CorelDRAW Graphics Suite X5 :: Auto-Backup / Reducing Saving Time?
Jun 19, 2011
Since older versions of CorelDRAW that I have set the recovery time for Auto-Backup saving time as 3 minutes only, in order to reduce the partial loss of job, when the program crashes.I'm doing a series of small illustrations vectorized (yes, hundreds of them!) and I intend to reduce this time for just 1 (one) minute!This time decreased in 2 minutes (from 3 to 1) can make a difference, because some of these vectors are made fast, and unless those two minutes, I may lose some illustrations if freezing or any other irregular behavior of the software and/or Operating System, though these illustrations are subdivided into several files (simple vectors) and do not consume a lot of RAM.
Reducing the time of Auto-Backup for just 1 min is a risk, or how it can affect the performance of the software or OS? Or one thing does not interfere to another? [URL]
View 17 Replies
ADVERTISEMENT
Jan 21, 2012
Every time you save a file it creates an autobackup file.
Maybe an option not to overwrite them that way they accumulate. Also place them all in a certain folder or even a sub folder.
View 4 Replies
View Related
Apr 14, 2009
I have a number of files which were prepared in Corel Draw which I would like to post online. The designer has supplied the PDF versions of these files, however, the files sizes are too large for web usage. A 8 pg document is 5Mb. I have tried reducing the sizes by compressing in Acrobat; importing the PDFs into Corel Draw and re-creating PDF files with reduced resolution; recreating the PDF without the bitmap images (there are about 10 images)..yet the file size of the PDF does not change significantly.
What else can I do to reduce the file size of the generated PDF files? The files are newsletters, so most of the content is text and a few shapes and lines.
View 6 Replies
View Related
Oct 18, 2011
Trying to recreate logo. Traced text. The text is too rough. I've selected it, click the shape tool, and the Smoothing bar does not work. It stays at "0" and does not effect the selected curve.
I've tried just drawing a shape with jagged edges and the Smoothing bar still does not work. Am I missing a step to make the Smoothing bar apply?
View 13 Replies
View Related
Oct 8, 2012
in corel x6 when we save document for 1st time corel doesn't creates back up file.
View 8 Replies
View Related
Aug 6, 2011
what to copy from my home installation of Coreldraw 12 so I can put it on the installation I use at work. I want to save EVERYTHING, hotkeys, default new documents, default and custom palletes, macros, command customizations were I have applied certain hotkeys like ctrl+m or whatever to run those custom made macros/vba scripts, things like snap to grid, snap to object, wether or not to save backups and if so how often, etc... Bascialy ABSOLUTLEY EVERYTHING.
I tried copying CorelDrw.ini, coreldrw.env, and GlobalMacros from my home computer from the folder:
C:Program FilesCorelCorel Graphics 12Draw
and then pasting it into the same folder on my work machine, clicking OK when asked if I want to replace the already existing files there. Some things worked, some things seemed not to. For example, the macros i wrote copied over fine, but the hot key association i made for them didnt, i had to set that up again in Customization.
I would love to find out how I can really back up all my settings so I can simply copy them over to my work machine instead of taking a couple hours to re-enter everything in. Also, I think all serious corel users would want to keep a backup copy handy in case they ever have to re-install corel or if they buy a new computer, etc.
View 12 Replies
View Related
Apr 11, 2012
I have CorelDraw 11. and I want to turn the Auto Caps off.
So if I type MHz Corel wont turn it into Mhz.
View 2 Replies
View Related
Jan 3, 2013
I have a series of complex shapes that look like solid shapes but they are separated. When I try to auto close, the lines shoot all over the place. The open ends of the lines are physically touching or at least very close.
Can you set a tolerance so that two lines touching each other connect?
View 6 Replies
View Related
Jul 17, 2013
Im new to X6 from version 9 so I'm pretty clueless (and I'm self taught at that). How do I turn off the "auto edge detect" or whatever its called? For example...When I'm drawing with the Bezier or freehand tool and I am trying to go in between a tight space its constantly wanting to got to one of the edges.
View 2 Replies
View Related
Dec 9, 2013
I am looking for a (preferably free) Auto Dimension Macro for X6.
View 5 Replies
View Related
Sep 3, 2011
if you have something selected and you press the minus key on the numberpad, you get a copy and paste of your selection. Unfrotunatly, I do not see a place to change this ANYWHERE under customization. how this can be turned off?
View 6 Replies
View Related
Sep 10, 2013
Is there any solution, as powerclip is consuming much time to come out of.... and also note that it is having many objects inside the powerclip. It should not act like a normal object, consumes much memory and time
View 3 Replies
View Related
Feb 24, 2009
I am trying to create a website for my company. I am trying to make it an auto height adjusting website. How do I do that in CorelDraw 12? Also, what is the optimum pixel size that I should set to the page? Right now I have it at 1140 pixels x 900 pixels.
