nuts and I just cant find a good filter to use that does not make me fix something that is just fine in CorelDRAW.
printing corel draw to a cutter plotter that does not register as a printer Eh720
View 2 Replies View Relatedwhy (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
How do I add my vinyl cutter t cut from Corel Draw X4
View 14 Replies View RelatedEvery time I send text to my vinyl cutter from CD it puts vertical lines thru some of the letters and cut them out... letters such as : D, O, Q, G, S and others. I have tried different fonts but they are all the same.
It seems as though I have a button pressed or something turned on but cannot figure what is wrong.
I would like to be able to use CorelDRAW X3to plot directly with my vinyl plotter without the need of exporting files etc... I recently trialled a program called CoCut by Eurosystems and it worked great but Im not real keen on shelling that much money on the program.
How to prevent other programs importing PLT files from Corel making all lines between nodes straight. It seems to only export the node location and not the info on curves or straight lines which means the other program simply fill in between the nodes with straight lines.
When I try to add a plotter, I get a message, "No DRC files were found in Autocad 2013 - English drivers directory."
The DRC files are in the DRVen-US directory, and is in my drivers search path. I have even changed the order of the search path to place that directory first, but no joy.
I'm starting some designs to be cut out of vinyl and wanted to put registration marks on the drawing so I can line different cuts up. How these work. How do I put registration marks in?
View 3 Replies View RelatedI have followed the instructions carefully and am unable to fill anything.
I make a rectangle. Choose the colour from the palette, drag the little coloured box over to the rectangle and release. Nothing. Many years ago I used my brothers Corel draw, so I know ( or knew then ) how to colour a rectangle.
I'm not able to assign a Hotkey to enable me to use Corel Capture. No matter what I use, it tells me that the Hotkey is already being used by this system. I have deleted Hotkeys and then then tried to reassign them to no avail.
View 14 Replies View RelatedWhen I export from Corel Draw as a jpg, then put the image online, on IE it shows as a red x.
View 5 Replies View Related0
false
18 pt
18 pt
0
0
false
false
false
I have a Toshiba laptop with Windows 7. It has a 500GB HD, 4GB RAM, 16" screen and CorelDRAW X5 and Summa's WinPlot bridge software installed. Everything runs perfectly.
I want to be able to cut vinyl letters from my Summa D75R vinyl cutter and then to cut a different colored outline to be applied over the top of those letters. The letters themselves, that is, the main body of the letters, I can cut with no problem.
I know that I will have to separate the two elements and cut the letters from one file and the outlines from a different file. As an experiment I created a single word with a color. I then created an outline for that word. I deleted the body of the letter leaving only the outline.
I then did a "Convert to Curves" on the outline and imported the image into the WinPlot software that my Summa D75R vinyl cutter uses. I sent the image to the cutter but it cut it as a solid letter. It did not make a double-line cut as it would have to do to make the image an outline.
Using CorelDraw X6 on Windows 8 x64, and a Kensington Expert Mouse (that's a type of trackball).
For some reason, I can't use the wheel to zoom in or out. Just doesn't work. The drivers are installed, and the wheel works fine in all other applications, but absolutely refuses to cooperate in CorelDraw X6.2 (had this issue since CorelDraw 6).
I have Corel Draw 12 on one computer and Corel 5 on my lap top - After following the simple video instructions to place a background image ( imported photo - jpg or tiff) into a set text the message box ...The object you selected is invalid - do you wish to try again pops up.
View 1 Replies View RelatedI am a long time user of Corel products (well, since Corel 4). I have been running Corel 12 for several years, as financially, as a pensioner it is not viable to keep up grading and 12 has been perfectly adequate. I am on Windows 7 Home premium, and I know that 12 was not designed for that platform, however it has been operation satisfactorily since 7 came out. Today, It has crashed, and I am unable to open photopaint at all either from the shortcut or the program list.
(Corel Draw, which is the only other part of the suite I use) appears to open and be available. I tried to repair with the original disk to no avail, so that having failed I did an uninstall, cleared the caches the temporary files and did a clean install. Corel Draw is still working, but Paint will not open at all. The logo appears then totally disappears after a few seconds leaving the desktop clear. There has been no changes to the computer recently and until last night the program was working fine.
I am using Windows Vista 32 bit OS.
I have used the X6 graphics suite for some time now and have always installed updates when notified. A couple of days ago I was notified of the latest update which I duly installed.
Thereafter I was unable to open Coreldraw. I was unable to resolve the issue by reverting to a previous versions from as few days previous. I have done this by using the usual windows uninstall facility.
However, when I try to reinstall the X6 suite from the CD I get an error message that says "A newer version of this program is installed. Delete this first before you install this version" (or words to that effect).
Clearly there is something that indicates a later version is installed but I cant find out why I am getting this message. I have endeavoured to delete everything I find associated with X6 but after rebooting I still can't reinstall the software.
I am trying to import a pdf file ford connect van template into CorelDraw x5 but am having no joy.
View 2 Replies View RelatedI can not see the preview of the clip arts when I need to choose one to insert it.
View 14 Replies View RelatedAfter successfully using Corel Draw for some years, I am suddenly unable to print files. Instead of the file, my printers just print a black page. I have tried re-installing but it has not worked.
View 1 Replies View RelatedWhen I am printing my design, the black is not printing. Have tried on two printers, neither are faulty. Wondered if I accidentally have it on a setting that doesn't allow it to print black.
View 3 Replies View RelatedI have one logo designed in Corel draw X5 and sent the file to the printer company ,they have corel draw12 on their PC and they are not able to open the design as it come as a blank page in corel draw12 .. how to open the same in corel draw 12..
View 3 Replies View RelatedI have a problem with printing in X5. All the documents I've worked in X4when I print the X5 have a problem with the colors, they are not the same with X4.
Printing with: HP inkjet 110 A0Riso RZ370, RZ590 A3Epson inkjet 1400 A3Canon laser LBP5200 A4HP laser 1010 A4
Having trouble opening an svg file in X6. Crashes both X5 and X6.
File available here : [URL] ....