I have a Roland SP54 with VersaWorks.
I design everything in CorelDraw and want to know how one goes about doing a color separation for cutting just the vinyl,
E.g. I have a 3 color design that I need to cut 3 different color sheets of vinyl. How do I go about setting up to cut?
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
Using CD x4.I cut directly from Corel. I was trying to do a simple 2 color vinyl job. I put reg marks but they are only on one layer. I tried copying but they weren't in the same place as the other layer.
Is there a way to get the Reg Marks to appear on all layers properly ?
when i cut vectors letters and numbers, its cuts but at every character it does not seem to completely fill the edges. so i always have to use my small nt cutter to do that.
i read the manuals, changed the offset, reduced the cut speed, increased the pressure and even convert to curves before i cut but the problem does not go away. the company where i bought it from is not very useful.
maybe because the machine is chinese i have a creation pcut ct630 vinyl cutter.also in coreldraw, i always use "harline" when cutitng anything is it correct?
Creation pcut ct 630 vinyl cutter
Having problems getting the advance key to highlight in this area. I have repeated these instructions and problem still is not resolved.
This is the area that I am having problems with. To customize a halftone screen.
1. Click File Print.
2. Click the Color tab.
3. Enable the Print separations option.
4.Click the Separations tab.
5. In the Options area, enable the Use advanced settings check box.
6. Click Advanced.
7. Change any of the following settings:
•Screening technology
•Resolution
•Basic screen
•Halftone type
You can set the screen frequency, screen angle, and overprint opt. ions for spot colors as well as process colors. For example, if you have a fountain fill made up of two spot colors, you can set one to print at 45 degrees and the other at 90 degrees.
How can I save the separations without having to manually seperate them into a printable file for the screen printer?
Is there a way I can print seps to file?
I print spot color separations using CorelDraw a lot. Just ungraded from X3 to X5. One problem I am having is in the printing dialog. When a file has, say, 4 colors showing up in the separations section I may only want to print 2 or three of them. I deselect the ones I don't want - but all 4 seps come out. I am wasting a lot of expensive separations.
View 3 Replies View RelatedThis discussion is on using RGB file creation techniques to output to ink jet devices. I posted the comments below the link because color management off always pops up in the conversation as it turns to non-postscript devices so I wanted to circumvent the side bar conversation.
[URL]....
First let's get this straight, I've written it and said it about a thousand times, you cannot turn off color management.
When you select simulate color management off in the default application color management dialog, CorelDRAW simply utilizes a different set of color management settings. The rules of color management never change! The application requires guidelines on color and still must have rules that govern conversions, PERIOD.
These rules are not different, only the engines, rendering intents and profiles change. These setting in X5 and X6 can be, in some cases adjusted to simulate previous setting in versions prior to X5 that were labeled color management off, but this label in older versions (X4 and older) were deceptive in their nature, color management was never turned off, just set to a specific configuration.
Simulate color management off (in X5/X6) uses wide gamut cmyk simulation as the CMYK profile, it disengages the color engines (setting CorelDRAW to another internally controlled process) and sets the interface to RGB. It does not turn color management off.
These settings have many uses for industries such as laser engraving and screen printing separations and I support their continued use. Do not confuse this and use these settings for professional output using press work, ink jets or digital printers.
In my color separations in print preview the "use advanced settings" is disabled.
I have loaded cdr graphics suite 12 on my new laptop w/windows 7, and also on my old machine that I have loaded windows 7 on. Cannot register the program any more due to outdated version. problem exists on both computers.
There are other minor issues but this one I use regularly.
I have a complex (includes tints) clip art object that needs printing in a specific pantone color I just convert it to grayscale using edit>find and replace objects>color mode. then print it as a black plate and just use another color on press.
Today I had to send off artwork to another printer. Dang. How to install a macro. Import clip art to be modified to a new document, do not do this in your working document.
