I have a part that was derived from an assembly. However now I need to make this part have different center dimensions. Is there a way to make a derived part into an iPart without creating more parts? see attachment.
I am using Inventor 2012. BTW the part is more detailed than I am showing in the attachment.
I have several iParts with their respective derived parts in my library. There are not many other Inventor users here that use those parts, but they might benefit from having those individual parts. The iPart may change from time to time, and in order to keep the individual parts current, I am required to activate them one by one, exporting them to STEP, IGES, SAT or IPT files for both people here to use as well as our Pro-E and Solidworks users. Is there a way to automate that process so I can hit a button and have it save all instances to a certain file format?
View 2 Replies View RelatedI am using Inventor 2012. I have a part that has 3 different inserts of a different material that I have to cut out. So I create 3 different assemblies with the part and the the 3 different inserts. Then I create 3 parts to derived the cutouts. Then 3 new assemblies to create the final assembly with the part and its insert.
Does Inventor 2014 have a way to do this with an i Assembly? I can't seem to derive a member of an i Assembly now. In my old CAD system I was able to create a table with one assembly that contained one part, three different inserts and 3 different cutouts. Right now this seems like a lot of work.
I am trying to patch up a bunch of small holes in a derived assembly. I've tried going to the options tab that comes up when deriving the part/assembly and plugging in values for the range of hole sizes to be patched, but I get no results when clicking ok. I have scaled down the assembly to 1/10 the original size. I set the range of holes to be patched from 0 to 0.25". The diameter of the holes in the assembly are only 0.017" after scaling down.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
I am using IV 2010. After creating a sheetmetal ipart my part grows slightly between each variance.
When toggling between the different parts IV says that they need updated. I have updated them but if I toggle back after updating the other parts IV wants me to update again and it creates a circle of updating. Does this mean that making a sheet metal i part is a half baked idea? Right now the way the program is responding to sheet metal iparts it would appear that you either cannot have a flat pattern or you part cannot lengthen or shorten the different variances with keeping the flat pattern. It would appear that all is well with part with exception of this updating problem. How to eliminate IV from asking to update in between variances while keeping the flat pattern? Also I am using sheet metal extens add in.
My issue is we have Universal assemblies that never change. These assemblies are thousands of parts. (hardware gaskets other random assemblies.) this top level universal assembly never changes.
to increase time in layouts. we would like to create these universal assemblies into 1 sold part.
Is there a was to export an assembly into a single solid part.
We use a similar sub-assembly in almost every assembly we design. So what I would like to do is make a template from this sub-assembly that I can make adaptive, constrain to the proper parts and have it resize to the main assembly. I've been trying to do this for a few weeks now with little success.
I have seen tutorials make adaptive part templates but never adaptive assembly templates. Is this even possible?
I know you can't make individual parts adaptive to multiple assemblies without saving each part as a different file and I think that's where my problems are coming from. Even though I save the template as a different file is it still referencing the original adaptive part in my library folder? If so, is there a way I can make it not do that? I may be way off base there too I don’t know.
have one assy comprising of a valve, made in steel, an actuator made in aluminum, total weight combined is 36 kg.
I make this assy a derived ipt.. i have tried all the output options, single solid, multy solid and the weight is not the same.. since its a new ipt has its own material, ok makes sense.. .. So i use composite, i get the correct weight (yay), but now i cant turn the visibility off on the 2d drawing, in certain pipe spool view representations.
What is the correct procedure for turning multi material assys into an ipt.. to get the correct weights and get the drawings to work properly?
Most of my part files contain at least one sketch which is derived from another part file. These derived sketches do not update like they did in our previous versions of Inventor.
If you change the geometry on a sketch in the base component, the updates will flow through to the derived parts. If you add geometry, it also works. However, if you delete any geometry from the sketch in the base part, it will not be deleted in the derived sketches in the second, third, etc. parts. The 'deleted' sketch geometry remains in those parts until you go into all the parts which derive from the base part and manually delete it. This is a significant problem for for our workflow.
Is there an option I have missed that changes this behavior so that deleted geometry in a sketch will also be deleted in any derived sketches in other parts?
As a recent convert from ProEngineer to Inventor, if it is possible to vary the parameters exported from the source model in the derived part. The following article (see link below) explains the functionality in ProE - note the ability to see the model tree of the source part and also the ability to have varied items (dimensions, suppress features etc.) URL.....
