I've created two similar but different base files.
I've derived each into parts that have a few different features.
In both cases, step exports of the base solid are fine but exports of the unique parts are empty.
Step exports of their assemblies are complete except for these parts.
Sat exports work fine for both parts and assemblies.
It happens in 2012 SP2 and 2013.
I can use the program and quite happily create components, sub assemblys, and master assemblys.Our company still doesn't have ANY 3D FILES. I have been tasked with eventually creating a full range of end product drawings as Step files. They are wanting BIMS. I see this a step to far atm.....
With the products that manufacture inhouse (industrial / comercial boilers) I have produced each individual component within the boiler to eventually aid to manufacture and bombs to intergrate with SAP.
With doing this every boiler I have done in inventor all the components are there and easily accessable. Am I right in thinking it needs to be exported as a step file to lock everything within the master assembly.
When I have exported it to a step file, when it comes to importing it into an assembly file the components are still accessable when expanded in the menu at the side. Is this because im opening it on my computer or have I done something wrong.....
have one assy comprising of a valve, made in steel, an actuator made in aluminum, total weight combined is 36 kg.
I make this assy a derived ipt.. i have tried all the output options, single solid, multy solid and the weight is not the same.. since its a new ipt has its own material, ok makes sense.. .. So i use composite, i get the correct weight (yay), but now i cant turn the visibility off on the 2d drawing, in certain pipe spool view representations.
What is the correct procedure for turning multi material assys into an ipt.. to get the correct weights and get the drawings to work properly?
Most of my part files contain at least one sketch which is derived from another part file. These derived sketches do not update like they did in our previous versions of Inventor.
If you change the geometry on a sketch in the base component, the updates will flow through to the derived parts. If you add geometry, it also works. However, if you delete any geometry from the sketch in the base part, it will not be deleted in the derived sketches in the second, third, etc. parts. The 'deleted' sketch geometry remains in those parts until you go into all the parts which derive from the base part and manually delete it. This is a significant problem for for our workflow.
Is there an option I have missed that changes this behavior so that deleted geometry in a sketch will also be deleted in any derived sketches in other parts?
As a recent convert from ProEngineer to Inventor, if it is possible to vary the parameters exported from the source model in the derived part. The following article (see link below) explains the functionality in ProE - note the ability to see the model tree of the source part and also the ability to have varied items (dimensions, suppress features etc.) URL.....
View 3 Replies View RelatedI am using Inventor 2012. I have a part that has 3 different inserts of a different material that I have to cut out. So I create 3 different assemblies with the part and the the 3 different inserts. Then I create 3 parts to derived the cutouts. Then 3 new assemblies to create the final assembly with the part and its insert.
Does Inventor 2014 have a way to do this with an i Assembly? I can't seem to derive a member of an i Assembly now. In my old CAD system I was able to create a table with one assembly that contained one part, three different inserts and 3 different cutouts. Right now this seems like a lot of work.
I have a problem with the Bolted Conection function when using derived parts created from a multi-body part.
I created a multi-body part in which I pit some holes with the hole function (clearence hole, through, M16, normal). After that I generate all the compontents. In the generated asembly I tried to add a bolted connection (placement by hole). Normaly after selecting the start-plane and the hole it discovered patterns (if exist). Now, after selecting start plane no holes are found.
see attachment for simplified model. Autodesk Inventor Product Design Suite 2013 SP1.1
Is there a way of using ilogic code to untick the highlighted component below. To run at assembly level to itterate down all levelsUntick (Use color overide from source component) update all parts
View 6 Replies View RelatedIt says i can exclude parts from the assembly, when i insert it as a derived part, but the exclude button is greyed in the insert derived part dialog box.
View 4 Replies View RelatedLooks that in Inventor 2012 apperead few errors with coloring when we apply any feature on derived part. Situation:
1. Design Multi body Part with few bodies
2. Make components from it
3. Open derived component
4. Apply new material for this part (for example Copper)
5. Make Hole on any component surface
6. You will get Default color of Hole surface and surface which contact with Hole Color
I have made threads with the standard thread tool (that doesn't seem to make 3D threads but instead pictures of threads) into solid and once I export the STEP file and open it in Solidworks the threads are missing. I have to export the drawing to STEP for machinist that uses Solidworks. How can I include the threads into STEP file?
