AutoCAD Inventor :: Convert Files IPT IAM In STEP Or SAT In Batch Mode
Oct 28, 2011Can we convert the Inventor files IPT IAM in STEP or SAT in Batch mode
View 2 Replies
ADVERTISEMENT
AutoCAD Inventor :: Convert STEP Model To IPT
Nov 19, 2012I followed up their way as URL....but still I cannot get correct solid model when I try to convert attached STEP model to IPT. I just can get surface model, but I do not solid one.
View 3 Replies View RelatedAutoCAD Inventor :: Convert DWF File To STEP?
Jan 8, 2013We had a CAD designer create a 3D drawing for us. I am pretty sure he did it in Inventor. We only have Inventor LT here. I am so lost its not even funny and my boss is breathing down my back to get this done. How in the heck do I convert the .dw file to a .step or .iges file!?
View 1 Replies View RelatedLightroom :: Import CR2 Files And Convert To JPGs In One Step?
Feb 4, 2013How can I import CR2 files and convert to JPGs in one step?
View 4 Replies View RelatedAutoCAD Civil 3D :: Batch Convert DWG Files To DXF?
Mar 7, 2013We have to submit a set of 18 drawings to a local municipality. They want the CAD files (in this case Civil3D 2011) in .DXF format. Is there an easy way to convert them all at once or do I have to SAVEAS each file one at a time?
View 5 Replies View RelatedAutoCAD 2013 :: How To Batch Convert CCM Files To DWG
Aug 8, 2012How to batch convert .ccm files to dwg? I believe they are called CopyCad Model files.
View 1 Replies View RelatedAutoCAD Inventor :: Can STEP Files Still Be Used In Assembly
Sep 3, 2012Basically, my school has the 2012 version of Inventor while I have 2013, and I was wondering if I can still use STEP files in an assembly, and also in my drawing sheets.
View 9 Replies View RelatedAutoCAD Inventor :: Exporting To Step Files?
Nov 5, 2013I can use the program and quite happily create components, sub assemblys, and master assemblys.Our company still doesn't have ANY 3D FILES. I have been tasked with eventually creating a full range of end product drawings as Step files. They are wanting BIMS. I see this a step to far atm.....
With the products that manufacture inhouse (industrial / comercial boilers) I have produced each individual component within the boiler to eventually aid to manufacture and bombs to intergrate with SAP.
With doing this every boiler I have done in inventor all the components are there and easily accessable. Am I right in thinking it needs to be exported as a step file to lock everything within the master assembly.
When I have exported it to a step file, when it comes to importing it into an assembly file the components are still accessable when expanded in the menu at the side. Is this because im opening it on my computer or have I done something wrong.....
AutoCAD Inventor :: Importing Step Files Into Assemblies
Feb 5, 2013I am trying to import a step assembly file in 2013. Under the options settings I no longer have or see the ability to,
(Import Multiple Solids Parts as Assembly) This was an option to check.
This seems to be a big issue as we always import the assemblies, then ground them. And this gives us the option of moving or deleting certain components, as well as opening individual components in their own part environment.
AutoCAD Inventor :: Rename Imported STEP Files
Dec 6, 2011I'm currently creating a procedure to manage a standard part library.
For that, I'm trying to import downloaded STEP files from suppliers online libraries, and some of these STEP files contain assemblies.
I can open them as wanted in Inventor (1 .IAM and .IPT files), problem is I can't edit .IPT names. I can only rename them in Windows, but I would like to rename in Inventor before saving for the first time.
I would like to have something like that, with "Assembly" the assembly name:
Assembly.IAM
Assembly_1.IPT
Assembly_2.IPT
Assembly_3.IPT
...
How can I do that without renaming in Windows?
I attached the STEP file I'm using, downloaded form McMaster.
AutoCAD Inventor :: Saving Files In STEP Format?
Mar 20, 2012I have a folder with a couple of files that i need to save a copy as STEP format, right now they are in CATIA, is it possible to save them all at once? or I will have to open one by one and save it?
View 1 Replies View RelatedAutoCAD Inventor :: Hangs When Importing Step Files?
