CorelDRAW X4 :: Cutting Lines When Publish To PDF
Sep 29, 2011
Screenshot PDF Problem.jpg
When I publish something to PDF (in order to send it to a professional presser) the cutting lines are set on the 'bleed edge' instead of excluding the neccesary bleed margin of 3mm. In other words I am not able to provide any PDF document with a bleed margin which is (obviously) very frustrating for the pressing company as well as for me.
- In Publish to PDF > Settings > Pre-press I checked the cutting-line box ( I work with a dutch version so excuse me if the the right translations aren't used. Check attached file for the settings).
- When I check the box 'Aflopen' (just above the cutting line box) the PDF file turns out white.
View 14 Replies
ADVERTISEMENT
Feb 8, 2013
Trim tool errors when cutting lines with lines CorelDraw X6
View 1 Replies
View Related
May 12, 2011
A customer sent me a jpeg of a white dove that they want printed on vinyl and then contour cut to put on their travel trailer. The picture was a very low dpi and I scanned it and increased the dpi to 150. I tried to trace it, but it just would not come out right.
My question is -- Can I put cutting lines around the dove as a bitmap and then be able to print and contour cut it out?
View 1 Replies
View Related
Aug 1, 2011
I have downloaded an eps file, which I need to cut. I use a graphtec ce5000-60 cutter, and a plugin called cutting master 2 in order to use coreldraw.
when i select application launcher and choose cut / plot, it opens cutting master. when i do this, it only shows the 2 outer lines of the logo i need to cut. I have attached a screenshot so you can see exactly what I mean. I have tried lots of things to recitfy this, but as a complete beginner with this software, I really dont have a clue.
View 8 Replies
View Related
Dec 14, 2011
I am constructing a pipe (made up by sections) in Inventor. The pipe is going to be manufactured by cutting pieces of metal in a flow jet, roll them, and eventually weld them together.
I was wondering if it is possible to "unfold" the pipe sections to the plane, so I easily can see the cutting lines for the flowjet?
View 1 Replies
View Related
May 4, 2012
when I am working on a large drawing and/or pasting as a block, all the grey lines (colour 8) turn to white. When I select a grey line, it flicks back to grey, but de-select, and it's white again.
If I toggle on hardware acceleration, the problem is fixed for a short while, and also if I turn it off, it is fixed for a short while, and also if I save, close and re-open it's good untill I paste a block....
I suspect it may be because of my setup and an un tested graphics card:
Windows 7 64 bit Ultimate - running through bootcamp on a macbook pro
Autocad 2012 Lt
Machine Configuration
---------------------
Processor Speed : 2.2 GHz
RAM : 8103 MB
3D Device
---------
Name : AMD Radeon HD 6750M
Manufacturer : AMD
Chip set : Radeon HD 6750M
Memory : 707 MB
Driver : 8.17.0010.1063
Your machine contains a 3D Device that is not certified.
View 1 Replies
View Related
Jun 9, 2012
How to maybe trace the contour of one object (font) to close the lines of another object to allow it to process in Cut Studio for a Roland GX-24? Basically there's a volleyball and on a corner of the ball the font will overlap but because there are so many intersecting lines, having the cutter make the cuts would be impossible.
I did "contour" the font but the lines inside the volleyball image are not "closed" and I want it to follow the text shape to ensure uniformity instead of me trying to close every node manually.
View 2 Replies
View Related
Jun 2, 2012
I have with transferring graphics between programs - that is graphics that have been "cut out" from their backgrounds. ie with transparent backgrounds.
Whenever I cut and paste out of Draw (or PP) into another program, say Serif PhotoPlus or Xara Designer, the background returns (white), and the same happens when I paste an image into Draw that has been cut out elsewhere. To all extent and purposes they become jpegs.
Yet an image "cut out" in Serif PhotoPlus can be pasted into Xara Designer with the transparency intact. It doesn't work in reverse though.
Is there a setting somewhere that would enable me to successfully transfer images out of and into Draw with transparency? Without having to export every time to png or pdf.
View 8 Replies
View Related
Dec 20, 2011
I use CorelDraw X5. I am a novice trying to export a business card (and other work like advertisements) to JPG or PNG. When I try to export, all the edges are cut off. For example, my business card is 3.5 x 2. When I export to JPG or PNG, the export screen with the custom settings under "transformation" has my work at 3.06 x 1.75. If I try to change this to 3.5 x 2, it still does not return to the original.
View 2 Replies
View Related
Jul 13, 2012
Cutting & pasting small lines of text within CDR x6 and it was crashing out, I discovered that after copying the lines of text, if I waited a few seconds before pasting (text was 3 words 25 characters) the there was no programme crash.
On a related issue when copying some lines of text to another small software application I encountered a Windows error report that I have never seen before "Operation Clipboard Failed" and the error information is listed below which may be of interest to our friends at Coreldraw .....
