Lightroom :: 4.3 Exporting Empty JPG Files?
Feb 28, 2013
I am running LR 4.3 (student license).
I have dng files in my catalog.
I try to export them as srgb jpg files.
The exported files are empty, as in 0 kb, and will not open.
When I try to open them I get a warning that says the file is empty.
This has never occured before. Just started happening this week.
When ask LR to look for updates, it says I do not need any updates.
When I right click a dng file in LR and try to open it via PS CS5 for editing, I get a message that says my version of LR may need Camera Raw 7.3 and that I should update Camera Raw via the PS menu.
When I go to PS and ask it to update, it says I am up to date.
However, I believe my installed Camera Raw is version 6.
When I try to install Camera Raw 7, it tells me that the update does not apply to me, so I cannot procede.
Why LR 4.3 is all of a sudden exporting empty jpg files?
View 6 Replies
ADVERTISEMENT
Feb 28, 2013
I have been having a problem exporting w/ Lightroom on a Mac. It seems that no matter what export settings I am using, Lightroom will only properly export a few images out of several. I don't get an error message in Lightroom, but when I try to open the file, it tells me: "The file '__' could not be opened because it is empty". I'm at a loss, and I have to get several files exported today.
View 3 Replies
View Related
Jun 11, 2012
I've created two similar but different base files.
I've derived each into parts that have a few different features.
In both cases, step exports of the base solid are fine but exports of the unique parts are empty.
Step exports of their assemblies are complete except for these parts.
Sat exports work fine for both parts and assemblies.
It happens in 2012 SP2 and 2013.
View 9 Replies
View Related
Feb 17, 2013
When I publish photos from one of my publish services, sometimes they export as 0 kb files and sometimes not. It's pretty random because when I delete the empty files and republish them, some files turn out ok, but other ones are still empty.
View 2 Replies
View Related
Jul 5, 2013
When I usually work with corel, I export my files in .png when I finished working so that I can use them in Power Point or whatever. It was never a problem and still works with most of my files, but I have now one file that simply doesn't want to be converted.
I export it like usual (--> export --> .png) but than in the preview it shows me nothing but an empty bar-like part of the file, so basically nothing. The .png file that is created it empty.
View 4 Replies
View Related
May 17, 2012
when exporting RAW files from lightroom 3, version 3.6, to photoshop 5, (version 12.04, ACR 6.6), raw files go directly to editor, not camera raw editor. This began only after I went from trial version to full version, before it went to RAW editor. If loading directly into PS RAW files do go to RAW editor as they should, but not from LIghtroom.
View 4 Replies
View Related
Feb 23, 2013
When exporting to JPEG, some files export as "zero byte" and in fact are empty files. If a repeatedly try exporting a given file, eventually it will export correctly. I have reinstalled LR; problem persists. Running LR 4.3 on MacBook Air running OS 10.8.2.
View 5 Replies
View Related
Feb 2, 2014
I seem to have lost many original CR files after import > developing > export as jpg. I had made selects to develop and then output images as lower rez jpgs. When I went back to the original folders (on an external hd) those CR select files were missing / a gap in the photo sequence now exists and I cannot locate the originals regardless of searches.
View 1 Replies
View Related
Apr 26, 2012
I've been experiencing some slowdown on my PC when exporting files from LR4. No matter the size, or if it's .jpg or .TIFF... it always gives me some frezzes (mouse etc)
CPUMotherboardGraphicsRAMPhenom II X6 1055T @4.0ghz ASUS Crosshair FORMULA IV CrossFire ATI RADEON 6850 940/1150 8GB DDR3 CORSAIR VENGANCE @1525mhzHard DriveOSMonitorSamsung 500GB / Seagate 500GB / Seagate 1TB Windows 7 ULTIMATE x64 Dell U2410 IPS Lastest ATI driver...
View 4 Replies
View Related
Apr 26, 2013
When exporting files using the export command, only some keyworks will show up in the File info panel (even if I select all). But if I open the same image from Lightroom with the "Edit photo with Photoshop CS-6" all the keywords show up in the file info panel.
View 17 Replies
View Related
Nov 27, 2012
I want to create a user preset for exporting full size jpegs to a folder to be named later. Whenever I try and save it Lightroom defaults to email.
Here are my settings:
Lightroom 4.2
export to hard drive
choose folder later
jpeg format
Adobe RGB
quality=95
View 4 Replies
View Related
Nov 9, 2012
I encountered the following problem: wenn exporting multiple files from Lightroom as JPEG files, I get a random error message that Lr couldn't export some of these files. In the Windows explorer these 'half' export files can't be delete unless Lr is closed. After deleting all the export files, reopening Lr and doing another export run, the same problem occurs, but now on other files. This problem seems to happen at random files.
View 11 Replies
View Related
Jul 31, 2013
When exporting smaller sized files (e.g. jpegs with 1000px width limitation), some of them are 1px shorter (999px in this case). It does not seem to affect files around 2000px export size, so it might be linked to the fixed export problem with output sharpening and noise reduction (URL...)
View 8 Replies
View Related
Oct 3, 2012
When exporting files from lightroom 4 how do I know what the resolution is if the file has been resized in another program? For example I edited (cropped and changed ppi) in Photoship Elements. Returned to Lightroom 4 and began to export to another location on my hard disk and discovered I couldn't find the resolution (ppi) I had used in PSE. Why doesn't Lightroom have the file properties listed and especially the ppi. I want tis file at specific resolution for a specific size. Why can't I get to Adobe Support?
View 8 Replies
View Related
Mar 9, 2013
My Lightroom has unexpectedly stopped exporting files. Nothing that I am aware of has changed--I haven't changed cameras or added new software. No error message comes up, it just does nothing after the Export dialog box.
