AutoCAD Inventor :: Export Step Files From 2012 Into Surfcam

Oct 15, 2012

I am trying to export step files from Inventor 2012 into Surfcam. Any files that were created in Inventor translate over as solids. Files that I have imported from step files, recognized features, modified and exported again come into Surfcam as Nurb surfaces. I also tried using Inventor 2013 with the same results.

I've never experienced this problem with earlier versions of Inventor.

View 3 Replies


ADVERTISEMENT

AutoCAD Inventor :: 2012 Cannot Save Or Open STEP / IGES Files

Jul 25, 2013

Since we upgraded to Inventor 2012 SP1 on W7 x64 most machines cannot open or save out step or iges files.  The translator shows as 'On demand' and when i save copy as the 'options' button is inactive.  We just get the standard error 'Problems encountered while saving the document'.

I see lots of old posts but nothing relating specifically to stp files. 

Inventor 2010

View 4 Replies View Related

AutoCAD Inventor :: Open 2013 Part With 2012 - Sat / Step Not Working

Feb 28, 2013

I have always used step files to save back to previous releases but i cant seem to get them to open in 2012, I get the attached message

I cant see any version options when saving the sat or stp file, also dwg export, import doesnt work either

I can see other people are still able to do this, is there a setting somewhere?

View 4 Replies View Related

AutoCAD Inventor :: Export IAM To STEP / STP Or IGES

Sep 5, 2012

How do i export a .iam to STEP or STP or IGES without the three being expordted? i dont want the costumers to be able to see the anything in the three but 1 file (base1 or something).

What i do today is, i make a new part and derive the .iam file and then export it to step but this is getting hard to do when you have many .iam files.

View 4 Replies View Related

AutoCAD Inventor :: 2013 - Export DWG To STEP?

Sep 4, 2013

I am trying to export a dwg to STEP in inventor 2013.

The exprort to STEP tab is greyed out and can't be clicked on.

View 1 Replies View Related

AutoCAD Inventor :: Export Tolerance Of A Step File

Oct 4, 2010

Is there a way to define the export tolerance of a step file? Now the tolerance is always set to 0.01mm but i need a tolerance of 0.001 to go further in another CAD / CAM System.

View 6 Replies View Related

AutoCAD Inventor :: Export Large Assembly To Step File?

Nov 14, 2012

In my company we work with quite large assemblies, a small project im working on now, contains 527 documents with a total of 3088 occurrenses. Our customers often request STEP files which is a real pain for us to create.

Usually we have to start exporting the assembly at closing time and let the computer work over night, and the product is often a file in the 200mb range, which is too heavy to handle via e-mail, and also takes a lot of time to import to other CAD software.

Using the Task Scheduler is not an option since our file server isnt compatible and refuses to let go of files unless they are checked out manually.

View 1 Replies View Related

AutoCAD Inventor :: Standard Text In Fields In STEP Export Dialog

Jun 13, 2012

it's possible to have a standard text filled in the "Authorization" and "Organization", so that I don't have to enter the same text each time I want to export a STEP file.

Product Design Suite 2014
Inventor 2014, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)

View 6 Replies View Related

AutoCAD Inventor :: Can STEP Files Still Be Used In Assembly

Sep 3, 2012

Basically, my school has the 2012 version of Inventor while I have 2013, and I was wondering if I can still use STEP files in an assembly, and also in my drawing sheets.

View 9 Replies View Related

AutoCAD Inventor :: Exporting To Step Files?

Nov 5, 2013

I can use the program and quite happily create components, sub assemblys, and master assemblys.Our company still doesn't have ANY 3D FILES. I have been tasked with eventually creating a full range of end product drawings as Step files. They are wanting BIMS. I see this a step to far atm.....

With the products that manufacture inhouse (industrial / comercial boilers) I have produced each individual component within the boiler to eventually aid to manufacture and bombs to intergrate with SAP.

With doing this every boiler I have done in inventor all the components are there and easily accessable. Am I right in thinking it needs to be exported as a step file to lock everything within the master assembly.

When I have exported it to a step file, when it comes to importing it into an  assembly file the components are still accessable when expanded in the menu at the side. Is this because im opening it on my computer or have I done something wrong.....

View 9 Replies View Related

AutoCAD Inventor :: Importing Step Files Into Assemblies

Feb 5, 2013

I am trying to import a step assembly file in 2013.  Under the options settings I no longer have or see the ability to,

(Import Multiple Solids Parts as Assembly) This was an option to check.

This seems to be a big issue as we always import the assemblies, then ground them. And this gives us the option of moving or deleting certain components, as well as opening individual components in their own part environment.