Use Edit>Find and Replace> Find Objects
Replace a color model or palette. Next
Leave as is except change Replace with color model to "Grayscale" Next>Replace all
Repeat 2-4 for 'outlines' if you have them.There you now have a gray scale clipart, but the fun continues!You'll need to know what pantone color you want to use. Let's say Reflex Blue. Make a square and color it Reflex blue from a pantone palette.Duplicate the square and create swatches at 90% 80% 70% etc down to white.Select these square swatches, then Windows>Color Palette>Create Palette from Selection. Save palette with a temporary name, it is only time use. Or you could call it 'Reflex Blue'Now go to this website and download the macro "limit colors" URL...
Drop it in your GMS folder in under your username to install the macro. (might have to save the drawing and restart Corel...)Once you reopen your now grayscale clipart document, Select the clipart. Run the macro (Tools>Macros>Run Macros) LimitColors.Posterize select the number of colors in your new palette if you created 10% swatches, go with 11, if you did steps of 20% then you'll do 6 (don't forget white).Run the macro LimitColors.LimitColors and select your new palette you made in step 9.
0
false
18 pt
18 pt
0
0
false
false
false
I have a Toshiba laptop with Windows 7. It has a 500GB HD, 4GB RAM, 16" screen and CorelDRAW X5 and Summa's WinPlot bridge software installed. Everything runs perfectly.
I want to be able to cut vinyl letters from my Summa D75R vinyl cutter and then to cut a different colored outline to be applied over the top of those letters. The letters themselves, that is, the main body of the letters, I can cut with no problem.
I know that I will have to separate the two elements and cut the letters from one file and the outlines from a different file. As an experiment I created a single word with a color. I then created an outline for that word. I deleted the body of the letter leaving only the outline.
I then did a "Convert to Curves" on the outline and imported the image into the WinPlot software that my Summa D75R vinyl cutter uses. I sent the image to the cutter but it cut it as a solid letter. It did not make a double-line cut as it would have to do to make the image an outline.
Is there a way to change the outline color around a large group of images all at once?
I am trying to create an outline color for contour cutting and I have the outline color in my spot colors but now I was wondering if I could apply these change to all the images at once instead of changing each one.
I remember using it once for my commercial job in older version. I think it was ver. 11 or 12. Today when I tried HC separations, black appeared in all plates and a change I noticed is that all the colors are changed to Pantone HC process. I remember it well, it used to be CMYK + Pantone orange + Pantone Green.
I don't remember about the black color if it was separated on each plate or not.
I have downloaded an eps file, which I need to cut. I use a graphtec ce5000-60 cutter, and a plugin called cutting master 2 in order to use coreldraw.
when i select application launcher and choose cut / plot, it opens cutting master. when i do this, it only shows the 2 outer lines of the logo i need to cut. I have attached a screenshot so you can see exactly what I mean. I have tried lots of things to recitfy this, but as a complete beginner with this software, I really dont have a clue.
I have a problem with cutting the design, it actually prints it but not cut it. The error displays : Cut Data File Creation Error..
I'm using Corel Draw Graphics Suite X6, Raster Link, to print & cut using Mimaki CJV30-60..
What does the error actually mean & what do I need to do to resolve this?
Im trying to cut out the centre of the letter R below. Normally I break curve apart, select the centre, and trim it from the outer. I can then select the centre piece and remove it. As you can see, this has worked with the letters P & O. When I do it with the R it seems to have worked, to the point where I can even select the centre and remove it, but when I put it back over a coloured background, it is still white.
View 8 Replies View RelatedI have a design that I would like to cut in half so that I can cut half of it at at time on my vinyl cutter. I can't think of way to do it in Corel.
View 5 Replies View RelatedA customer sent me a jpeg of a white dove that they want printed on vinyl and then contour cut to put on their travel trailer. The picture was a very low dpi and I scanned it and increased the dpi to 150. I tried to trace it, but it just would not come out right.
My question is -- Can I put cutting lines around the dove as a bitmap and then be able to print and contour cut it out?
I just recently purchased a new computer and installed all my software. When I'm in corel draw and click on the icon to send to my plotter/cutter, the cutting Master 2 plug-in opens behind corel draw. It always opened in front of my corel screen on my older pc. how to get it to open in front of corel?