View 2 Replies
View Related
Feb 1, 2013
This problem only occurs with files that I have been imported from cd's/dvd's into the libraryand I get the msg "Lightroom was unable to prepare the selected file for editing. It will not be opened." Files that are stored on my hard drive have NO PROBLEM in being edited. .
I am new to Lightroom and currently using it on the 30 day trial I have been using PSE for a long time and have over 90,000 images in Organizer and all of my images are on cd's/dvd's, very few are stored on the hard drive.
View 4 Replies
View Related
Jun 6, 2013
I imported some RAW files into Lightroom 4, which I then copied/converted to DNG, then edited them. I now want to export them as full size, high-quality jpegs but I only seem to be able to export them at a maximum of about 800kb, which is far lower than full-size. Is this to do with first the conversion to DNG from RAW on the import? Am I best copying them from raw and not converting them to DNG at all? Next question is, will I have to import the original RAWs again and re-edit them to be able to export as full-size high quality jpegs or is there some way to not have to do them again?
View 7 Replies
View Related
May 28, 2012
When exporting photo files from LR4 using Outlook 2010, where are the sent emails stored?
View 8 Replies
View Related
Aug 28, 2012
Working in LR 3.6, if I export files with "minimize metadata" checked, I loose the tags. The only way they stay in the exported JPG is if I enable that check. But I don't necessarily want all my EXIF data available to everybody.
Is this problem resolved in 4.1?
View 3 Replies
View Related
Jun 8, 2012
The recent files are not listed in the welcome dialog box or under file menu recent files drop down list? How I can get it to list again?
View 1 Replies
View Related
Sep 3, 2013
Is there any way to force Xara to open an empty document and no other files? On load, my DP7 attempts to open a prior document that involves a complex Photoshop filter render. DP7 is hanging up here, the status bar reading, "Please wait: rendering Live Effects..." I could always reinstall if it comes to that, but if there's an easier workaround,
View 5 Replies
View Related
May 30, 2012
I have a bunch of audio files. They are all wave files, but Smoke says they are empty....(but they aren't)
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
View 9 Replies
View Related
Sep 17, 2013
I have a serious problem with Illustrator CC. The layers and colours palettes are empty when I open files. I have had to revert to version CS6 which works fine.
Mac Pro 1,1 2 x 3 GHz Dual Core Intel Xeon OS 10.7.5
View 13 Replies
View Related
Feb 20, 2014
I have been opening my Illustrator vector images in Photoshop to save as JPGs today. All was working fine when all of a sudden I open in PShop, Now all I get is a transparent box. On both rasterized and non rasterized images. This is the latest trial AI/CC by the way. Restarted both programs.
View 3 Replies
View Related
Jan 20, 2014
When I try to use the Process Multiple Files feature, it is giving me a message saying that the process was stopped or cancelled. Press continue or stop. When I click continue, it say that the folder is empty. It is not empty. This is what I use all the time to put my watermark on my photos.
View 4 Replies
View Related
Apr 4, 2013
I made this two different small project yesterday. Now, opening them and I see nothing in the content area and no time line at all, no assets or symbol shows. It is as a new satring file. I tried opening the html file as well but got the same result. I still can run the html file and see my project but can not open them in Animate and do any modification.
I am on a Mac and installed all the software a few days ago.
View 8 Replies
View Related
Oct 31, 2013
I'm a web developer currently slicing an illustrator file for web graphics. Some of the icons and images have shadows, lights, etc, and it's impossible to simply see by a naked eye which pixels contains some shade or nearly transparent color and which doesn't.
It would be extremely useful if I could somehow easily differentiate between empty and non-empty pixels, so I wouldn't miss any when slicing.
View 2 Replies
View Related
Mar 7, 2013
Every time I launch Paint Shop Pro X5 my recent file list is empty. I thought the program was supposed to remember the last four images that were opened. I then have to select File > Open but now the program defaults to a folder called My Pictures. I store my images in my own folder elsewhere. I would like to set my folder to be the default folder. I have to navigate to my folder ever time I launch the tool. If I go to File > Preferences, I do not see a place where I can change the setting.
View 4 Replies
View Related
Mar 23, 2012
Odd, and infuriating, problem. PS CS 5.5, Mac OSX 7.3 'Lion'.I was working on three small, not-complex PSD files. Each had been opened, saved, closed, reopened successfully several times.
When loading some .AI artwork to rasterize, Photoshop CS 5.5 got hung up on the open-file dialog box. I got the spinning beachball. Not only did PS stop responding to any input, but the entire Finder did - and eventually even the mouse cursor wouldn't move. I had to force a shutdown and reboot of the Mac.
When I got my system back up and running, I could no longer load those three files. Every time I try to load them, I get this error:'Could not complete your request because the file is empty.'
Acorn, Pixelmator, and Preview also fail to load the files. Preview tells me they're corrupted. Acorn and Pixelmator report unknown errors.Only one of those three fiels was actually open when Photoshop froze. Yet all three files have been affected.Their filesize on disk is non-zero - 70, 105, and 70 KB (small files, I know - 300 x 250 pixels, and again, not complex).
Duplicating the files doesn't work. Copying them to another volume doesn't work. They appear to be completely, permanently destoryed. Their thumbnails render in Finder, but the files refuse to open.Again, the files arenot huge, but they represent half a day's work.
View 6 Replies
View Related
Mar 25, 2012
LR 3 catalogs are empty in LR 4?
View 2 Replies
View Related
Oct 21, 2013
I had imported photos as CR2's worked on them in develop screen. Closed Lightroom5. When I reopened it all catalog references are gone- from this session and previous sessions. So I pulled in the photos from folders but none of the metadata changes were there (I now know it's because they were imported as CR2's-- won't do THAT again!) Is there anyway to get changes back?
View 3 Replies
View Related
