I have a series of complex shapes that look like solid shapes but they are separated. When I try to auto close, the lines shoot all over the place. The open ends of the lines are physically touching or at least very close.
Can you set a tolerance so that two lines touching each other connect?
I have seen a reference to the auto close gaps button on the toolbar of CorelDraw.I need something like that, because whatever I do I cannot fill my lineart with the smartfill tool, even though I have closed all the gaps, as far as i can tell.
I am wondering if there is a problem with my Coreldraw X5 Software.I am using it on an iMac with Parallels.
Is there an automated way to have all the nodes in an (open) curve that are close to eachother to either join or connect with a line ?
"Auto close" dont offer settings and doesnt seem to do this
how do you close a path in x6? i select the two duped lines then go to arrange but no close path option. i did it in x4.
View 2 Replies View RelatedPrint preview shows objects spaced correctly. But when it prints them, it compresses them together on the page (but the objects are sized correctly).
When I print the same file from a different computer on the network to the same printer, the objects are spaced correctly.
Which leads me to conclude it's a setting in CorelDraw on the first computer. Also, I reset all the default settings in CorelDraw using the F8 technique, but that didn't solve the problem.
When using CorelDraw x5 the program seems to just randomly close, with no error message or freezing. It just disappears from the screen and I have to re-open it. I cannot pin point when it is doing it, because it keeps closing upon random tasks, not like it closes every time I try the same thing like saving.
View 5 Replies View RelatedCorelDRAW X6 has been lovely and fast for me these last few months but the reason I quit Corel for a number of years was that, after a while it seemed to slow down. Now, suddenly, when I save a file of exit the program freezes for approx 35 seconds before finally closing. It makes no difference where I save the file (on my SSD C Drive or elsewhere). I have a 6 core, 32gb RAM etc and, as I was saying, it worked until today but suddenly this.
View 8 Replies View RelatedClose font.gif
I have a close font but the 'g' needs to be open as in Arial.
I use CorelDRAW on a daily basis and recently the program takes a lot of time to open/close/save my files, or sometimes it'll simply freeze.
View 6 Replies View RelatedIn X4 there was the option under the Arrange menu to Close Path with several different options like this.
In Corel X5 this option is absent. Is there something equivalent?
Any macro that will close the Object Manager Docker then re open it again? Due to the bug with it, the objects in it disappear, or the icons for visible and print stop toggling, so I have to close it and reopen it. Tried recording one, but the recorder ignored my closing and opening. Just thought it would be handy, for when it locks up like that to press one button, rather multiple buttons and menus.
View 7 Replies View Relatedwhat is the best way to close an object consisting of multiple individual lines to enable a fill color? So far I've just been retracing the objects, but there has to be an easier way.
View 4 Replies View Relatedwhen i cut vectors letters and numbers, its cuts but at every character it does not seem to completely fill the edges. so i always have to use my small nt cutter to do that.
i read the manuals, changed the offset, reduced the cut speed, increased the pressure and even convert to curves before i cut but the problem does not go away. the company where i bought it from is not very useful.
maybe because the machine is chinese i have a creation pcut ct630 vinyl cutter.also in coreldraw, i always use "harline" when cutitng anything is it correct?
Creation pcut ct 630 vinyl cutter
I have a major problem with PhotoPaint X5 after SP2. I have an image of a movie poster from internet. Let's say about 1000x1500 pixels. I make the width 300 px. (height will be 440 or more) Than I make a new document of 300x430 pixels. Copy and paste the first file into the second. Move it up and/or down with the arrow keys to have a good composition. Than I combine the image with the background (shift/control/arrow down) and save it to rest.jpg. When I want to close the original image in CorelPaint I get the Corel A.R.M. window. I tried a few times without combining the image to the background and than I CAN close the file without crashing PP. I'm glad I found a workaround since I do these actions quit a lot for my movie and music database. But it took a lot a time to figure out where it went wrong. So according to my tests it must have something to do with combining the image to the background. Sometime when nudging the image a couple of times up and down crashses PP too when I then combine the image and background. At that point i don't come a far as exporting.
View 9 Replies View RelatedI have CorelDraw 11. and I want to turn the Auto Caps off.
So if I type MHz Corel wont turn it into Mhz.
Im new to X6 from version 9 so I'm pretty clueless (and I'm self taught at that). How do I turn off the "auto edge detect" or whatever its called? For example...When I'm drawing with the Bezier or freehand tool and I am trying to go in between a tight space its constantly wanting to got to one of the edges.
View 2 Replies View RelatedI am looking for a (preferably free) Auto Dimension Macro for X6.
View 5 Replies View Relatedif you have something selected and you press the minus key on the numberpad, you get a copy and paste of your selection. Unfrotunatly, I do not see a place to change this ANYWHERE under customization. how this can be turned off?
View 6 Replies View RelatedEvery time you save a file it creates an autobackup file.
Maybe an option not to overwrite them that way they accumulate. Also place them all in a certain folder or even a sub folder.
Since older versions of CorelDRAW that I have set the recovery time for Auto-Backup saving time as 3 minutes only, in order to reduce the partial loss of job, when the program crashes.I'm doing a series of small illustrations vectorized (yes, hundreds of them!) and I intend to reduce this time for just 1 (one) minute!This time decreased in 2 minutes (from 3 to 1) can make a difference, because some of these vectors are made fast, and unless those two minutes, I may lose some illustrations if freezing or any other irregular behavior of the software and/or Operating System, though these illustrations are subdivided into several files (simple vectors) and do not consume a lot of RAM.
Reducing the time of Auto-Backup for just 1 min is a risk, or how it can affect the performance of the software or OS? Or one thing does not interfere to another? [URL]
I am trying to create a website for my company. I am trying to make it an auto height adjusting website. How do I do that in CorelDraw 12? Also, what is the optimum pixel size that I should set to the page? Right now I have it at 1140 pixels x 900 pixels.
View 12 Replies View RelatedI'm a Corel Draw X5 user, and want to automate the filling of text blocks with dummy text.
View 3 Replies View RelatedThe user is having a problem with imported jpgs. When she creates a Corel document, she usually imports a jpg as a background, then places text over it. When she prints, the text created in Corel is in color, but the imported jpg is B&W. The issue just started. She has used Corel 11 for some time.
View 2 Replies View RelatedWhen I'm gonna write my program stops and appears a box that says Run time error and close my program. What is that, what I coul do?
View 1 Replies View Relatedwhy (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies View RelatedOften whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies View Relatedi´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
Entire Corel suite freezes on start up - I cannot do anything. Reinstalling also does not work - suddenly buttons on the installer dissapeared - there is no text on them and when I click them nothing happens.
A week ago I have installed service pack 3 and everything worked fine. It has all gone wrong again. And installation of the latest patches does not work anymore.
I am running Windows 7 64-bit and I've got a feeling that is must have something to do with system updates.
I often create graphics in CorelDRAW export it and inserting it into my MS Word documents and finally convert my documents to pdf. When it is vector graphics, exporting as EPS works fine: The increase in file size is small and lines are displayed perfect independant of how much you zoom in the final pdf document. When I handle bitmaps, I usually export as JPG (or PNG), which works well too. My problem arise when I have a mixed vector and bitmap image. I have imported a bitmap into CorelDRAW and created some lines on top of it. I want to export it as a whole. If I export as EPS, the final result is fine, but filesize has increased considerable. If I choose to export as jpg, the filesize is fine, but the lines are getting slightly blurry. Is there a way to get the best of both Worlds - resonable filesize and perfect lines? Maybe settings in some dialog??
View 7 Replies View Related
