When i start corel it takes really long time to create new document. Or when i save document it also takes a lot of time. I resest workspace, clear temp directory, what else could i do?? This all started without any reason. I shout down pc, and now i turned it on, and since then corel is not working ok...
View 13 Replies
Is there a way to have my custom settings load when exporting a .jpg every time, without having to use the dropdown and select mine every single export?
View 2 Replies View RelatedI have had CorelDRAW X6 for about 6-months with no problems. Recently I try to open X6 and the load time is extremly long. Once it finally loads the screen looks normal but when I click on anything on the screen i just get a "ding" sound and the screen is frozen. I actually have to go to task manager to shut it off.
Once in a while I can open a previous design and then everything will work fine. I thought I would try to re-install the software. I tried to uninstall but when I get to the uninstall page I see three options "Modify", "Repair", or "Remove". I can click on these but there is not other botton on the page like and OK or Continue, so I am stuck.
This software is very important to my t-shirt design business. how to either get it to load normally and act normal or at least be able to uninstall and re-install?
I have CorelDRAW X4, when I open some file(s), which takes long time to open, even which file size is smaller or bigger.
View 1 Replies View RelatedA few of my design drawings are taking a long time to open from cold. They are not particularly complex drawings and all the files / assembly etc. that are referenced on them are correctly stored and are not corrupt or 'sick'. Why are these drawings taking so long to open? waiting for them is slowing me down considerably.
Product Design Suite Ultimate 2013
64-bit HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I was wondering if anyone knew what is wrong with my smudge tool. When I go to use it and apply it to my image, it takes a while to show the affect. Everything else in my photoshop works fine. Oh yeah, I use PS CS if that makes any difference.
View 3 Replies View Relatedwhen I try to use it now, It basically locks up the whole computer, and takes around 2-3 minutes before it finally pops up with the liquify box.
View 7 Replies View RelatedWhen I use the mirror component, is taking around 15 minutes to finish (3 simple sheet metal)..
View 3 Replies View RelatedHave just developed a major problem. cdr files are taking a ridiculously long time to open,
Running X6.3 64 bit on a Core i7 920@2.67 GHz 12Gb RAM 6TB available disk space, Windows 7 64 bit Ultimate SP1
Existing cdr files are taking up to an hour to load. I've deinstalled and reinstalled, to no avail.
As I flip through pics in the Library Module, the previews often take a while to load. Any way of speeding this process up? I've already tried changing the Catalog Settings, ensured the pixels meet my screen resolution, and chose low quality preview.
View 11 Replies View RelatedI just upgraded my computer by doubleing the RAM to 4Gb. Now CorelDraw (12 on XP SP3) is lagging. Almost every time I switch tools, make a change, zoom in or out, or do anything, it sits there doing squat, totally unresponsive for about a minute (yes, I do my 60 seconds) or more, then suddenly catches up. This is an excedingly frustrating if not outright impossible way to work.
My project is at the stage where yes, I NEED Draw. I need it working. Quickly and effeciently. The way it was before the memmory capacity was Improved.
So since we installed CorelDraw x6 the one file we have been working on is a long text file and it slowes every thing down drasticly.We did think updating would work so we did that and it still lags.
View 4 Replies View RelatedI have CS6 64bit on a reasonably up to date windows 7 system. Just checked for CS6 upgrades 7/14/13, and have the latest version (13.0.1.2).
Things have been working fine since I installed the product about a month ago.
At some point something went wrong and it now takes 30 seconds or more to load a file via "file>open..."
It also takes 30 or more second just for photomerge to display the file dialog from "file>automate>photomerge..."
All other photo s/w I have loads raw files, tifs, jpegs, etc... very quickly. This is CS6 specific.
I disabled loading of plugins, didn't work (CS6 starts quickly enough, just not so much file loading).
I am attempting to hyperlink from my CorelDraw file to a separate PDF. I want the link to work when I export my CorelDraw page to pdf, and I would like to be able to hyperlink to a different pdf file. A quick google search turned up a file:\ syntax to lead with in the hyperlink but I'm having trouble getting it to work.
View 4 Replies View RelatedIs there any way to lock or protect the image and text in a corel draw when you export as cdr, ai or pds. I need to give a document to a photoshop users but I don't want the person to be able to remove or export the image or copyright text line.
View 7 Replies View RelatedAt the bottom of Create a New Document is a box that says Do not show this dialog again. I checked it and now I don't know how to get it back.
View 7 Replies View RelatedI am having trouble with some of the dockers. Some of them when i go to window dockers and click on them come up just fine, but there are a few and don't come up at all. Like Contour or Text Properties.
View 3 Replies View RelatedSo in document color settings in color management, should the primary color mode be RGB or CMYK? I only print inkets and never send stuff out to a regular printer.
should all color settings be at RGB if the option is offered?
Yesterday, suddently when editing text in a document, clicking outside of the text edit, CDR crashes:
Runtime error!
Program: c:Program Fi...
This application has requested the Runtime to terminate it in an
unusual way.
Please contact the application's support team for more information.
I have tried to do the tricks, I googled, like resetting to factory, editing the xml file and running as administrator. Nothing works. It is when I edit any font, and in a new document also. AND update of CDR X4 with service pack 2 did not work.
Got the "Cannot open a blank document" ERROR Message when I went to open a recently created Corel Draw X5 file. Using Windows 7 Professional.First time I've gotten this message.
View 1 Replies View RelatedI have a senior project within CorelDRAW X6 (Student) that spans around 1200 pages spread across about 25 different .CDRs. I need to export all of those pages as .JPEGs so I can manipulate them in another program.
