I installed Corel Draw 12 on a new machine with Vista HP, and I cannot git rid of the registration nag screen. I lost my registration info a long time ago, and have tried the "never register" option, but the nag screen keeps coming up.
View 3 RepliesSince today, I get the error mentioned in the subject when trying to open Corel Draw X5 (part of Suite X5). Running on WinXP. No previous problems. But I do think that it recently installed an automatic update.
I tried Repair (via Control Panel), but it did not work.
We have certain registration marks that we use on our designs before we print to vellum. How to be able to write a macro that could do the following? I've attached an example image of where we place the registration marks and am also attaching the actual registration mark CDR file. I'm assuming this would probably be rather simple...
We'd like this registration mark to be centered to the image and placed on the top and bottom of the image at .25 inches away from the image itself. So, I would think the macro would have to select the entire image on the page, then decide where .25 inches is away from the top and bottom of the image and place the registration mark, centered in that area.
How or were to find the crop mark / registration mark tools in x6.
View 5 Replies View RelatedUsing CD x4.I cut directly from Corel. I was trying to do a simple 2 color vinyl job. I put reg marks but they are only on one layer. I tried copying but they weren't in the same place as the other layer.
Is there a way to get the Reg Marks to appear on all layers properly ?
I'm trying to uninstall X5 to install it again. Because when I try and any of the programs connected to it I get blank screens. I'm completely dumbfounded.. When I click on it to "UNINSTALL" I also get the green bar for about 2 seconds, but the box is completely blank. No buttons or anything.
View 1 Replies View RelatedI opened my CorelDRAW X3 to find that the colours on screen look corrupted.
I use the "Optimised for professional output setting" in Colour Management which I never change.
Now, rather than looking fairly close to printed colours, they look very bright... too bright! (see screen shot)
I think that i have had this problem before and i ended up uninstalling and reinstalling. I would like to avoid this if i can as have have a lot of custom settings that i would have to re-do.
I’d like to copy an object a distance that I specify on screen. I can see how to copy a specified number of inches, but that is very awkward. You have to measure the distance (horizontal and vertical) and then input the numbers, then click “apply”. Is there a simpler way to do it?
Or is there a way to paste at a specified location? If I do an Edit>Copy then Edit>Paste, it pastes the new object on top of the old one.
I suspect that there is no way to do this, but it seemed so logical....How can I rotate the actual view of a page in DRAW? I have these box designs that I get handed, done somewhere else on the planet, with changes to various panels that are shown as upside down or at 90 degrees to the original page. I have to squint and cough backwards to read them.
Of course, for text, I can do an edit, but usually the text has been converted to curves many revisions ago. I looked, but could find no option for simply rotating the view, which would solve the problem.Surely there is a view "object" that gets filtered through the various existing View options, meaning that a simple set of transforms should also be able to rotate the entire pageview.
I do know how to kludge it, by selecting ALL and then rotating everything around a center point, but it requires than everything be selectable, and I use layers a LOT, for keeping the background frozen, for example. So, to get to a simple view of a small section on some sideways box tab, I have to unlock everything, select everything, rotate, edit, and then rotate back again and relock all the locked layers. It would make life simpler to have rotation as an option in View. Unless there's a better way???(And, no, the monitor is even harder to twist around.)
after installing the update to 6.2 on my spare system coreldraw just starts with it's welcome screen in any browser (standard-browser: ie, firefox or chrome) instead of corel itself. therefore i can't work with coreldraw anymore - even cannot close it. have to kill process in task-manager.
no uninstalling possible because of the same failure: uninstall opens a browser. so no uninstall possible.
no new installation from dvd possible, because the installer also opens an browser-window instead of an installer.
system: vista64 sp2
When you open the welcome screen and you choose "New from Template" the welcome screen in the background is missing the left side of the welcome screen.
And when you close the "new from template" window, it stays missing and you cannot choose any of your recent "open documents".
P.S. I have already tried the infamous "F4"
I'm receiving PDF files for screen printing. How do I convert to Corel Draw in order to print?