Dec 5, 2013Inventor hangs when importing Step files. I have tried unchecking the embed in document option with no luck. Is there anything else I can try?
View 9 Replies View RelatedIllustrator :: Batch Convert AI Files To SVG?
May 1, 2013Looking for a way to convert a directory full of .ai files to SVG.
Is there a batch process similar to what fireworks has?
AutoCAD Inventor :: Converting Step Files For Mechanical Desktop?
Feb 7, 2012I have a problem with some step files I recieved from a vendor for an assembly. Basically what is happening is I download the step file. Then bring it into Mechanical Desktop. When brought into Mechanical desktop, it is downloaded in metric where my entire assembly is in standard/english format. What I did when I had Inventor 2011 is bring the step file into inventor, go to document settings and switch the unit to inch from mm. Then save the step file and when I brought it into Mechanical desktop it was in the correct unit and scale.
Now with 2012 Inventor, when I bring the step file in, it is automatically in english/standard format. So I save the step file out and try to open it in Mechanical desktop only to have the file back into mm and 25.4x the actual size it should be.
how to save the step file out like in 2011 to make sure the unit is saved in the correct format. This is extremely aggrevating and waste of time. I would have had the part reverse engineered by now if i quit trying to use the vendors standard step files.
This problem doesn't only happen with a certain vendor's drawings either, it goes for all step files I have recieved since getting Inventor2012.
AutoCAD Inventor :: Export Step Files From 2012 Into Surfcam
Oct 15, 2012I am trying to export step files from Inventor 2012 into Surfcam. Any files that were created in Inventor translate over as solids. Files that I have imported from step files, recognized features, modified and exported again come into Surfcam as Nurb surfaces. I also tried using Inventor 2013 with the same results.
I've never experienced this problem with earlier versions of Inventor.
AutoCAD Inventor :: Saving STEP Files In Specific Folder
Jul 5, 2013When opening a step file and trying to save it, it keeps trying to save it in the 'My Documents/inventor' folder. Even if i select save as and pick a specific folder elsewhere it only saves the top assembly in that location and all sub assemblies and parts are then saved in the My Documents/Inventor folder.
Additional info:
I am operating Autodesk inventor pro 2013.
My project is set to a folder C:inventor workspace
And the folder i am trying to save into is in that folder
AutoCAD Inventor :: Unable To Import Step / IGES Files
Nov 8, 2011Currently using the following hardware; HP Z800 Xeon X5677 with 24GBram and 3x147 SAS in raid configuration
Windows professional 64-bit
98% of our work consist of creating idw drawings of complete factory's plants, large 3d plant models.
Therefore we have many subcontractors and from them we receive 3D step/iges models (size approx. 240MB), we want to be able to import these in to our models. But for the moment we are unable to import these files into inventor (due to size probably), it takes very long (over 36 hours) to convert, and most of the times we get a error... or inventor hangs.
When we are able to convert these we have performance problems because of size of our models.
So my questions are;
- why does it take so long to open,
- how can we reduce these files.
AutoCAD Inventor :: 2011 Freezes When Opening STEP Files
Nov 30, 2011Autodesk Inventor Professional 2011
It freezes when I try to open a STEP file, even one I just created.
Photoshop :: Batch Action To Convert Files
Jul 13, 2012I want to save space in my external hard drive by converting RAW files to DNG files. How to create an action for batch processing these files.
View 7 Replies View RelatedXara :: Batch Convert / Export Files To SVG
Jun 8, 2011In XDP7 is there a way to batch covert .xar files to .svg? Is there a plugin maybe?
View 9 Replies View RelatedLightroom :: Batch Convert Raw Files To DNG Via Library
Apr 4, 2013I have LR 4.4 running on a Win 7 64 bit PC...
I selected 4 RAW files (CR2) to convert to DNG via the Library modules 'convert to DNG' and then delete the CR2 file.
It converted only the last of the 4 files and left the other 3 untouched as CR2 files. Can LR not batch convert the RAW files in this manner??
