I have drawn figure1 with rectangle and press/pull command. I have drawn figure2 with line command. I want to trim the lines of figure1 which are shown in red color in figure2.How to do this?
View 4 Replies
Trim tool errors when cutting lines with lines CorelDraw X6
View 1 Replies View RelatedThe yellowcurve is created by progect geometry of red circle on a solid(I delete solid after that).and there are some lines on circle and parallel to projection vector. now I,m going to trim or extend these lines by yellow curve. trim and extend don,t work and there is no intersection point between blue lines and yellow cure . What should I do?
View 4 Replies View RelatedI have a drawing of tower in 3d, i want to put all the drawing in 2d only so that i can trim some part of the lines, is it possible to put the 3d in 2d in one level only, i mean one axis.
View 9 Replies View RelatedI have a drawing from a surveyor showing contours which have been formed by 2D polylines. I have tried to trim out a portion of the contours, which i don't need, using extrim command but it doesn't trim any of the contour lines. Even with just the trim command i cannot trim them. i have tied exploding but still not managed to trim. How to trim these unwanted contour lines ?
View 5 Replies View RelatedIf you have a solid a there are inner lines you want to trim how do you do that in autocad 2013.
View 9 Replies View Relateddashed lines are showing as continuous in both model and paperspace the property tab shows the linetype as by layer when i click on the line and under the layers proper manager the linetype for the layer says dashed
View 9 Replies View RelatedI'm almost finish tracing my image in AutoCAD but suddenly the lines are not showing on top of the image. But it is at the back of the image.
View 2 Replies View RelatedI am currently using the visual style "Wireframe" and cannot seem to figure out why my lines won't plot out as dashed lines even though they are dashed in my layout. I have been playing around with my LTSCALE,PSLTSCALE but nothing seems to be working.
Current Visual Style Setting (WireFrame):
Edge Settings: Facet Edges
Occluded Edges: Yes
Linetypeashed
Intersection:Yes
Silhouette Edges:Yes
When I initiate the trim command with a double enter (i.e. select all mode), I usually first zoom into the area I want to trim so I see no other objects, then start the trim <Enter><Enter> option, then pick the lines I want to trim. Even if these extend off the screen and cross other objects (not seen on the screen), they usually trim off completely. However, on occassion they don't. To replicate the problem try this:
Draw 2 vertical lines and 2 horizontal intersecting (like noughts and crosses)Draw a horizontal line that intersects both vertical lines but up near the top of those linesZoom in so you only see the square and extending lines (but not the short horizontal line)Trim <Enter> <Enter> and pick from bottom right to top left (i.e. around the squareZoom out.
The square is trimmed, however there are 2 line fragments left above the horizontal short line.
Fix: UndoTrim the same way and presto, it now works I found if I then moved the line above (so only a small amount), zoomed in again, tried to trim - same error.
I'm using ACA 2008 and used to be able to pick two lines that didn't physically cross each other and use the trim command to trim them based on where they would cross if they extended to each other. But it doesn't seem to do it anymore.
Best way I can describe it is it used to trim at the apparent interest ion of where they would come together. I'm sure there's some easy fix to this, just don't know where it's at.
I posted a file drawing of a basic symbol.....how do i trim the circle segment between the 2 red lines?
I have drawn this symbol in space....should i be anchoring it to the 0,0 co-ordinates?
We recently upgraded to Autocad Architecture 2013 and the trim command is driving me mental. Lets say I have a window mullion pattern with 4 intersecting lines and I want to trim out the center. (see attached example) I start the trim command, then right to left window to select the 4 lines, then use another right to left selection window to trim out the lines. It always leaves on of the lines leaving me to have to click one more time. This is a huge pain when you have to do this multiple times. That is a lot of extra clicks. What gives? I never had this issue before.
View 5 Replies View RelatedThe attached file shows a gear tooth profile that I need to sweep along the lines shown. The problem is those lines are not all parallel to the UCS The tooth profile is a region.
Is there a workaround to make this happen? I used to do this all the time in 2008.
I couldn't attach the file 'cause it wss too big so I saved it as a PDF but now I can't attach that because it is not a DWG
How do I attach a PDF?
I am having trouble with my lines connecting...have tried adjusting the line effects, edge mode, jitter, line extension...but Trim and Facet are not working with certain lines not connecting or not trimming. I attached my dwg file.
View 2 Replies View RelatedI want to trim off the top of the lines in the picture below. I used white lines to cover the top to show you what look I wanted to achieve, However, I know that using white lines to cover it up is not a practical solution for my application. I know that I should be messing with the pathfinder tool but I just can't get it to work right for me. I am pretty new to illustrator and Photoshop.
