I have some children's drawings that I want to screen print on a t-shirt. I have traced them with a sharpie so they are dark enough but my problem is they have alot of eraser marks showing up. What is the best way to get a good printable object.
View 6 Replies
I am using Corel for driving a fiber laser through a dedicated Net connection not available to the rest of the network and it and my computer are right next to the switch.
My problem is that when I send a job from the PC to the laser it works fine. If I make a small change on the graphics, I save it and send a new job to the laser. Quite often, some part of my grapics is left off the plot even though I didn't touch that graphic or mod it. So I send the job over again and now somewhere else is missing some of the graphic word...usually a word or a letter or number. I usually turn off the computer or get out of Corel and come back in and it is fixed. That doesn't sound like a network dropped or corrupted graphic. I have tried turning off the laser with Corel still up and it doesn't fix the problem when I bring the laser on line again.
I often toggle between Portrait and Landscape when I begin working out a layout. Is there an easy way to make the Printable Area dotted lines automatically follow suit? My printer's default is already set to "Match Orientation".
Up till now I have been going to File>Print Setup>Preferences>Layout>Portrait or Landscape for each and every toggle!
I want to create a watermark layer that is hidden (non visible), but is "printable" so it shows when I export to PDF.I can only get it to display is I show (make visible) that layer.
View 10 Replies View RelatedI often have the need to remove the drop shadow effect. Currently what I do is to "Break Drop Shadow Group Apart" then delete it from object manager. However with other effects such as Transparency, I can simply set the Effect to None. Can this be done with Drop Shadow?
View 4 Replies View RelatedI have a rather large job, a book with 370 pages. when we want to reprint w/o any changes i would like to turn off the print preview to eliminate the delay.
How to bypass the print preview?
When I create something with an outline, the outline will increase or decrease in thickness as I resize the image. So if I have something at say 10" X 10" at 4pt outline, when I resize it to 2" X 2" the outline is like 5X thicker and messes everything up.
Is there a way to combine or something with a vector so the outline auto changes or never changes thickness when resizing the graphic?
I have CorelDraw 11. and I want to turn the Auto Caps off.
So if I type MHz Corel wont turn it into Mhz.
I've never used bullets in Corel Draw 12 before until today - regardless - they are not working.
Issue: When I select a bullet, the first one works - I then hit return and the next bullet is a ? with box around it. Looks almost like the program lost it's source path for the bullet to me?
Im new to X6 from version 9 so I'm pretty clueless (and I'm self taught at that). How do I turn off the "auto edge detect" or whatever its called? For example...When I'm drawing with the Bezier or freehand tool and I am trying to go in between a tight space its constantly wanting to got to one of the edges.
View 2 Replies View RelatedI need to make a design which would have something like a page turn in the right bottom corner. It should look like this:
How to make this? Obviously I can't draw it manually. Is there a way to download this in a vector form? Or is the drawing the only way?
if you have something selected and you press the minus key on the numberpad, you get a copy and paste of your selection. Unfrotunatly, I do not see a place to change this ANYWHERE under customization. how this can be turned off?
View 6 Replies View RelatedIn the object manager docker, is there some way to turn off the information that appears when you hover the cursor over an item? I found that turning off tooltips does not affect it.
View 2 Replies View RelatedWhenever I type a url or web address Corel insists upon underlining and making it a link; how do I turn this off. I highlight the url and remove the address from the url field and click apply and it takes numerous times repeating this process to remove the link. I want to turn it off so it does not automatically create a link.
View 3 Replies View RelatedI installed Corel Draw 12 on a new machine with Vista HP, and I cannot git rid of the registration nag screen. I lost my registration info a long time ago, and have tried the "never register" option, but the nag screen keeps coming up.
View 3 Replies View RelatedI'm trying to uninstall X5 to install it again. Because when I try and any of the programs connected to it I get blank screens. I'm completely dumbfounded.. When I click on it to "UNINSTALL" I also get the green bar for about 2 seconds, but the box is completely blank. No buttons or anything.
View 1 Replies View RelatedI opened my CorelDRAW X3 to find that the colours on screen look corrupted.