Exception class: EOleSysErrorException address: 004C5C85------------------------------------------------------------------------------System : Windows XP Professional, Version: 5.1, Build: A28, "Service Pack 3"Processor: AMD, AMD Athlon(tm) 64 Processor 3200+, 2000 MHz MMXex SSE2 3DNow!ex 64 bits DEPMemory: 2047; free 1066Display : 1920x1200 pixels, 32 bpp------------------------------------------------------------------------------List of loaded modules:[00400000] C:Program FilesKing StairsJot+ NotesJotPlus3.exe 3.6.0.619 - 3.6.0.619 Jot+ Notes[017A0000] C:WINDOWSsystem32xpsp2res.dll<00010000> 5.1.2600.5512 - 5.1.2600.5512 (xpsp.080413-2113) Service Pack 2 Messages[01CC0000] C:WINDOWSsystem32msls31.dll<00400000> 3.10.349.0 - 3.10.349.0 Microsoft Line Services library file[10000000] C:Program FilesKing StairsJot+ Noteskszlib.dll 1.2.3.0 - 1.2.3.0 zlib data compression library[20CB0000] C:Program FilesCheckPointAForceFieldPluginsISWSHEX.dll 1.5.380.0 - 1, 5, 380, 0 ZoneAlarm Browser Security[42640000] C:WINDOWSSystem32spoolDRIVERSW32X863pscript5.dll 0.3.6000.16386 - 6.0.6000.16386 (vista_rtm.061101-2205) PostScript Printer Driver[5AD70000] C:WINDOWSsystem32UxTheme.dll 6.0.2900.5512 -
[code]....
View 3 Replies
View Related
Aug 29, 2011
Curve 2.jpg
After I cut a three-point curve through the middle the curviest part becomes really fat (see attached photo). I have not found options to tackle this problem. I just want to draw that half curve.
Another problem is: When I enlarge figures the wideness of the lines enlarge also. What is this? 0,3 mm wide = 0.3 mm wide. If after enlarging I try to paste the different figures together one figure has a fatter line than another, while the figures both indicate to be 0.3 mm wide. I cannot make the fat line thin enough because there is a limit in which you can make the lines thin.
I only want to draw an ascending sinus (growing amplitude) in a mathematical looking way.
View 22 Replies
View Related
Jun 7, 2013
I use CorelDraw Windows 7. Everything was fine for 2 days. Now, you can not publish to PDF from. We use CorelDraw for 3 years at the PDF edition for my work. Now the pdf is empty by opening acrobat and zoom is set to 5603%. I get this error when I try to change zoom to 100% "document (14)."
View 14 Replies
View Related
Nov 29, 2012
I have a multi page document that contains links to various large tiffs. The filesize of cdr is decent to work with and it preserves them until I publish it to pdf .
Any changes made to document after this operation will increase the document file (at the next save) like the images are embedded , not linked. However, in the links panel still show up as links, but properties of images mention their full resolution instead of a thumbnail size, and working space enhanced view show that.
I tried for test with one page and only one image and confirmed this behaviour.I couldn't find any solution to this and I keep closing the document after publishing and open it again for changes.
View 1 Replies
View Related
Nov 7, 2011
When I use the Publish to PDF, it either creates a PDF file that is corrupt, or Corel itself crashes (Windows 7 64) give me a "this program has stopped working" error.
I tried uninstalling / reinstalling but it still does the same thing.
View 5 Replies
View Related
Dec 28, 2008
I'm using CorelDraw X4 on a Windows Vista Home Basic System. Trying to "Publish to PDF" produces empty PDF Files, with a page size of 0 mm x 0 mm. The original File has a layout of (German) A4 and a textbox with "Test".
There are no error messages.Even using a PDF Printer (FreePDF XP) doesn't produce a file, but gaves the error message
"%%[ Error: undefined; OffendingCommand: -0,15789 ]%%GhostScript Error 1. Error, no PDF file produced! (False)".
View 14 Replies
View Related
Aug 7, 2012
I am a musician doing the CD cover of my band's 3rd CD.
On the CD back I have images, text and the usual barcode. How can I publich to pdf from X5 so my images keep CMYK and my barcodes keep Black & White? My CD label gave this comment after the pdf I sent them:
"I think you do not understand that the barcodes and codes in general HAVE TO BE IN BLACK/WHITE. You cannot just integrate it in the 4 colour artwork as if it is a picture."
I use X5 upgraded directly to SP3 and PDF file shows Corel PDF engine version:15.2.0.686
View 13 Replies
View Related
Aug 16, 2013
I am attempting to publish a pdf of a booklet I've been working on. It is currently set up with facing pages.
I want to publish it as a pdf, but so that it maintains the booklet format. That is, when it opens as a pdf, one should see both left and right hand pages, as one would browsing through a regular book.
How does one do this with Corel? I know once one has published, one can open the pdf and change the view setting to 'two page display.' I want this to happen automatically when the viewer opens the document though.
View 4 Replies
View Related
Sep 26, 2012
i have a problem with corel draw x4.
So: i create a document and publish it as a pdf. That works.
But when i open the pdf with acrobat the document is empty. Just a white paper.