View 9 Replies View Related

AutoCAD Inventor :: Rename Imported STEP Files

Dec 6, 2011

I'm currently creating a procedure to manage a standard part library.

For that, I'm trying to import downloaded STEP files from suppliers online libraries, and some of these STEP files contain assemblies.

I can open them as wanted in Inventor (1 .IAM and .IPT files), problem is I can't edit .IPT names. I can only rename them in Windows, but I would like to rename in Inventor before saving for the first time.

I would like to have something like that, with "Assembly" the assembly name:

Assembly.IAM
Assembly_1.IPT
Assembly_2.IPT
Assembly_3.IPT
...

How can I do that without renaming in Windows?

I attached the STEP file I'm using, downloaded form McMaster.

View 3 Replies View Related

AutoCAD Inventor :: Saving Files In STEP Format?

Mar 20, 2012

I have a folder with a couple of files that i need to save a copy as STEP format, right now they are in CATIA, is it possible to save them all at once? or I will have to open one by one and save it?

View 1 Replies View Related

AutoCAD Inventor :: Hangs When Importing Step Files?

Dec 5, 2013

Inventor hangs when importing Step files. I have tried unchecking the embed in document option with no luck. Is there anything else I can try?

View 9 Replies View Related

AutoCAD Inventor :: Converting Step Files For Mechanical Desktop?

Feb 7, 2012

I have a problem with some step files I recieved from a vendor for an assembly.  Basically what is happening is I download the step file. Then bring it into Mechanical Desktop.  When brought into Mechanical desktop, it is downloaded in metric where my entire assembly is in standard/english format.  What I did when I had Inventor 2011 is bring the step file into inventor, go to document settings and switch the unit to inch from mm.  Then save the step file and when I brought it into Mechanical desktop it was in the correct unit and scale.

Now with 2012 Inventor, when I bring the step file in, it is automatically in english/standard format.  So I save the step file out and try to open it in Mechanical desktop only to have the file back into mm and 25.4x the actual size it should be.

how to save the step file out like in 2011 to make sure the unit is saved in the correct format.  This is extremely aggrevating and waste of time.  I would have had the part reverse engineered by now if i quit trying to use the vendors standard step files.

This problem doesn't only happen with a certain vendor's drawings either, it goes for all step files I have recieved since getting Inventor2012.

View 5 Replies View Related

AutoCAD Inventor :: Saving STEP Files In Specific Folder

Jul 5, 2013

When opening a step file and trying to save it, it keeps trying to save it in the 'My Documents/inventor' folder. Even if i select save as and pick a specific folder elsewhere it only saves the top assembly in that location and all sub assemblies and parts are then saved in the My Documents/Inventor folder.

Additional info:

I am operating Autodesk inventor pro 2013.

My project is set to a folder C:inventor workspace

And the folder i am trying to save into is in that folder

View 5 Replies View Related

AutoCAD Inventor :: Convert Files IPT IAM In STEP Or SAT In Batch Mode

Oct 28, 2011

Can we convert the Inventor files IPT IAM in STEP or SAT in Batch mode

View 2 Replies View Related

AutoCAD Inventor :: Unable To Import Step / IGES Files

Nov 8, 2011

Currently using the following hardware; HP Z800 Xeon X5677 with 24GBram and 3x147 SAS in raid configuration

Windows professional 64-bit

98% of our work consist of creating idw drawings of complete factory's plants, large 3d plant models.

Therefore we have many subcontractors and from them we receive 3D step/iges models (size approx. 240MB), we want to be able to import these in to our models. But for the moment we are unable to import these files into inventor (due to size probably), it takes very long (over 36 hours) to convert, and most of the times we get a error... or inventor hangs.

When we are able to convert these we have performance problems because of size of our models. 

So my questions are; 

 - why does it take so long to open,
 - how can we reduce these files.

View 2 Replies View Related

AutoCAD Inventor :: 2011 Freezes When Opening STEP Files

Nov 30, 2011

Autodesk Inventor Professional 2011

It freezes when I try to open a STEP file, even one I just created.

View 5 Replies View Related

AutoCAD Inventor :: Imported Step Files Have Weld Bead Surfaces

Apr 5, 2013

i just started using inventor 2013.

it seems that there's a setting so that when it imports steps it assigns weld bead colours to all the surfaces of the imported model. is there a way to change this behaviour so that it imports with solid colour surfaces instead?

View 3 Replies View Related

AutoCAD Inventor :: Derived Parts Exporting As Empty Step Files?

Jun 11, 2012

I've created two similar but different base files.

I've derived each into parts that have a few different features.

In both cases, step exports of the base solid are fine but exports of the unique parts are empty.

Step exports of their assemblies are complete except for these parts.