I use the "Optimised for professional output setting" in Colour Management which I never change.
Now, rather than looking fairly close to printed colours, they look very bright... too bright! (see screen shot)
I think that i have had this problem before and i ended up uninstalling and reinstalling. I would like to avoid this if i can as have have a lot of custom settings that i would have to re-do.
I’d like to copy an object a distance that I specify on screen. I can see how to copy a specified number of inches, but that is very awkward. You have to measure the distance (horizontal and vertical) and then input the numbers, then click “apply”. Is there a simpler way to do it?
Or is there a way to paste at a specified location? If I do an Edit>Copy then Edit>Paste, it pastes the new object on top of the old one.
I suspect that there is no way to do this, but it seemed so logical....How can I rotate the actual view of a page in DRAW? I have these box designs that I get handed, done somewhere else on the planet, with changes to various panels that are shown as upside down or at 90 degrees to the original page. I have to squint and cough backwards to read them.
Of course, for text, I can do an edit, but usually the text has been converted to curves many revisions ago. I looked, but could find no option for simply rotating the view, which would solve the problem.Surely there is a view "object" that gets filtered through the various existing View options, meaning that a simple set of transforms should also be able to rotate the entire pageview.
I do know how to kludge it, by selecting ALL and then rotating everything around a center point, but it requires than everything be selectable, and I use layers a LOT, for keeping the background frozen, for example. So, to get to a simple view of a small section on some sideways box tab, I have to unlock everything, select everything, rotate, edit, and then rotate back again and relock all the locked layers. It would make life simpler to have rotation as an option in View. Unless there's a better way???(And, no, the monitor is even harder to twist around.)
after installing the update to 6.2 on my spare system coreldraw just starts with it's welcome screen in any browser (standard-browser: ie, firefox or chrome) instead of corel itself. therefore i can't work with coreldraw anymore - even cannot close it. have to kill process in task-manager.
no uninstalling possible because of the same failure: uninstall opens a browser. so no uninstall possible.
no new installation from dvd possible, because the installer also opens an browser-window instead of an installer.
system: vista64 sp2
When you open the welcome screen and you choose "New from Template" the welcome screen in the background is missing the left side of the welcome screen.
And when you close the "new from template" window, it stays missing and you cannot choose any of your recent "open documents".
P.S. I have already tried the infamous "F4"
i´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
I'm receiving PDF files for screen printing. How do I convert to Corel Draw in order to print?
View 12 Replies View RelatedWell as much as I do design work for customers for tee shirts,I never had to do color separation, for the screens.I’m wondering how do you do this? ( how do you separate colors in corel, for screen printing) .
View 4 Replies View Relatedhow to work cereldraw x3 i was going fine with all my work then it just went white when i tried to do something not sure what and now i dont know how to get it back to normal i cans elect my work but cant see any of it
View 2 Replies View Relatedwhat the resolution is on the screen in Pixels mode? Where Corel finds the value of resolution?
View 11 Replies View RelatedFor some reason I cannot get the color management screen to open where you see the printer, monitor, and other things that are located there.
I tried clicked on tools -color management but it opens document setting and that's it.
I am using X-15 and just not sure what I am doing wrong.
I've been using these two programs for some time with no problem. I recently upgraded some of my adobe software and now when I try to open CorelDRAW of Photopaint, there is no welcome screen anymore and I can't click on anything.
Is there something conflicting with the welcome screen (flash or something that the welcome screen uses) that perhaps was installed with one of the adobe products, maybe? Not sure if it matters but I updated adobe dreamweaver and fireworks.Both programs are unusable now with this loading problem.
I am interested to know why with Corel Draw the quality of many of my images and text looks very poor on the screen, but when I publish to PDF they are how they should be. Is there any way of changing this so I see on the screen what the real quality looks like?
View 4 Replies View RelatedI am using CorelDRAW X4. I would like to add the Screen Dots to my texts or objects, but I don't know what to do, so who knows about this?
View 14 Replies View RelatedMy color toolbar on the right side of the screen is gone. How do I get it back?
View 3 Replies View Related