View 12 Replies View RelatedWell as much as I do design work for customers for tee shirts,I never had to do color separation, for the screens.I’m wondering how do you do this? ( how do you separate colors in corel, for screen printing) .
View 4 Replies View Relatedhow to work cereldraw x3 i was going fine with all my work then it just went white when i tried to do something not sure what and now i dont know how to get it back to normal i cans elect my work but cant see any of it
View 2 Replies View Relatedwhat the resolution is on the screen in Pixels mode? Where Corel finds the value of resolution?
View 11 Replies View RelatedFor some reason I cannot get the color management screen to open where you see the printer, monitor, and other things that are located there.
I tried clicked on tools -color management but it opens document setting and that's it.
I am using X-15 and just not sure what I am doing wrong.
I've been using these two programs for some time with no problem. I recently upgraded some of my adobe software and now when I try to open CorelDRAW of Photopaint, there is no welcome screen anymore and I can't click on anything.
Is there something conflicting with the welcome screen (flash or something that the welcome screen uses) that perhaps was installed with one of the adobe products, maybe? Not sure if it matters but I updated adobe dreamweaver and fireworks.Both programs are unusable now with this loading problem.
I am interested to know why with Corel Draw the quality of many of my images and text looks very poor on the screen, but when I publish to PDF they are how they should be. Is there any way of changing this so I see on the screen what the real quality looks like?
View 4 Replies View RelatedI am using CorelDRAW X4. I would like to add the Screen Dots to my texts or objects, but I don't know what to do, so who knows about this?
View 14 Replies View RelatedMy color toolbar on the right side of the screen is gone. How do I get it back?
View 3 Replies View RelatedWe have problems with some fonts, they display as rectangles on screen but prints just fine. Tested on both a W7 and a XP computer with all patches/updates installed. The same fonts displays fine in other applications...
View 3 Replies View RelatedI make an image 15.8 x 29.8 and when it prints out on my canon 8300 it is only 15.5 x 29.5 actual size measured on the canvas. the image is designed to wrap over the edge of stretchers 15 x29. the pics are 3 tenths inch short!
another pic is 15.5 x 29.25 instead of 15.5 x 29.5 so it is 1/4 inch short the long direction.don't recall having this problem before so why are the images not the same size in print that they are on the screen?
I can't see the text in several paragraph text boxes but they print fine. The outline is red on-screen but the contents aren't visable unless I print it.
Can I do something to the file, clean it, save as, reindex it, re-build it ?
I have some children's drawings that I want to screen print on a t-shirt. I have traced them with a sharpie so they are dark enough but my problem is they have alot of eraser marks showing up. What is the best way to get a good printable object.
View 6 Replies View RelatedWindows 7 64bit
i7 -3770 @ 3.40
GeForce GTX 550 Ti
16gigs ram
SSD Primary drive
**********************************
Since running x6 my system takes an unrealistic time to refresh graphics. I am working with a simple file and it takes 3 to four seconds to refresh after zooming in. My processor on CPU and Video card barely take a 20% hit.
Is Corel not setup to use the resources available? Is there some sort of Mad Hatter trick to fix it?
Here is a shot of the file I am working on after a fresh restart.
Is there a way to display in full screen preview page only, meaning nothing outside page borders, no bleed or objects around page just.
View 13 Replies View RelatedHow can I create a halftone for screen printing on textiles. I need to have vectored dots.
View 5 Replies View RelatedThis time, my color palette that was on the right side of my screen is gone. How do I get it back on there?
View 3 Replies View RelatedI did something on the screen and removed the tool bar on the left side of the screen. How to get it back?
View 2 Replies View RelatedHow to adjust the color display on the monitor screen between photoshop and coreldraw to display the same color display
View 14 Replies View RelatedI just got a new touch screen computer and Photo-Paint doesn't even respond to touch events. Is there a patch for this? I also have the unmentionable CC program and it half works by dragging my finger from outside the document then dragging into the doc - which is totally unworkable.
I've read Sony, Toshiba and Asus touch computers aren't compatible with that "other" paint package and Corel. What's the workaround? This is just a shame that no touch screen computers work with them.
Are there any touch screen computersout there that working with drawing packages? Or at least Corel?