View 2 Replies View RelatedIm new to both coreldraw, and to the graphtec cutter, so my problem may have a very simple answer. Ive been playing around with it, learning how things work. Smaller images are no problem, but Im having trouble cutting larger images.
the plotter can cut up to a width of 610mm, and Im using 610mm vinyl. I need to cut some items that are 600mm wide. First time I tried, it left a gap on the left side of approx 50mm. It also stopped cutting approximately 20mm from the right side. next time, I loaded the vinyl into the machine 45mm further right and tried again. this time the left hand edge was positioned where I expected, but the right side still stopped in the same place as previously, leaving a gap of around 70mm on the right hand side. you would think I was trying to cut something bigger than the capacity of the cutter, but obviously this isnt the case.
if I have missed any necessary information etc, Im very new to all of this.
Have recently upgraded to corel 11, from 9, but at the same time upgraded my computer.
When I try to plot a simple circle shape on my Roland CM24 the image cuts twice and is extremely slow (juddering).
I believe the double cut is caused by the hairline & fill but messing around have only gone from double cutting each shape individually to do double cutting the whole image.
Using Corel to prepare images for cutting on a CNC plasma table. any easiest way to prepare images for cutting. With merging images, Lettering and original art work transfer. I need to convert to a DXF format to drop into the machine program (Sheetcam). I have used trace with some success. By this, I mean that the image "looked" good, but I seem to be doing something wrong because the graphic will not run on the machine.
View 3 Replies View RelatedWhen I step & repeat the crop marks are not there. How I get the crop marks for cutting multi up items.
View 5 Replies View RelatedIs there a way to apply a color to selected objects without having to search for the color in the color palette. So say if I am working with an image that has multiple colors but want to use only one of the colors in that image, is there a way to apply it without having to create or add it to the palette.
View 3 Replies View RelatedI am using X5 and print on a Cannon wide format inkjet printer. I use RGB colors, but I'm having a problem printing on adhesive vinyl. I used R255 G0 B0 that I've used on other medias, but it came out a little orange. I really need a good red to use with my settings.
View 1 Replies View RelatedI recently purchased Coreldraw Home and Student Suite from my local computer store, on there advice that this would work with a vinyl plotter.
I have since installed the software and it has not worked as it is not compatible with vinyl plotters.
I still use Corel Draw 12 and my question is is there an easy or automatic way to make the outline color of an object the same color as the fill color? I do it the hard way of trial and error until I get the right outline color from the color dock/pallette.
View 10 Replies View RelatedI'm having a major issue here, I use custom colors (created in my custom palette), X^ used to hold it very nicely, even in PDF exports etc.
Now - with the latest update, X6 "forgets" the custom colors, it resets it to default color, I have to manually set every object to the custom color all over again.
Is there anyway to transform a 4-color CorelDraw picture into a 2-color one at reasonably good quality?
The problem I met is at the galley.
I could, or might, only be able to get a 2-color printer at reasonably good price.
The original design is 4-color. But the actual detail is not very important.
They are book covers, which only need to protect the book.
The exported picture is shown below:
To create 2-color artwork from any colored vector clipart I used to be able to:
import colored clipart convert to CMYK if needed select entire graphic and create new styles with 2 parents change (edit) the colored parent to a named Pantone spot color (the child colors automatically become percentages of the Pantone spot color) "find and change" the remaining CMYK to Grayscale, and then back to CMYK (this ignors the spot color and converts the annoying rich blacks to percentages of K) export to a PDF file--which when imported into, say, InDesign, will separate on the K and Spot Color Plates only, in all its glorious shades of gray and tints of Pantone spot color.
I'm completely at a loss on how to do this in X6, and I'm on a short deadline.
We bought a JaguarIV plotter for cutting clear bra, but I was thinking that we could also use it to cut vinyl graphics. I have been watching some tutorials about paths and I'm getting quite good at manipulating curves and such. But I don't know if I can output to the plotter from GIMP. I tried just sending it as a print job, which I've heard you can do from Corel and Illustrator, but it didn't work.
View 3 Replies View Related