View 12 Replies
View Related
Apr 18, 2011
I have seen a reference to the auto close gaps button on the toolbar of CorelDraw.I need something like that, because whatever I do I cannot fill my lineart with the smartfill tool, even though I have closed all the gaps, as far as i can tell.
I am wondering if there is a problem with my Coreldraw X5 Software.I am using it on an iMac with Parallels.
View 9 Replies
View Related
May 2, 2012
I'm a Corel Draw X5 user, and want to automate the filling of text blocks with dummy text.
View 3 Replies
View Related
Jul 28, 2011
Is there an automated way to have all the nodes in an (open) curve that are close to eachother to either join or connect with a line ?
"Auto close" dont offer settings and doesnt seem to do this
View 7 Replies
View Related
Jul 25, 2012
The user is having a problem with imported jpgs. When she creates a Corel document, she usually imports a jpg as a background, then places text over it. When she prints, the text created in Corel is in color, but the imported jpg is B&W. The issue just started. She has used Corel 11 for some time.
View 2 Replies
View Related
Aug 24, 2012
Time to increase the size of the options box as well as give it a little attention. It hasn't changed much since, ... well, forever.
Monitors are huge, so lets make it happen. I don't like having to scroll sideways with the slider to see full name of macros or tools when customizing.
View 11 Replies
View Related
Apr 12, 2012
I have problem with opening the corel draw 12 software. When i opened this, the program hangs all the time and cant access anymore.
View 4 Replies
View Related
Aug 19, 2011
I recently bought a new laptop with Windows 7 64 bit OS, and installed the CorelDraw X5(worked fine on an older XP machine) on it, the application crashes every time when the progress showing "Creating Application Environment". I tried to run it under XP compatible mode, tthe only difference is now the Regstration works, but the app still crashes every time.
View 1 Replies
View Related
Jul 25, 2007
how to covert a PDF file to CorelDraw? I have tried saving the PDF as an EPS and then opening it in CorelDraw, but it only displays a grey box which states "Illustrator 7.eps".
View 14 Replies
View Related
Oct 5, 2011
A fix has been released for saving to JPG and PNG after installing SP3. [URL]........
View 2 Replies
View Related
Nov 26, 2013
I have several cards that i have designed in CorelDraw x6 (64 bit)
Each CorelDraw card file varies in size from between 5 & 15mb each ...i have exported each as jpegs & they look great onscreen!
i need to get the cards printed now & the printer asked for a pdf file with the cards files in
I have hardly ever used pdf's at all so know very little
Using the Corel preset "Export to pdf" option in CorelDraw the pdf file size comes out at 12mb for EACH INDIVIDUAL card ....is there anyway to get the pdf at the same quality & size as my jpegs??
View 8 Replies
View Related
Apr 20, 2012
Is there a way to have my custom settings load when exporting a .jpg every time, without having to use the dropdown and select mine every single export?
View 2 Replies
View Related
Apr 1, 2011
I have a patern, I need to move, I know in advanced I can more it with Origin, but I have to close and open the window.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
View 1 Replies
View Related
Aug 2, 2011
I use CorelDRAW on a daily basis and recently the program takes a lot of time to open/close/save my files, or sometimes it'll simply freeze.
View 6 Replies
View Related
Jan 15, 2013
Not sure if this is expected behavior but I've found that it's only possible to snap to one type of guide/grid at any given time.
For example if you want to snap to a guideline in the horizontal and the pixel grid in the vertical, you won't be able to. Instead, the snap will work on the guide and completely ignore the pixel grid.
View 10 Replies
View Related
Aug 8, 2011
When i start corel it takes really long time to create new document. Or when i save document it also takes a lot of time. I resest workspace, clear temp directory, what else could i do?? This all started without any reason. I shout down pc, and now i turned it on, and since then corel is not working ok...
View 13 Replies
View Related
Jun 24, 2011
I have a new Corel product...Graphics Suite X4 Home version operating on Windows 7. I have designed several flyers and attempted to save as a PDF file to send to an associate. However the PDF option is not available in the selection box.
So I attempted to download Service Pack 2 for Suite X4 but the installation fails on three attempts.
View 4 Replies
View Related
Feb 4, 2008
Is there any other way to save X4 files to X3 without going into the save dialog and changing the version you want it to be saved in? Also Is there any other way for me to convert all rgb in a document to cmyk without selecting the objects or using the object manager?
View 5 Replies
View Related
Jun 17, 2011
I am having an issue saving file changes. I can create a file and save it, but if I make a change and try to save it again I get an error that says that the file is open elsewhere.
View 3 Replies
View Related
