Im new to X6 from version 9 so I'm pretty clueless (and I'm self taught at that). How do I turn off the "auto edge detect" or whatever its called? For example...When I'm drawing with the Bezier or freehand tool and I am trying to go in between a tight space its constantly wanting to got to one of the edges.
View 2 Replies
I have CorelDraw 11. and I want to turn the Auto Caps off.
So if I type MHz Corel wont turn it into Mhz.
if you have something selected and you press the minus key on the numberpad, you get a copy and paste of your selection. Unfrotunatly, I do not see a place to change this ANYWHERE under customization. how this can be turned off?
View 6 Replies View RelatedI have a series of complex shapes that look like solid shapes but they are separated. When I try to auto close, the lines shoot all over the place. The open ends of the lines are physically touching or at least very close.
Can you set a tolerance so that two lines touching each other connect?
I am looking for a (preferably free) Auto Dimension Macro for X6.
View 5 Replies View RelatedEvery time you save a file it creates an autobackup file.
Maybe an option not to overwrite them that way they accumulate. Also place them all in a certain folder or even a sub folder.
I often have the need to remove the drop shadow effect. Currently what I do is to "Break Drop Shadow Group Apart" then delete it from object manager. However with other effects such as Transparency, I can simply set the Effect to None. Can this be done with Drop Shadow?
View 4 Replies View RelatedI have a rather large job, a book with 370 pages. when we want to reprint w/o any changes i would like to turn off the print preview to eliminate the delay.
How to bypass the print preview?
When I create something with an outline, the outline will increase or decrease in thickness as I resize the image. So if I have something at say 10" X 10" at 4pt outline, when I resize it to 2" X 2" the outline is like 5X thicker and messes everything up.
Is there a way to combine or something with a vector so the outline auto changes or never changes thickness when resizing the graphic?
Since older versions of CorelDRAW that I have set the recovery time for Auto-Backup saving time as 3 minutes only, in order to reduce the partial loss of job, when the program crashes.I'm doing a series of small illustrations vectorized (yes, hundreds of them!) and I intend to reduce this time for just 1 (one) minute!This time decreased in 2 minutes (from 3 to 1) can make a difference, because some of these vectors are made fast, and unless those two minutes, I may lose some illustrations if freezing or any other irregular behavior of the software and/or Operating System, though these illustrations are subdivided into several files (simple vectors) and do not consume a lot of RAM.
Reducing the time of Auto-Backup for just 1 min is a risk, or how it can affect the performance of the software or OS? Or one thing does not interfere to another? [URL]
I am trying to create a website for my company. I am trying to make it an auto height adjusting website. How do I do that in CorelDraw 12? Also, what is the optimum pixel size that I should set to the page? Right now I have it at 1140 pixels x 900 pixels.
View 12 Replies View RelatedI have seen a reference to the auto close gaps button on the toolbar of CorelDraw.I need something like that, because whatever I do I cannot fill my lineart with the smartfill tool, even though I have closed all the gaps, as far as i can tell.
I am wondering if there is a problem with my Coreldraw X5 Software.I am using it on an iMac with Parallels.
I'm a Corel Draw X5 user, and want to automate the filling of text blocks with dummy text.
View 3 Replies View RelatedIs there an automated way to have all the nodes in an (open) curve that are close to eachother to either join or connect with a line ?
"Auto close" dont offer settings and doesnt seem to do this
The user is having a problem with imported jpgs. When she creates a Corel document, she usually imports a jpg as a background, then places text over it. When she prints, the text created in Corel is in color, but the imported jpg is B&W. The issue just started. She has used Corel 11 for some time.
View 2 Replies View RelatedI've never used bullets in Corel Draw 12 before until today - regardless - they are not working.
Issue: When I select a bullet, the first one works - I then hit return and the next bullet is a ? with box around it. Looks almost like the program lost it's source path for the bullet to me?
I need to make a design which would have something like a page turn in the right bottom corner. It should look like this:
How to make this? Obviously I can't draw it manually. Is there a way to download this in a vector form? Or is the drawing the only way?
FBCL0017.jpg
I need to cut this football image out on my vinyl cutter, I tried boundry and contour but it keeps picking up the black center too. I need to just cut the outer edge.
I have some children's drawings that I want to screen print on a t-shirt. I have traced them with a sharpie so they are dark enough but my problem is they have alot of eraser marks showing up. What is the best way to get a good printable object.
View 6 Replies View RelatedIn the object manager docker, is there some way to turn off the information that appears when you hover the cursor over an item? I found that turning off tooltips does not affect it.
View 2 Replies View RelatedWhenever I type a url or web address Corel insists upon underlining and making it a link; how do I turn this off. I highlight the url and remove the address from the url field and click apply and it takes numerous times repeating this process to remove the link. I want to turn it off so it does not automatically create a link.
View 3 Replies View RelatedI have an existing X6 document which has a rectangle object with a Lens attached.
I did not create the document, so what sort of lens it is and what settings the lens has. I suspect it is a transparency lens.
I cannot find any way to locate the settings for this lens - so that I can reproduce and modify the lens settings. Where i can find the settings for the lens?
Is there a good (better?) way to find a local printer? I am just starting a desktop publishing business, part time, out of my home and I would like to find a good local printer in the Calgary, Alberta area. Do I just go thru the yellow pages and try my luck?
View 2 Replies View RelatedWhy does the find and replace functionality have to be so sloppy to use? I have a customer that sends me cmyk drawings and I need them to be rgb. They also have lines that need to be changed to hairline from .25pt. It's frustrating how difficult this is to accomplish due to the sloppy interface that CD has had ever since I've been using it - since v12.
How hard would it be to allow you to change the palette, line width and colors on lines and outlines in one step? Right now it's multiple steps and don't forget once to change the target color palette or you'll convert everything back to cmyk...
I used the "find and replace text" and although my spelling was correct, it dindn't "find" it... But now the box wont go away and I cannot do ANYTHING on my page!!!
View 2 Replies View RelatedI just started using CorelDraw X5 (previously used version 10 or 12) and I can't find the Bezier tool. When I watch tutorials it looks like it should be under my curve tools, but it definitely isn't. Do I have a setting turned off or something... or is this a glitch?
View 10 Replies View RelatedI have elements 11. Looked through all Q & A. can't find auto analyzer to turn off.
Coming up as a problem while trying to update. Tried as suggested
Org.
Edit
Pref.
Media (no alanyzise there)
First time I've used this program and very frustrating.
Stitch.png
I would like to add a white highlight to the eye of one of my images like the one in this image......so that it is white in the middle then gently fades to black without having a line around the edge. Been trying to do it but can't get the same effect.
Is it possible to do transparency all around the edge of an object. say you had drawn a circle can you make the edge all around transparent or say make just the middle transparent?
I often find that I would love to fade out in more than one direction.
[URL]......
I would like to cut out an oval shaped photo and insert it into the corner of a larger photo. The question is I would like the edge of the oval photo to fade away so it has a soft edge. How to I achieve this edge.
View 3 Replies View RelatedIs it possible to have a square with 4 edges of different color.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