View 2 Replies View RelatedI'm trying to learn illustrator cs2 on my own and am having some issues with a few basic functions. I am drawing shapes using the rectangle, ellipses and trying to join them together. How do i trim 2 lines together to make a corner. I would like to cut off the exess at the ends by cutting to the other lines. I know this seems basic but I can't figure it out. In the end I want to make a figure using all the drawing tools ( pen, line, shapes etc) and have the outline just one feature.
View 8 Replies View RelatedI need to create an illustration with only a certain amount of colors. I cleared out everything from my swatches palette and asked it to "add used colors." A color keeps popping up when I do this that I can't find in the actual illustration! But it must be somewhere. Is there a way to search for that color... so I can see where it is? I've tried selecting every piece of artwork, checking it, then locking it... but I'm not finding it.
I'm using CS4 on a Mac.
I'm exporting to PDF from DP7 using the commercial print settings. There is one layer of text on top of another of color bars. Where the edge of the top layer of text ends there is a step made in the color bars that shouldn't be there (see attached). I tried grouping first but the step is worse.
View 8 Replies View Relatedi am looking for a lisp routine which can change all lines in color yellow ( in different layers) to color 8.
View 9 Replies View RelatedIf you take blend tool to gate one color to other or same or gray scale it give correct result. But if you use New color style and new gradient it show wrong effect in CMYK.
View 6 Replies View Related[URL]........
When i opened my ai file into ps, it converted the lines into pixels, how do i maintain the vector lines as shown in the link above?
Also, how do i color underneath those lines?
Using autoCAD 2009, having problems with my line changing to a lighter color, when I draw a line going horizontal it would be the color of the layer I put it in, when I draw a vertical line, the lines turns lighter, for example using color 31, horizontal it's the color I assigned it when vertical it turns white, red does the same thing except for when vertical it is pinkish, how do I get it back to be the same horizontal or vertical?
View 1 Replies View RelatedI work with ground floor plans and what kind of color I should use for the blocks and lines.
For example:
Today, i try to keep this kind of lines, but I saw other drawings with different colors and I wondered if I doing this correctly?
I list below my layer colors:
- new equipment = green or blue or pink;
- existent equipments = gray lines;
- existent walls = gray or white lines
- new building walls = red lines;
- demolished walls = yellow lines.
I have an XREF that I want the lines to appear has color 253.
I go into layer properties and override the layer colors to 253. Some of the lines in the XREF change to 253. Other lines don't because they are not "By Layer" in the xref file.
Is there a setting in autocad that will override these lines that are not "by-layer"?
How do I make my corridor feature lines to change color? I want daylight cut to be red and daylight fill to be green.I've checked under "Toolspace/Settings/General/Multipurpose styles/Feature line styles/Corridor daylight line - Cut" but it doesn't work.
View 4 Replies View RelatedI'm new to Map 3D and not to Civil 3D. I connected to a roads and streams shp file from a ArcGIS directory. Everything came in great and I even was able to get everything named all at once from the attibute directory. The problem is that the features seem to only plot in the colors that I see them as. If I change them all to black, then I see can't see them at all. I have been spening the past 3 hours trying to get them to jus plot black. We also have to stick with stb plot styles in our department.
View 3 Replies View RelatedIs there a way to have the lines in drawing views be the same as the part colors instead of black (like MDT used to do)? Not rendered, 2d lines.
Also, when exporting to .dwg part color lines & the parts as blocks would be great. Ok, maybe I'm asking too much.
2013 IV Pro, SP 1.1
Win 7 Pro
I am using the default styles that came with C3D 2011. How can I change the colors of the corridor "frequency" lines. The lines I am referring to are those that are from the last sub assembly to the daylight line. This is prior to making any section views or surfaces. The colors have to be determined somewhere within the corridor styles I think, but I can't find where.
View 1 Replies View RelatedAfter "copyclip" command -no matter you use ctrl+c or type into the command line- color of all lines inside "Layer 0" with By Layer color property change to White. Other layers and color remains the same. If I change color property of "Layer 0" form "By Layer" to a specific color such as red, yellow they are also remain the same.
I am using Autocad 2009 64 bit.
I have few text labels and lines in a drawing that supposed to have black color.
However, color at some point changed to grey.
Color- by layer, transparency- by layer, viewstyle- 2D Wireframe...
The thing is if I double click on a text it turns to black but after regenall it turns to grey again!
Already did restart and everything. Looks like there is maybe some variable for color control, I don't know.