Sat exports work fine for both parts and assemblies.

It happens in 2012 SP2 and 2013.

View 9 Replies View Related

AutoCAD Inventor :: Importing Step And Iges Files Takes Forever In 2013 FDS?

May 8, 2013

I have recently upgraded to 2013 FDS and now when I try to import Acad files (sometimes up to 2000 solids) it takes virtually a full day to import one file.  When I had 2011 I could import these files much faster. 

View 1 Replies View Related

AutoCAD Inventor :: 2012 - Export To DWG

Aug 23, 2011

I'm having an issue with exporting an Inventor 2012 .idw to AutoCAD DWG.I am trying to export a multi-sheet drawing to AutoCAD 2007 using the Model Space - Full Scale option.

IT seems like no matter what I try, it will only export the geometry from the first sheet. It creates the other 2 .dwg files (Sheet 2 and 3) but they are empty. The drawing set is comprised of a large plan view on sheet 1 and then a bunch of section views, originally cut on sheet 1 and then moved to the other sheets.

I tried using the other options "Sheet Scale - Model Space" which left me with some odd scale factor on the section views (completely different from the scale on the drawing) so, I can't use that.And "Base View Scale - Model Space" or "Layout" give me the same result as the 1:1 scale option... all 3 files, but 2 and 3 are empty.I tried .dxf and other AutoCAD versions with no change.

View 5 Replies View Related

AutoCAD 2013 :: Changing STEP File So That It Works On 2012 Version

Jun 13, 2013

I am doing a placement at company and they asked me to edit a drawing but i don't know how to convert or import the file.

View 2 Replies View Related

AutoCAD Inventor :: 2012 - STL Export Units?

Nov 8, 2011

I'm using Ineventor 2012 to export files ive made to cut them out on a CNC i recently bought. Ive been having problems with the CAM software im suing to genrate toolpaths (MeshCAM) making the part smaller than it actually is, so i made a 1"x1"x1" cude and imported it to MeshCAM, it imported the demensions 2.54x2.54x2.54 Why is invortor exporting the stl in metric not english units?

View 1 Replies View Related

Lightroom :: How To Export All The Snapshots At Once In A Single Export Step

Jan 20, 2013

I've created various snapshots of a series of photos and I'm ready to export. Is there a way to export all the snapshots at once, in a single export step? Up to now, I've been doing this step by step, exporting one version of the image, than going to the next snapshot and exporting again.

View 3 Replies View Related

Maya :: 2012 Direct Connect Import Step File?

May 30, 2012

I've just install DC. Seems to work fine, plugin is loaded and i can import .step files with no problem. Also can tessalate as i wish.

My problem is no uvs are kept from original file previously made in solidworks.

When my nurb is selected and i go to uv texture editor is completely blank.

Why my uvs are not kept?

View 1 Replies View Related

AutoCAD Inventor :: Exporting Files With 2012?

Feb 27, 2013

I have a customer that wants the .idw file. If I do a save as and ship him the file I know all the links will be broken and won't work right. I remember in AutoCad had a command called Etransit where you can export a drawing and have everything attached to it exported with it so you didn't lose the xrefs, layers, ect.... Does inventor have something like that where I can export the .idw and it'll attach all the .ipt and .iam files to it in like a .zip file?

View 4 Replies View Related

AutoCAD Inventor :: Extrude IGS Files In 2012

Dec 27, 2011

I wonder if I can extrude a .igs file in inventor 2012. I had been trying with the thicken/offset feature but it didn't work, the program get stucked when I use this tool. The thing is I am trying to convert a surface to solid with volume.

I attached the  .ipt  file(compressed as .rar) where I opened the .igs file to work on it.

View 3 Replies View Related

AutoCAD Inventor :: Does 2012 Not Import STP Files

Nov 25, 2013

I am trying to import a ProE created STP or STEP file of a solid model into 2012.  STP does not seem to be an option under format types.  AutoCAD Mechanical 2012 seems to import the file just fine and it looks and act like a solid.  I saved the file out in dwg format.  When I try to import the dwg file into Inventor or just open it, a "styles conflict" dialog box comes up even though the dwg file being imported and the ipt file being used are the standard versions that come with the programs.  If I click OK an idw file opens displaying a blank sheet.  Then Inventor acts like it is done with the task.

View 2 Replies View Related

AutoCAD Inventor :: 2012 Hangs When Opening IDW Files?

Jul 16, 2012

I had a crash on exiting Inventor 2012 (fully up to date, service packs installed etc.) and since that crash I can't open any drawing (.idw) file in Inventor: it appears to hang, with no processor activity etc.

The same files open, view and print fine with Inventor View.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved