I'm exporting to PDF from DP7 using the commercial print settings. There is one layer of text on top of another of color bars. Where the edge of the top layer of text ends there is a step made in the color bars that shouldn't be there (see attached). I tried grouping first but the step is worse.
View 8 RepliesI created 2 new control bars. Each is 2 icons wide (double column). When I drag these new bars to anchor then on the left edge they snap to a single column and I can't get them to stay 2 columns wide.
View 9 Replies View RelatedI've created various snapshots of a series of photos and I'm ready to export. Is there a way to export all the snapshots at once, in a single export step? Up to now, I've been doing this step by step, exporting one version of the image, than going to the next snapshot and exporting again.
View 3 Replies View RelatedI am facing the following problems while working on the navigation bars.
a) I am not able to create a new on of my own, I have to again and again drag and drift a navigation bar from the Designers Gallery, and right click and more buttons to it . What If I want to create a button of my own design ???
b) Even after selecting the navigation bar, I am not able to change the colour of the background as well as the text, am not able to change the font size of the text, the font type am also not able to change, even If I go the the menu style tab of the navigation properties tab. How do I change these specifications ?
The example I use in this question has already been solved by friendly posters here and this is not a rehash... just using the materials at hand to illustrate the point.The effort here was to remove the trailing shadows shown in the first image (at the included URL below).
In that thread 2 posters showed how to do this using a completely different approach.That is, using Arrange/Apply ClipView..However, I used the help manual to try to do this, at a section headed Combining Shapes
When subtracting, intersecting and slicing, you can either use the topmost selected shape to do the "cutting" of the lower shapes, or you can use a mask.To use a mask to cut shapes, first select the shapes and then turn on mask mode. All objects except for the selected shapes disappear while mask mode is on.
Then draw your cutting shape using the main drawing tools (Freehand Tool, Shape Editor, Rectangle Tool, etc.) or paste the shape if you already drew it and copied it. Then select the Arrange->Combine Shapes operation. The mask shape is used to cut the shapes underneath. I never did see anything describing the details of how to do the cutting with one of the shapes already in the composition so I went the mask route, which is explained there.
So I selected all, then went to mask mode, drew a rectangle (at the right in 2nd screen grab below) then Arrange/Combine shapes/ and none of those selections: Add, subtract, intersect and slice... appear to do a darned thing to the objects.
How do i export a .iam to STEP or STP or IGES without the three being expordted? i dont want the costumers to be able to see the anything in the three but 1 file (base1 or something).
What i do today is, i make a new part and derive the .iam file and then export it to step but this is getting hard to do when you have many .iam files.
I am trying to export a dwg to STEP in inventor 2013.
The exprort to STEP tab is greyed out and can't be clicked on.
I have Photoshop cs5. I also have the Epson R1900 printer. I love this printer but if I don't print enough the heads get clogged. Any RGB color codes or a site where I can download a color bar page that would represent all eight colors of my Epson printer.
What I want to do is print a 8.5 x 11 page every few days that will use each of the print heads wherefore keeping the print heads from clogging.
I am having a rather strange problem with PSP X14. I will describe my general workflow and where the problem occurs.
I do some editing to my photo and save it as a full size image. Next I resize it to a much smaller version for use online. I have no problems at all with these two steps. Next, I cancel the resized dimensions and resize it again to a file closer to the original size, after I sometimes sharpen it and add a canvas. Many of the thumbnails for this last step have horizontal color bars across the bottom of the thumbnail, ranging roughly from 1/16 to 1/3 of the image size. When I hit on it and open the file, the bar is not there. I tried opening this thumbnail in another photo editing program and when I have access to the thumbnails for opening, that bar is there on select images, and when I open the file, it's gone. Unfortunately I haven't had the opportunity to try printing it yet.
I've been following this basic formula for preparing and editing photos for a very long time and haven't had this problem until recently. And it's random, as not all images have this problem. I tried changing this process and reopening the full size file that has been edited and resize that one, but am getting the same random results. I have no problems with the thumbnails for the full size and the first reduced size images.
I have been a long time user of PSP...since v.7 and upgrade versions regularly. I'm running Windows 7 premium, 64-bit on a laptop with an Intel i-7 processor.
I am printing on an Epson Stylus Pro 4800. I am using Photoshop CS2 (version 9.0.2)and have the Color Settings set at North American Prepress2 which was recommended for using ICC settings. I have the printer set to "No Color Adjustments" (i.e. let Photoshop control the color).
Each time I send an image to print, the printer is printing color calibration bars then ejecting the sheet. The image is printing on the second sheet. At $2.50 per sheet (fine art paper), I can't afford to waste the paper. Does anyone know how to turn the color calibration bars off. I have already checked the Output Options in the print dialog box and the calibration box is unchecked.
Is there a way to define the export tolerance of a step file? Now the tolerance is always set to 0.01mm but i need a tolerance of 0.001 to go further in another CAD / CAM System.
View 6 Replies View RelatedI have recorded a set of actions that I am automating for a few images. At the end I recorded the export and close steps (I records Save For Web - PNG 24 settings). The issue is that the script overrides each image once it's saved. How can I run the image editing part of the script, and then insure that each file is being exported seperatly with a different name? Should I have not recorded the export part of the script?
View 3 Replies View RelatedHow can I use multiple export presets in a single step. After I am done editing, I like to export my RAW images as JPG in 4-5 different resolutions and sizes. Currently, this means having to use the export dialog for each preset. Can I do this in a single step by grouping the presets or something?
View 1 Replies View RelatedHow to change the color of tool bars. The interface of ACA 2012 is too negative, I mean it's too much grey or light grey.
I would like to have 2008 or early version interface.
In my company we work with quite large assemblies, a small project im working on now, contains 527 documents with a total of 3088 occurrenses. Our customers often request STEP files which is a real pain for us to create.
Usually we have to start exporting the assembly at closing time and let the computer work over night, and the product is often a file in the 200mb range, which is too heavy to handle via e-mail, and also takes a lot of time to import to other CAD software.
Using the Task Scheduler is not an option since our file server isnt compatible and refuses to let go of files unless they are checked out manually.
I am trying to export step files from Inventor 2012 into Surfcam. Any files that were created in Inventor translate over as solids. Files that I have imported from step files, recognized features, modified and exported again come into Surfcam as Nurb surfaces. I also tried using Inventor 2013 with the same results.
I've never experienced this problem with earlier versions of Inventor.
it's possible to have a standard text filled in the "Authorization" and "Organization", so that I don't have to enter the same text each time I want to export a STEP file.
Product Design Suite 2014
Inventor 2014, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
I have a Command Method which has a loop that opens and commits transactions until the user is finished with it and exits.Â
I would like each transaction to be undone separately but the undo command undoes the CommandMethod (along with all the transactions that occurred while in the loop)
Do I need to use the COM StartUndoMark and EndUndoMark to get this working?
I have somehow reversed the process of changing a sky in my photo so that when I get to the point of painting in the sky from the 2nd photo, it is painting with white (not black) that brings out the background I want on the original photo. Where have I gone wrong? Is there anywhere I can go to find a detailed step-by-step process for doing Layer Masks?
View 1 Replies View RelatedI need to create an illustration with only a certain amount of colors. I cleared out everything from my swatches palette and asked it to "add used colors." A color keeps popping up when I do this that I can't find in the actual illustration! But it must be somewhere. Is there a way to search for that color... so I can see where it is? I've tried selecting every piece of artwork, checking it, then locking it... but I'm not finding it.
Â
I'm using CS4 on a Mac.
When I import a step file, the color/texture of the step file has gone way off from expected.
Before, the same model used to be gray, now most models have got a green pcb texture, and there seems to be no way to correct it in the model/solid properties.
I have CTR-Z mapped to step backward.
Using two different shortcuts for "undo" (one step back) and "Step Backward" (Multiple steps back) makes no sense to me. As such, I rarely use the regular undo, and do not have it mapped.
The case:
When I switch to a new layer, do a brush stroke and undo it, photoshop treats my undo as a switch back to the layer I came from. This happens a LOT, and not just to me, but to a lot of designers I know (I'm a GUI designer at a game company). Some of them have even formed a habit of "erasing" a bit in an empty part of the layer, just in case the'd later want to undo. That's bad.
My proposed solution:
-First undo my stroke, Leave my selected layer alone.
-On a NEXT press of "Step backward" change my current layer to the one I came from.
I have drawn figure1 with rectangle and press/pull command. I have drawn figure2 with line command. I want to trim the lines of figure1 which are shown in red color in figure2.How to do this?
View 4 Replies View RelatedIf you take blend tool to gate one color to other or same or gray scale it give correct result. But if you use New color style and new gradient it show wrong effect in CMYK.
View 6 Replies View RelatedHow can I export a pdf/x for commercial printing and have the black text export as 100% process black, not cmyk tints?
View 6 Replies View RelatedEvery time I try to export this file to a .pdf I get an error: "access violation exception at 0xF440D0D0" and the program crashes. I did a search on TalkGraphics without finding something.
View 5 Replies View RelatedI trying to export (as a cmx) from xara to corel, and yes it opens in corel but it has lost any blends and feather regions that were created in xara, I need to move files into draw, so that I can then export them as cad files, am I doing something wrong, is there another way of creating cad files in xara?
View 3 Replies View RelatedDoes the embedding of color profiles no longer work in Designer Pro 6?
Try to export as PDF.
Preset Selections: Custom.
Click on Advanced Options.
Choose Pre-Press.
Here I chose a custom color profile (PSRgravureHWC.icc), which significantly changes the colors.
Everything worked okay in Xtreme Pro 5.
But now, when I switch on Embed profile, the resulting PDF shows the same colors, as if the switch was not ticked.
I haven't used Xara in a while but tonight I did some adjustments on a jpg and tried to export it as a .pdf. For some reason I do not have the option under Export Files to export to a pdf. I know I have done this many times in the past. Is my Xara corrupted or something.
View 9 Replies View RelatedI am exporting a file that contains a background photo with text over the top. When I export, the text is great....crisp and clean however my background image is becoming pixelated since I am making this a large print. Any tips to increasing resolution to photo files. I see there is a way to increase / bring in files at their actual size. So I may need to try that. Others?
View 9 Replies View RelatedI have a xara file with lots of images.The saved xara file is about 45Mb.If I try and export this as PDF with 300dpi or 600dpi, I get an error that says 'File could not be saved'
Is Designer Pro X not capable of handling this size of file?
I would imagine that there are users out there who are dealing with very large images and probably much larger file sizes.Is it simply that the dpi I am choosing, is the cause?