View 3 Replies View RelatedI am having some trouble with this quick VBA app, I want a utility that can traverse all the parts in a top level assembly and suppress the link to each derived part (multiple) in all the parts in the assembly.
I have played with the following
Public Sub SuppressLink()
Dim partdoc As PartDocument
Set partdoc = ThisApplication.ActiveDocument
partdoc.ComponentDefinition.ReferenceComponents.DerivedPartComponents.Item(1).SuppressLinkToFile = True
End Sub
Which works, but only on one part file, and only on the first derived part. Is there any easy way to make this work on ALL the dervived links and every single part inside an assembly?
Concerning Inventor 2012...
We do a good bit of deriving parts from assemblies. We have a workflow that works well for us, we create PARTS, put them in an ASSEMBLY, then create new PARTS DERIVED from ASSEMBLY. We use Boolean to add/subtract and disregard parts as needed to create these parts. These parts are now given color and reassembled in an yet another final ASSEMBLY as needed and put into a drawing.
Through Inventor 2011 this worked well.
In Inventor 2012 the color is disapering as soon as any change is made on a source part.
1 Changing the color does not work.
2 In the derived from Assembly, opening up (in the browser) the individual .ipt's and right clicking and clicking properties and changing the color only stays until the next change to the source prt.
3 Changing EACH individual face by right click, properties and setting the FACE PROPERTIES from "as feature" to "as part" does work, but is ridiculous to change hundreds of faces on each part. (especially considering we did NOT need this step in 2011)
Is there a switch in the registry (to turn off the standard “as feature” to the parts face).
Inventor 2012
Windows 7 64, 6gb RAM, Nvidia 4000
I have a part that was derived from an assembly. However now I need to make this part have different center dimensions. Is there a way to make a derived part into an iPart without creating more parts? see attachment.
I am using Inventor 2012. BTW the part is more detailed than I am showing in the attachment.
I´m trying to access ComponentDefinition.ReferenceComponents.DerivedPartComponents using Apprentice Server but it tells me "Not implemented". Is there any other way to figure out whether a component is derived or not?
View 1 Replies View RelatedI am running LR 4.3 (student license).
I have dng files in my catalog.
I try to export them as srgb jpg files.
The exported files are empty, as in 0 kb, and will not open.
When I try to open them I get a warning that says the file is empty.
This has never occured before. Just started happening this week.
When ask LR to look for updates, it says I do not need any updates.
When I right click a dng file in LR and try to open it via PS CS5 for editing, I get a message that says my version of LR may need Camera Raw 7.3 and that I should update Camera Raw via the PS menu.
When I go to PS and ask it to update, it says I am up to date.
However, I believe my installed Camera Raw is version 6.
When I try to install Camera Raw 7, it tells me that the update does not apply to me, so I cannot procede.
Why LR 4.3 is all of a sudden exporting empty jpg files?
I am trying to change the materials that are assigned to a STEP file I imported to a different "default" so I can then change a few of the surfaces individually. Is there a way to change the entire part's materials to one material that I select? When I try only one "base" highlights at a time and I can't select the entire part at one time. I am using AutoDesk Inventor 2011 Professional.
View 8 Replies View RelatedBasically, my school has the 2012 version of Inventor while I have 2013, and I was wondering if I can still use STEP files in an assembly, and also in my drawing sheets.
View 9 Replies View RelatedI am trying to import a step assembly file in 2013. Under the options settings I no longer have or see the ability to,
(Import Multiple Solids Parts as Assembly) This was an option to check.
This seems to be a big issue as we always import the assemblies, then ground them. And this gives us the option of moving or deleting certain components, as well as opening individual components in their own part environment.
I'm currently creating a procedure to manage a standard part library.
For that, I'm trying to import downloaded STEP files from suppliers online libraries, and some of these STEP files contain assemblies.
I can open them as wanted in Inventor (1 .IAM and .IPT files), problem is I can't edit .IPT names. I can only rename them in Windows, but I would like to rename in Inventor before saving for the first time.