View 3 Replies View RelatedI have a problem with the Bolted Conection function when using derived parts created from a multi-body part.
I created a multi-body part in which I pit some holes with the hole function (clearence hole, through, M16, normal). After that I generate all the compontents. In the generated asembly I tried to add a bolted connection (placement by hole). Normaly after selecting the start-plane and the hole it discovered patterns (if exist). Now, after selecting start plane no holes are found.
see attachment for simplified model. Autodesk Inventor Product Design Suite 2013 SP1.1
Is there a way of using ilogic code to untick the highlighted component below. To run at assembly level to itterate down all levelsUntick (Use color overide from source component) update all parts
View 6 Replies View RelatedIt says i can exclude parts from the assembly, when i insert it as a derived part, but the exclude button is greyed in the insert derived part dialog box.
View 4 Replies View RelatedLooks that in Inventor 2012 apperead few errors with coloring when we apply any feature on derived part. Situation:
1. Design Multi body Part with few bodies
2. Make components from it
3. Open derived component
4. Apply new material for this part (for example Copper)
5. Make Hole on any component surface
6. You will get Default color of Hole surface and surface which contact with Hole Color
After I have created new part by derive from assembly, it have some part moved don’t likely assembly master.
I’m used inventor 2013 with windows 7 (64 bits)
is it possible to get the material of the derived part in vba ?
View 4 Replies View RelatedWe have written an add-in that allows you to specify position and non-uniform scaling while creating a derived part.
[URL]
Some potential uses of this add-in include:
1.. To simulate an iFeature where you add or remove material - use Sculpt to add and Split to remove material. Unlike iFeature you could edit the source and make the changes be reflected in the derived part.
2.. To simulate an iFeature that places a sketch - useful for designing frames.
3.. To design a progressive die - you might want to place, with relative displacements, multiple parts representing different stages (or configurations) of a formed sheet metal part
4.. To realign (rotate) a part - sometimes skeletally driven parts (for example, four-bar linkage members) are not aligned with their "natural" coordinate system, causing skewed drawing views
5.. To derive a part with different scaling factors in X, Y and Z directions, which is useful in mold design
6.. To integrate two skeleton systems that do not share the same coordinate system
7.. To create scaled sketches (this should become useable after R11 SP1)
Possible to have more than 1 derived part in a part.
And is it possible to select on which plane and location the derived part is to be?
I have a part with a derived part but now I want to add another part to it. is this possible?
I have a vba project that can extract an assembly BOM.
However, it does not output derived parts. What is wrong with my code, shown in the attached file?
What I am trying to do is create a ipt file of a "Laser-Cut" component. Use this component to make another component with drilled, tapped holes in it. Then use this plate, containing the drilled and tapped holes in an assembly.
I need to output this "Laser-Cut" part in my vba created BOM. Is it possible?
I can't find a way to create multi flat patters in one part from a lofted sheetmetal part. Also, didn't the developers fix the 'can't make a flat pattern from a derived part'?
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
I am having some trouble with this quick VBA app, I want a utility that can traverse all the parts in a top level assembly and suppress the link to each derived part (multiple) in all the parts in the assembly.
I have played with the following
Public Sub SuppressLink()
Dim partdoc As PartDocument
Set partdoc = ThisApplication.ActiveDocument
partdoc.ComponentDefinition.ReferenceComponents.DerivedPartComponents.Item(1).SuppressLinkToFile = True
End Sub
Which works, but only on one part file, and only on the first derived part. Is there any easy way to make this work on ALL the dervived links and every single part inside an assembly?
Concerning Inventor 2012...
We do a good bit of deriving parts from assemblies. We have a workflow that works well for us, we create PARTS, put them in an ASSEMBLY, then create new PARTS DERIVED from ASSEMBLY. We use Boolean to add/subtract and disregard parts as needed to create these parts. These parts are now given color and reassembled in an yet another final ASSEMBLY as needed and put into a drawing.
Through Inventor 2011 this worked well.
In Inventor 2012 the color is disapering as soon as any change is made on a source part.
1 Changing the color does not work.
2 In the derived from Assembly, opening up (in the browser) the individual .ipt's and right clicking and clicking properties and changing the color only stays until the next change to the source prt.
