CorelDRAW X6 :: Trim Tool Errors When Cutting Lines With Lines
Feb 8, 2013Trim tool errors when cutting lines with lines CorelDraw X6
View 1 Replies
ADVERTISEMENT
CorelDRAW X4 :: Cutting Lines When Publish To PDF
Sep 29, 2011Screenshot PDF Problem.jpg
When I publish something to PDF (in order to send it to a professional presser) the cutting lines are set on the 'bleed edge' instead of excluding the neccesary bleed margin of 3mm. In other words I am not able to provide any PDF document with a bleed margin which is (obviously) very frustrating for the pressing company as well as for me.
- In Publish to PDF > Settings > Pre-press I checked the cutting-line box ( I work with a dutch version so excuse me if the the right translations aren't used. Check attached file for the settings).
- When I check the box 'Aflopen' (just above the cutting line box) the PDF file turns out white.
CorelDRAW Graphics Suite X4 :: Cutting Lines For JPEG
May 12, 2011A customer sent me a jpeg of a white dove that they want printed on vinyl and then contour cut to put on their travel trailer. The picture was a very low dpi and I scanned it and increased the dpi to 150. I tried to trace it, but it just would not come out right.
My question is -- Can I put cutting lines around the dove as a bitmap and then be able to print and contour cut it out?
Photoshop :: How To Convert Paintbrush Lines To Pen Tool Lines?
Aug 27, 2006I use "Illustrator CS"
I painted a picture using "Paintbrush Tool".
(Bezier lines )
Is it possible to convert it to Bezier lines drawn by
"Pen Tool"?
CorelDRAW X3 :: Tool For Smoothing Vector Lines Only?
Oct 27, 2007A quote from an illy user "the biggest thing that ILLY does that COREL does not appear to do , is have the SMOOTH TOOL and I use this ALLLLLL the time. ....you can simply stroke, stroke, stroke away with your pen, with one touch of the keyboard for beautiful smooth vector lines." Does Corel have one tool for smoothing vector lines only?
View 7 Replies View RelatedAutoCAD 2013 :: Trim Lines
May 22, 2013The yellowcurve is created by progect geometry of red circle on a solid(I delete solid after that).and there are some lines on circle and parallel to projection vector. now I,m going to trim or extend these lines by yellow curve. trim and extend don,t work and there is no intersection point between blue lines and yellow cure . What should I do?
View 4 Replies View RelatedIllustrator :: How To Trim Off Top Of The Lines In Picture
May 9, 2013I want to trim off the top of the lines in the picture below. I used white lines to cover the top to show you what look I wanted to achieve, However, I know that using white lines to cover it up is not a practical solution for my application. I know that I should be messing with the pathfinder tool but I just can't get it to work right for me. I am pretty new to illustrator and Photoshop.
View 2 Replies View RelatedCorelDRAW X6 :: Rectangle Tool - Delete One Or More Of Four Sides / Lines?
Apr 15, 2013After drawing a rectangle with the rectangle tool. how do I delete one or more of the four sides/lines?
View 1 Replies View RelatedAutoCad 3D :: Put Drawing From 3D To 2D To Trim Some Parts Of Lines
Mar 19, 2012I have a drawing of tower in 3d, i want to put all the drawing in 2d only so that i can trim some part of the lines, is it possible to put the 3d in 2d in one level only, i mean one axis.
View 9 Replies View RelatedAutoCad :: How To Trim Unwanted Contour Lines
Jan 29, 2012I have a drawing from a surveyor showing contours which have been formed by 2D polylines. I have tried to trim out a portion of the contours, which i don't need, using extrim command but it doesn't trim any of the contour lines. Even with just the trim command i cannot trim them. i have tied exploding but still not managed to trim. How to trim these unwanted contour lines ?
View 5 Replies View RelatedAutoCad 3D :: How To Trim Unwanted Lines In A Solid
Oct 25, 2012If you have a solid a there are inner lines you want to trim how do you do that in autocad 2013.
View 9 Replies View RelatedIllustrator :: How To Trim 2 Lines Together To Make A Corner
Sep 6, 2009I'm trying to learn illustrator cs2 on my own and am having some issues with a few basic functions. I am drawing shapes using the rectangle, ellipses and trying to join them together. How do i trim 2 lines together to make a corner. I would like to cut off the exess at the ends by cutting to the other lines. I know this seems basic but I can't figure it out. In the end I want to make a figure using all the drawing tools ( pen, line, shapes etc) and have the outline just one feature.