I would like to have something like that, with "Assembly" the assembly name:
Assembly.IAM
Assembly_1.IPT
Assembly_2.IPT
Assembly_3.IPT
...
How can I do that without renaming in Windows?
I attached the STEP file I'm using, downloaded form McMaster.
I have a folder with a couple of files that i need to save a copy as STEP format, right now they are in CATIA, is it possible to save them all at once? or I will have to open one by one and save it?
View 1 Replies View RelatedInventor hangs when importing Step files. I have tried unchecking the embed in document option with no luck. Is there anything else I can try?
View 9 Replies View RelatedI have a problem with some step files I recieved from a vendor for an assembly. Basically what is happening is I download the step file. Then bring it into Mechanical Desktop. When brought into Mechanical desktop, it is downloaded in metric where my entire assembly is in standard/english format. What I did when I had Inventor 2011 is bring the step file into inventor, go to document settings and switch the unit to inch from mm. Then save the step file and when I brought it into Mechanical desktop it was in the correct unit and scale.
Now with 2012 Inventor, when I bring the step file in, it is automatically in english/standard format. So I save the step file out and try to open it in Mechanical desktop only to have the file back into mm and 25.4x the actual size it should be.
how to save the step file out like in 2011 to make sure the unit is saved in the correct format. This is extremely aggrevating and waste of time. I would have had the part reverse engineered by now if i quit trying to use the vendors standard step files.
This problem doesn't only happen with a certain vendor's drawings either, it goes for all step files I have recieved since getting Inventor2012.
I am trying to export step files from Inventor 2012 into Surfcam. Any files that were created in Inventor translate over as solids. Files that I have imported from step files, recognized features, modified and exported again come into Surfcam as Nurb surfaces. I also tried using Inventor 2013 with the same results.
I've never experienced this problem with earlier versions of Inventor.
When opening a step file and trying to save it, it keeps trying to save it in the 'My Documents/inventor' folder. Even if i select save as and pick a specific folder elsewhere it only saves the top assembly in that location and all sub assemblies and parts are then saved in the My Documents/Inventor folder.
Additional info:
I am operating Autodesk inventor pro 2013.
My project is set to a folder C:inventor workspace
And the folder i am trying to save into is in that folder
Can we convert the Inventor files IPT IAM in STEP or SAT in Batch mode
View 2 Replies View RelatedCurrently using the following hardware; HP Z800 Xeon X5677 with 24GBram and 3x147 SAS in raid configuration
Windows professional 64-bit
98% of our work consist of creating idw drawings of complete factory's plants, large 3d plant models.
Therefore we have many subcontractors and from them we receive 3D step/iges models (size approx. 240MB), we want to be able to import these in to our models. But for the moment we are unable to import these files into inventor (due to size probably), it takes very long (over 36 hours) to convert, and most of the times we get a error... or inventor hangs.
When we are able to convert these we have performance problems because of size of our models.
So my questions are;
- why does it take so long to open,
- how can we reduce these files.
Autodesk Inventor Professional 2011
It freezes when I try to open a STEP file, even one I just created.
I need to export an assembly into revit on by-part basis, with the reason being the need of preserving properties of every part of the assembly.
However, when i try to do that programmatically, no properties are preserved in resulting families. Here is the code i use:
Sub ExportSeparateComponentsWithoutSupression()
Dim oAsmDoc As AssemblyDocument
Set oAsmDoc = ThisApplication.ActiveDocument
Dim oCompDef As AssemblyComponentDefinition
Set oCompDef = oAsmDoc.ComponentDefinition
[code]........
Is it possible to export a weldment and include the weld volumes? I'm attempting to export to an .stl file and the welds are missing in the resultant file. (Or am I doing something wrong?) The weldment was converted from a standard assembly file, but the BoM structure was set to Normal, not Inseparable.
View 9 Replies View RelatedI'm using VB.NET and Inventor 2010. I want to export parts list from idw file to xls or csv file. I checked the internet but could not find trace only exporting BOM from IAM...
I can open inventor and open idw file in VB.net. But could not reach to Parts List.. I checked Inventor2010ObjectModel and sawDrawingdocument>DrawingBOM but could not get success.