3 Changing EACH individual face by right click, properties and setting the FACE PROPERTIES from "as feature" to "as part" does work, but is ridiculous to change hundreds of faces on each part. (especially considering we did NOT need this step in 2011)
Is there a switch in the registry (to turn off the standard “as feature” to the parts face).
Inventor 2012
Windows 7 64, 6gb RAM, Nvidia 4000
I've created two similar but different base files.
I've derived each into parts that have a few different features.
In both cases, step exports of the base solid are fine but exports of the unique parts are empty.
Step exports of their assemblies are complete except for these parts.
Sat exports work fine for both parts and assemblies.
It happens in 2012 SP2 and 2013.
I would like to be able to add iproperty values to a derived part from the assembly..!
Breaking it down..:
When i run the rule, it creates a derived part from the Assembly i have open.
The iproperties from the assembly should be copied to the new Derived Part. or just set direclty from the rule, doesn't matter...
I´m trying to measure the base dimensions of simple geometric shapes. I started out with plates since they are easy to measure as long as they sit in 90°, 180° and 270° positions relative to the origin. Then Measure.ExtentsLength, Measure.ExtentsWidth and Measure.ExtentsHeight will give me the base dimensions of a plate.
However, if the plate sits abitrary relative to origin this will obviously fail, since Measure.Extents only measures in x,y,z
Is there any way how I get positions of the geometry that is in the part, like corners surfaces on the B-REP so I can calculate the dimensions properly for a plate. I´m not sure if this is possible with iLogic. I have a strong suspicion VB.net would be needed for this.
Another problem I have is that derived parts don´t get triggered to run a script when I change the geometry in the Multibody Part and the rule is set to run by any modelgeometry change.
I created a derived part and I broken the link with its parent. Is there a way to relink the two parts?
Autodesk Inventor 2011
I got this code earlier from Curtis_Waguespack, and i would like to add a setting... When i run this rule it Derives the assembly, but LOD is set to Master, i would like it to be set to my own (Configurator) LOD...
I don't seem to be able to find anything in this code, that defines LOD...
So far im doing ok with the standard ilogic code, but when it´s API or VBA code im lost.. which leads me to this.. i've been searching the forum back and forth to find a code that performs the feature "Shrinkwrap", and somehow everything i have found so far does not work... even the code example in Inventors help menu under programming, Therefore im trying to solve this with Curtis's code as staring point..
'set a reference to the assembly component definintion.'this assumes an assembly document is open.Dim oAsmCompDef As AssemblyComponentDefinitionoAsmCompDef = ThisApplication.ActiveDocument.ComponentDefinition 'define the path and file nameDim sPathandName As StringsPathandName = ThisDoc.PathAndFileName(False)
[Code] .......
it's possible to create a derived part using only some of the features of the base components i.e. I've got a funny shaped part with a bunch of holes in it, and I need another part with exactly the same shape but totally different holes (location and size)I know you can do this with the different solids in the part (only use some of the solids) but I haven't been able to figure it out with features, if it's possible at all.
I could probably create one base part (just the shape) and derive both parts from that, but then I've got a part lying around doing jack.using IV 11.
Create part 'A' with a sketch containing a block e.g. the block might be a circle.
Derive part 'A' into part 'B'.
Create a feature in part 'B' using the derived circle e.g. an extrusion.
Delete block from part 'A'.
Open part 'B' & update.
Is there a way to change the orientation of a derived part in the "new" part file?
Inventor 2012, w/SP2
Dell Precision T3500, Intel Xeon CPU
W3680 @3.33GHz, 16.0 GB of RAM
Microsoft Windows 7 Pro, 64 Bit Edition
Version 2009, w/SP1
I have created a very simple yet effective tool for starting a new manifold assembly using iLogic. The rules and windows essentially fill out the size of the block, material type, description, project and part number.
Below I have a hydraulic manifold I have designed and from that I created the final .ipt of the internals. The way I did this (which may not be the best method) was to create a second .ipt matching the LxWxH of the original manifold, next I inserted and aligned both into another .iam file, lastly I derived a third .ipt from a subtraction resulting in the third image below. This is a bit time consuming to create, but has been very useful in error checking our designs. I would like to see if iLogic is capable of allowing me to automate this so we can easily create these internal flowpath .ipt's for every manifold we design.