View 14 Replies
View Related
Oct 24, 2011
I am working in CorelDraw X3 and when I publish to PDF they are coming out blank? I have made many before and they are fine, I know to position it in the page, but still nothing? I am using Windows 7? By doing it through the 'prepare to bureau service' they work fine except the file size is massive?
View 3 Replies
View Related
Feb 10, 2012
I am using Corel X5 in Windows 7 OS having 4GB RAM with Intel Core i3 processor. When I converting cdr file to PDF with prepress PDF preset will resulted a crashed PDF file. But with 'web' PDF preset may results fine. But the resolution goes high or custom , output is a crashed file.
View 7 Replies
View Related
Apr 21, 2011
My CorelDraw suddenly stopped to produce PDFs. The dialog "Publish To PDF" opens fine, but when pressing "Save" it won't do anything after a while of loading. Usually it starts to process the file and a progress bar is shown, but no such is shown and no file is produced. The settings opens fine and no problems there.
Re-installing has been tried without resolving the issue. Different files has been tried, same problem.
View 9 Replies
View Related
Aug 2, 2012
Is there a way to cut a solid into two pieces using a non-planar cutting plane? I have been tasked with calculating the volume of concrete damage in a chute block. I have a sketch of the damage on the chute block. I created the chute block as a solid and then drew the damaged area extents using plines. This created non-planar plines. Is there a way to get this to work that will allow me to see the volume of the concrete damage? I need an easy way to do this, there are 50 chute blocks all the same size but with varying degrees of damage
View 1 Replies
View Related
Dec 3, 2013
I have a problem with cutting the design, it actually prints it but not cut it. The error displays : Cut Data File Creation Error..
I'm using Corel Draw Graphics Suite X6, Raster Link, to print & cut using Mimaki CJV30-60..
What does the error actually mean & what do I need to do to resolve this?
View 2 Replies
View Related
Nov 26, 2011
Im trying to cut out the centre of the letter R below. Normally I break curve apart, select the centre, and trim it from the outer. I can then select the centre piece and remove it. As you can see, this has worked with the letters P & O. When I do it with the R it seems to have worked, to the point where I can even select the centre and remove it, but when I put it back over a coloured background, it is still white.
View 8 Replies
View Related
May 5, 2011
I have a design that I would like to cut in half so that I can cut half of it at at time on my vinyl cutter. I can't think of way to do it in Corel.
View 5 Replies
View Related
Nov 26, 2011
I just recently purchased a new computer and installed all my software. When I'm in corel draw and click on the icon to send to my plotter/cutter, the cutting Master 2 plug-in opens behind corel draw. It always opened in front of my corel screen on my older pc. how to get it to open in front of corel?
View 2 Replies
View Related
Aug 1, 2011
Im new to both coreldraw, and to the graphtec cutter, so my problem may have a very simple answer. Ive been playing around with it, learning how things work. Smaller images are no problem, but Im having trouble cutting larger images.
the plotter can cut up to a width of 610mm, and Im using 610mm vinyl. I need to cut some items that are 600mm wide. First time I tried, it left a gap on the left side of approx 50mm. It also stopped cutting approximately 20mm from the right side. next time, I loaded the vinyl into the machine 45mm further right and tried again. this time the left hand edge was positioned where I expected, but the right side still stopped in the same place as previously, leaving a gap of around 70mm on the right hand side. you would think I was trying to cut something bigger than the capacity of the cutter, but obviously this isnt the case.
if I have missed any necessary information etc, Im very new to all of this.
View 7 Replies
View Related
Apr 2, 2013
when I use publish to pdf with bitmap downsample image in cdr file deleted in pdf file. I am using Coreldraw X6 and another problem is that I have checked preserve pure black in color management. but i noticed that r0b0g0 in rgb bitmap also converted into Black100.
View 5 Replies
View Related
Dec 10, 2013
I regularly design multi-page design drawings for sign manufacturing, and was operating normally in X3 on a Dell Dual Core up to yesterday, when suddenly app won't successfully publish to PDF. It just spins, or produces a file that has blank pages or some huge empty file that shows it to be over 150MB in size (normally my files are under 8 MB). I tried a complete uninstall/reinstall of program twice now, but only to have same results.
View 5 Replies
View Related
Jun 14, 2012
I am making a Blurb photo book in CDx4. Everything goes very well. But then I try to publish the result to pdf/x3, as requested by Blurb. The colors of the bitmaps are wrong, dull. I try to publish to acrobat 4. Everything is all right. Other pdf formats seem to do very good as well.
I think it has something to do with rgb and cmyk, but whatever I try to change, it does not work. I converted the bitmaps to cmyk, I changed things in the color management (had things with that in the past -> color management off seems the best), nothing works.
View 4 Replies
View Related
Jul 4, 2011
I have a Roland SP54 with VersaWorks.
I design everything in CorelDraw and want to know how one goes about doing a color separation for cutting just the vinyl,
E.g. I have a 3 color design that I need to cut 3 different color sheets of vinyl. How do I go about setting up to cut?
View 10 Replies
View Related