View 8 Replies View RelatedPhotoshop :: Make Straight Lines? Horizontal Lines? Vertical Lines? Curves?
Aug 17, 2003how do I make straight lines? Horizontal Lines? Vertical Lines? Curvs? I read many tutorials and i am afraid that I am doing it the wrong way, my way is to drag a guide to where i want the line to be at and trace the guide with the brush tool...
View 2 Replies View RelatedAutoCAD 2013 :: Trim Command Skipping Lines?
Oct 1, 2013When I initiate the trim command with a double enter (i.e. select all mode), I usually first zoom into the area I want to trim so I see no other objects, then start the trim <Enter><Enter> option, then pick the lines I want to trim. Even if these extend off the screen and cross other objects (not seen on the screen), they usually trim off completely. However, on occassion they don't. To replicate the problem try this:
Draw 2 vertical lines and 2 horizontal intersecting (like noughts and crosses)Draw a horizontal line that intersects both vertical lines but up near the top of those linesZoom in so you only see the square and extending lines (but not the short horizontal line)Trim <Enter> <Enter> and pick from bottom right to top left (i.e. around the squareZoom out.
The square is trimmed, however there are 2 line fragments left above the horizontal short line.
Fix: UndoTrim the same way and presto, it now works I found if I then moved the line above (so only a small amount), zoomed in again, tried to trim - same error.
AutoCAD Architecture :: Trim Lines Of Apparent Intersection?
Jul 3, 2012I'm using ACA 2008 and used to be able to pick two lines that didn't physically cross each other and use the trim command to trim them based on where they would cross if they extended to each other. But it doesn't seem to do it anymore.
Best way I can describe it is it used to trim at the apparent interest ion of where they would come together. I'm sure there's some easy fix to this, just don't know where it's at.
AutoCAD 2013 :: How To Trim Circle Segment Between 2 Red Lines
Oct 13, 2012I posted a file drawing of a basic symbol.....how do i trim the circle segment between the 2 red lines?
I have drawn this symbol in space....should i be anchoring it to the 0,0 co-ordinates?
AutoCAD Architecture :: Trim Command Skipping Lines
Mar 11, 2013We recently upgraded to Autocad Architecture 2013 and the trim command is driving me mental. Lets say I have a window mullion pattern with 4 intersecting lines and I want to trim out the center. (see attached example) I start the trim command, then right to left window to select the 4 lines, then use another right to left selection window to trim out the lines. It always leaves on of the lines leaving me to have to click one more time. This is a huge pain when you have to do this multiple times. That is a lot of extra clicks. What gives? I never had this issue before.
View 5 Replies View RelatedAutoCad 3D :: Trim Lines Of Figure1 Which Are Shown In Red Color In Figure2?
Nov 6, 2012I have drawn figure1 with rectangle and press/pull command. I have drawn figure2 with line command. I want to trim the lines of figure1 which are shown in red color in figure2.How to do this?
View 4 Replies View RelatedAutoCAD 2013 :: Lines Not Connecting - Trim And Facet Tools
Jul 12, 2013I am having trouble with my lines connecting...have tried adjusting the line effects, edge mode, jitter, line extension...but Trim and Facet are not working with certain lines not connecting or not trimming. I attached my dwg file.
View 2 Replies View RelatedAutoCAD Inventor :: Unfolding A Pipe To Find Cutting Lines
Dec 14, 2011I am constructing a pipe (made up by sections) in Inventor. The pipe is going to be manufactured by cutting pieces of metal in a flow jet, roll them, and eventually weld them together.
I was wondering if it is possible to "unfold" the pipe sections to the plane, so I easily can see the cutting lines for the flowjet?
AutoCAD 2010 :: Grey Lines Flick White When Working In Large Dwg / Cutting And Pasting As Block?
May 4, 2012when I am working on a large drawing and/or pasting as a block, all the grey lines (colour 8) turn to white. When I select a grey line, it flicks back to grey, but de-select, and it's white again.
If I toggle on hardware acceleration, the problem is fixed for a short while, and also if I turn it off, it is fixed for a short while, and also if I save, close and re-open it's good untill I paste a block....