AutoCAD Inventor :: Imported Step Files Have Weld Bead Surfaces
Apr 5, 2013i just started using inventor 2013.
it seems that there's a setting so that when it imports steps it assigns weld bead colours to all the surfaces of the imported model. is there a way to change this behaviour so that it imports with solid colour surfaces instead?
AutoCAD Inventor :: 2012 Cannot Save Or Open STEP / IGES Files
Jul 25, 2013Since we upgraded to Inventor 2012 SP1 on W7 x64 most machines cannot open or save out step or iges files. The translator shows as 'On demand' and when i save copy as the 'options' button is inactive. We just get the standard error 'Problems encountered while saving the document'.
I see lots of old posts but nothing relating specifically to stp files.
Inventor 2010
AutoCAD Inventor :: Derived Parts Exporting As Empty Step Files?
Jun 11, 2012I've created two similar but different base files.
I've derived each into parts that have a few different features.
In both cases, step exports of the base solid are fine but exports of the unique parts are empty.
Step exports of their assemblies are complete except for these parts.
Sat exports work fine for both parts and assemblies.
It happens in 2012 SP2 and 2013.
Corel DESIGNER Technical Suite X5 :: PhotoPaint - Cannot Select Multiple Files For Batch Mode
Jun 19, 2012PhotoPaint: Cannot select multiple files for batch mode
View 5 Replies View RelatedCorelDRAW Graphics Suite X5 :: Batch Convert DWG Files
Jul 28, 2011I've received quite a few DWG files and I would like to batch convert them into PDFs so I can share them with the sales staff. Also, DRAW deals with PDFs much better than DWG and the added feature that the PDFs will have all outlines converted to black.
My workflow now is to open each DWG in DWG True view and plot it to PDF using there built-in engine. It works but I have to convert all outlines to black inside DRAW plus I have to do each file one at a time. I've downloaded a trial version of deskDOC DWG to PDF with less than stellar results .
AutoCAD Inventor :: Importing Step And Iges Files Takes Forever In 2013 FDS?
May 8, 2013I have recently upgraded to 2013 FDS and now when I try to import Acad files (sometimes up to 2000 solids) it takes virtually a full day to import one file. When I had 2011 I could import these files much faster.
View 1 Replies View RelatedCorelDRAW Graphics Suite X3 :: Batch Convert Gallery CCX Files To CMX?
Feb 19, 2009Some years ago purchased CorelGallery 1,300,000. The vector clipart came in a .CCX format.
However, the Gallery browser no longer loads into my Service Packed Windows XP. Also XP and Vista cannot display .CCX thumbnails in their respective Explorers.
Today I discovered if I change the file type from .CCX to .CMX. the thumnail displays.
My challenge is how to covert about 500,000 files from one to the other en masse.
AutoCad :: Convert STEP To DWG
Sep 7, 2011I have recently started using AutoCAD 3D Plant 2011.
I am trying to create a catalog of Valves that we use on site by getting all the 3D blocks from suppliers. A few of our suppliers are sending me STEP files.
What program these are from and if they can be converted to a format that can be used by AutoCAD?
Photoshop :: Batch Convert Several Thousand TIFF Files To Lossless JPEG-2000?
Jun 27, 2013I am trying to batch convert several thousand TIFF files to lossless JPEG-2000, but I can't get it to work.
When I open a single file and "Save as" JPEG-2000 with the lossless option checked, the result is truly lossless. But when I record this as an Action and then Automate/Batch this action, the output is not saved as lossless.
AutoCAD 2013 :: Convert ACIS (SAT) 3D Model To STEP (STP)
Sep 30, 2013We want to convert ACIS(.sat) 3D Model to the STEP(.stp,.step) Model.
If yes, what is the Procedure for converting ACIS 3D Model to the STEP Model?
Note - We are using:
Software : Autocad 2012-64Bit , Naviswork 2013 , Inventor Ultimate 2014-64 Bit ,Autoplant V8i - SS4 version : 8.11.9.140 , MS-Office 2010 - 64 Bit.
Hardware : Workstation Dell Precision T3600