I know that you can batch export using a macro. But I only need exactly what's on the page at the page size. My solution was to crop each page (yes, one by one) and then later do a batch export on all of them. However, when batch exporting to .JPEG, I noticed that I was getting different results than when I had exported pages individually in the past. At first I thought this was a macro issue. But when I was trying various things I realized that anytime I closed a document after cropping it, upon reopen my drop shadows would be gone. And of course, I didn't realize this until I had already cropped all 1200 pages and was doing my batch export. I've tested it and if I crop a document and then batch export the pages before closing the document I can get the results I need. But that would require me to crop all 1200 pages again and my time is running short.
(Ignore the color differences here...I'm fairly certain it's because I didn't pay attention to my color settings on export here) Export before closing via file converter macro:
Export after closing file and then batch exporting via macro:
Any macro for cropping to page size and then exporting to jpeg (or other format) all in one fell swoop? This would hopefully bypass this issue and save me the huge problem of having to crop them all again. I could just open each document and run the macro. In theory, that would be quick.
When I export or publish to pdf from CorelDraw X6 the document size changes.If lets say i export an A4 page and then inport it again the size of the page has changed from 210x297 to 209,903 x 296,686 !
View 4 Replies View RelatedWindows Vista 64, corel crashes on creating new document or opening existing one. It crashes twice actually. First crash spews out this:
Nazwa zdarzenia problemu: APPCRASH Nazwa aplikacji: CorelDRW.exe Wersja aplikacji: 16.0.0.707 Sygnatura czasowa aplikacji: 4f4c60a4 Nazwa modułu z błędem: MSVCR100.dll Wersja modułu z błędem: 10.0.40219.1 Sygnatura czasowa modułu z błędem: 4d5f034a Kod wyjątku: 40000015 Przesunięcie wyjątku: 00000000000761c9 Wersja systemu operacyjnego: 6.0.6002.2.2.0.256.6 Identyfikator ustawień regionalnych: 1045 Dodatkowe informacje 1: e139 Dodatkowe informacje 2: ed2429a1e405cd1a6fea3328235a733b Dodatkowe informacje 3: 08d2 Dodatkowe informacje 4: 7206fe9a4464dcae865f27c5d1766c68
second with this:
Nazwa zdarzenia problemu: APPCRASH Nazwa aplikacji: CorelDRW.exe Wersja aplikacji: 16.0.0.707 Sygnatura czasowa aplikacji: 4f4c60a4 Nazwa modułu z błędem: mfc100u.dll Wersja modułu z błędem: 10.0.40219.1 Sygnatura czasowa modułu z błędem: 4d5f1436 Kod wyjątku: c0000005 Przesunięcie wyjątku: 0000000000001b33 Wersja systemu operacyjnego: 6.0.6002.2.2.0.256.6 Identyfikator ustawień regionalnych: 1045 Dodatkowe informacje 1: 433d Dodatkowe informacje 2: c4f485ce7f6b39f48369e75a4a5c6af7 Dodatkowe informacje 3: f657 Dodatkowe informacje 4: bc294d6383f97effacd7dcb23980b3fe
Both are Visual C++ related as far as I can see. I have all the Visual C++ redistributables installed and up to date.
I saved a book a friend of mine worked on using coreldraw 12 on a cd and tried to open it in X6 but it won't open. I think My sys. Os is a 32 bit, I have a trial version of x6 on this comp. and full version 12 on another. When I ok convert to bitmap Error message says invalid file format.
View 1 Replies View RelatedI got problems with pdf files in corel x3. When I want to save a large document pdf, it become a blank document when I open it with Adobe Reader.
View 3 Replies View RelatedI am Using Coral Draw X3 & when i drag & drop or copy & paste image ( small aswell as big) takes time and in between it gets stuck & not responding message.
View 9 Replies View RelatedIs there any solution, as powerclip is consuming much time to come out of.... and also note that it is having many objects inside the powerclip. It should not act like a normal object, consumes much memory and time
View 3 Replies View RelatedI've been trying to insert new barcodes into a label document on Coral Draw and it comes up with an error message saying “Failed to create object. Make sure the object is entered in system registry”.
View 3 Replies View RelatedI've got a Draw document in RGB.
I added some paragraph text - just dragged a text frame and typed some in. Why is it CMYK?
I made a contour, one step, of a rectangle. Broke it apart. Why is this new rectangle's outline CMYK?
if I create a new document, say A4, and then import a TIFF photo to that document, the photo appears much larger than my background A4 document. So, do I edit my photo and then export it as a TIFF again, or should I resize my background document from A4 to match the size of my photo before exporting? What I'm asking is that I don't want to lose the original size of my TIFF image, so when I export my image will CD save the TIFF image in it's original size or resize it to that of my created A4 document?
View 1 Replies View RelatedI need to make a bunch of barcode tags for a client. I know CorelDraw isn't the best tool for this, but it's what I have and this is a one-time job.
To partially automate the process, I'm trying to use print merge to make the parts of the tags that aren't barcode, but I include the text that belongs in the barcode on the page. The print merge works correctly, I get what I expect. The next step would be to cut the barcode text, choose Insert Barcode, and then paste the barcode text into the barcode dialog.
Except, when trying to paste the text intended for the barcode I discovered that I was actually copying the <var1> field--not the text. I verified this by copying the "text" from the print merge document and then pasting back into the same document--what I got from the paste was not the expected text, but <var1>.
Since the barcode type I was using does not support the "<" character, it gave me an "invalid character" error.
My attempted solution was to publish to a PDF file and then import into a new document. This worked except for some reason CorelDraw makes a new layer named, inexplicably, "Layer 1" (there's a "Layer 1" by default, why make a second layer with the same name?) BUT when the import is done the new layer is NOT chosen in Object Manager, the original "Layer 1" is. Which means, when I go to copy the text and insert the barcode it ends up UNDER the other parts of the barcode tag which are on the NEW "Layer 1".