I suspect it may be because of my setup and an un tested graphics card:
Windows 7 64 bit Ultimate - running through bootcamp on a macbook pro
Autocad 2012 Lt
Machine Configuration
---------------------
Processor Speed : 2.2 GHz
RAM : 8103 MB
3D Device
---------
Name : AMD Radeon HD 6750M
Manufacturer : AMD
Chip set : Radeon HD 6750M
Memory : 707 MB
Driver : 8.17.0010.1063
Your machine contains a 3D Device that is not certified.
AutoCad 3D :: 2D Circle Jagged Lines - 3D Model Hidden Jagged Lines / How To Get Smooth Lines
Oct 5, 2012Re: 2D circle jagged lines, 3D model hidden jagged lines. How do i get smooth lines?
How do i get rid of jagged lines?
Circles and diagonal lines look rubbish when i am in hidden view which i use for simple 3d black / white (i think this is the best way?).
I have tried:
- viewres (1000, 5000, 10000, 20000 sightly better)
- regen
See examples.
square with jagged lines.fw.pngcircle with fuzzy outline.fw.png
CorelDRAW X4 :: Use TRIM Tool On Top Of Vector Doesn't Work
Jun 11, 2011Half the time I use TRIM tool vector on top of vector it doesn't work.
I can't seem to figure out why in some cases trim works and in others it simply puts the top object under the bottom one instead of trimming it from the bottom one.
Does same thing in X3 X4 and X5?
I've tried everything from making sure both were filled with solid color - all curves closed, nothing else grouped with them - nothing - sometimes I have to try a couple times doing same thing and it will work, other times not at all - even after trying a save (which sometimes works)
Both top and bottom show on layer one in properties too!
Photoshop :: How To Show Lines? [Line Tool - Pencil Tool]
Feb 4, 2008Is there a way to make it so when you're drawing a line you can see how it actually will look like?
On paint it shows exactly how the line looks as ur drawing it,
but on Photoshop it shows some rectangle outline of the line.
Illustrator :: Why Can't Use Width Tool On Lines Drew With Paintbrush Tool
Mar 13, 2014I have drawn a shape using the Paintbrush tool's new smooth fidelity with a 3 pt stroke. But when I go to use the Varible Width tool it want allow me to modify the line.
View 2 Replies View RelatedAutoCad 2D :: Trim Line Using A Circle As Cutting Edge
Mar 21, 2013I am having some trouble trimming a line using a circle as my cutting edge,the line falls short of the circle,I have tried changing EDGEMODE and still the problem persists!
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Intersect Between Two Lines Using Start And End Values Of Two Lines
Oct 11, 2013With all of you fine teachers, I have the know-how to get the start and end values of a line.
Do you think there is a way to get a point returned that represents the true intersection of the two lines, without having to involke a user defined "getpoint" function using "intersect" osnap?
AutoCad :: Hidden Lines Viewbase Option To Shaded With Visible Lines Mode?
Oct 11, 2012Why I can't set the hidden lines viewbase option to shaded with visible lines mode?
View 9 Replies View RelatedAutoCAD 2010 :: Plotting Lines Using Compass Direction For Lines Angle
Apr 25, 2012i am doing a simple project making a survey plot for a piece of land that will be broken into subdivision. all measurements are of my starting point. after plotting the starting point i try to draw line that is 113 feet long and at a bearing of N 5d W i have no problem entering this data but when i hit enter it draws a straight line. now i know 5 degrees is much of an angle so i thought maybe it just looked straight and tried to plot the next point which was 542 feet from the last point at a bearing of N 39d E but once again after i put the info in and hit enter or space it would plot a line of the proper length but vertical, not the proper angle i need it at. here is how i would put in the info:
first i choose the lne command and choose my "beginning point" as that starting point for my line then i type 113<N 5d W for the length and direction and hit enter. when i do this it plots a vertical line of the proper length but wrong angle. what am i doing wrong? i have ortho set to off and idk what else to mess with
Revit :: Convert Detail Lines To Non Plotting Reference Lines Or Planes?
Jan 18, 2014How do I convert Detail Lines to non-plotting Reference Lines or Reference Planes? (or to a reference line that would not plot in the future?).
View 2 Replies View RelatedAutoCAD 2010 :: Wipeout To Turn Continuous Lines Into Dotted Lines?
Apr 23, 2012I was trying for an option with wipeout mask.
Is there any option with wipeout to turn the continuous lines into dotted lines instead of hiding the object? I have been working on one staircase block, i want to show half block as a dotted lines.. is there any way to do that without going in to the block edit and change? thats why am looking for wipeout mask option.