When exporting to JPEG, some files export as "zero byte" and in fact are empty files. If a repeatedly try exporting a given file, eventually it will export correctly. I have reinstalled LR; problem persists. Running LR 4.3 on MacBook Air running OS 10.8.2.
View 5 Replies
when exporting RAW files from lightroom 3, version 3.6, to photoshop 5, (version 12.04, ACR 6.6), raw files go directly to editor, not camera raw editor. This began only after I went from trial version to full version, before it went to RAW editor. If loading directly into PS RAW files do go to RAW editor as they should, but not from LIghtroom.
View 4 Replies View RelatedI seem to have lost many original CR files after import > developing > export as jpg. I had made selects to develop and then output images as lower rez jpgs. When I went back to the original folders (on an external hd) those CR select files were missing / a gap in the photo sequence now exists and I cannot locate the originals regardless of searches.
View 1 Replies View RelatedI've been experiencing some slowdown on my PC when exporting files from LR4. No matter the size, or if it's .jpg or .TIFF... it always gives me some frezzes (mouse etc)
CPUMotherboardGraphicsRAMPhenom II X6 1055T @4.0ghz ASUS Crosshair FORMULA IV CrossFire ATI RADEON 6850 940/1150 8GB DDR3 CORSAIR VENGANCE @1525mhzHard DriveOSMonitorSamsung 500GB / Seagate 500GB / Seagate 1TB Windows 7 ULTIMATE x64 Dell U2410 IPS Lastest ATI driver...
I am running LR 4.3 (student license).
I have dng files in my catalog.
I try to export them as srgb jpg files.
The exported files are empty, as in 0 kb, and will not open.
When I try to open them I get a warning that says the file is empty.
This has never occured before. Just started happening this week.
When ask LR to look for updates, it says I do not need any updates.
When I right click a dng file in LR and try to open it via PS CS5 for editing, I get a message that says my version of LR may need Camera Raw 7.3 and that I should update Camera Raw via the PS menu.
When I go to PS and ask it to update, it says I am up to date.
However, I believe my installed Camera Raw is version 6.
When I try to install Camera Raw 7, it tells me that the update does not apply to me, so I cannot procede.
Why LR 4.3 is all of a sudden exporting empty jpg files?
When exporting files using the export command, only some keyworks will show up in the File info panel (even if I select all). But if I open the same image from Lightroom with the "Edit photo with Photoshop CS-6" all the keywords show up in the file info panel.
View 17 Replies View RelatedI want to create a user preset for exporting full size jpegs to a folder to be named later. Whenever I try and save it Lightroom defaults to email.
Here are my settings:
Lightroom 4.2
export to hard drive
choose folder later
jpeg format
Adobe RGB
quality=95
I encountered the following problem: wenn exporting multiple files from Lightroom as JPEG files, I get a random error message that Lr couldn't export some of these files. In the Windows explorer these 'half' export files can't be delete unless Lr is closed. After deleting all the export files, reopening Lr and doing another export run, the same problem occurs, but now on other files. This problem seems to happen at random files.
View 11 Replies View RelatedWhen exporting smaller sized files (e.g. jpegs with 1000px width limitation), some of them are 1px shorter (999px in this case). It does not seem to affect files around 2000px export size, so it might be linked to the fixed export problem with output sharpening and noise reduction (URL...)
View 8 Replies View RelatedWhen exporting files from lightroom 4 how do I know what the resolution is if the file has been resized in another program? For example I edited (cropped and changed ppi) in Photoship Elements. Returned to Lightroom 4 and began to export to another location on my hard disk and discovered I couldn't find the resolution (ppi) I had used in PSE. Why doesn't Lightroom have the file properties listed and especially the ppi. I want tis file at specific resolution for a specific size. Why can't I get to Adobe Support?
View 8 Replies View RelatedMy Lightroom has unexpectedly stopped exporting files. Nothing that I am aware of has changed--I haven't changed cameras or added new software. No error message comes up, it just does nothing after the Export dialog box.
View 2 Replies View RelatedThis problem only occurs with files that I have been imported from cd's/dvd's into the libraryand I get the msg "Lightroom was unable to prepare the selected file for editing. It will not be opened." Files that are stored on my hard drive have NO PROBLEM in being edited. .
I am new to Lightroom and currently using it on the 30 day trial I have been using PSE for a long time and have over 90,000 images in Organizer and all of my images are on cd's/dvd's, very few are stored on the hard drive.
I imported some RAW files into Lightroom 4, which I then copied/converted to DNG, then edited them. I now want to export them as full size, high-quality jpegs but I only seem to be able to export them at a maximum of about 800kb, which is far lower than full-size. Is this to do with first the conversion to DNG from RAW on the import? Am I best copying them from raw and not converting them to DNG at all? Next question is, will I have to import the original RAWs again and re-edit them to be able to export as full-size high quality jpegs or is there some way to not have to do them again?
View 7 Replies View RelatedI am trying to learn off this video of how to make Bite Marks . I want to learn how to make bite marks for a plate , but this video really doesn't explain how to do it .
View 5 Replies View RelatedWhen exporting photo files from LR4 using Outlook 2010, where are the sent emails stored?
View 8 Replies View RelatedWorking in LR 3.6, if I export files with "minimize metadata" checked, I loose the tags. The only way they stay in the exported JPG is if I enable that check. But I don't necessarily want all my EXIF data available to everybody.
Is this problem resolved in 4.1?
I just want a brush for PSCS that I can run across an image to look like someone, or something, was biting the edge.
It doesn't have to be fancy or super "real" looking. Just better looking then using a round eraser and chopping it up. Or a "leaf" brush or some other thing.
I also have another question. It's probably quick to answer so I'll just ask it here too. When layering photos over the top of each other; what is the best way to do gradient transparencies around one image, so the image below shows through and looks nice?
I try using just the eraser with a dropped down opacity, but there is no smoothness to the transparency. I tried erasing with a feathered selection, but that was erasing the main part of the "top" image along with the edges.
Whatever technique it is, it would have to be useable on a round image, or square, or utterly hacked up shape. Simply so it has a smooth transparency to the image below.
I can do this easy with a transparent gradient, IF the bottom was just a solid color.
what is the command in AutoCAD 2013 for exporting drawings as DWFx files so that clients who do not have AutoCAD can open or plot a DWFx file using a current version of Internet Explorer or Safari for Apple as an alternative browser.
View 2 Replies View RelatedDoes the exported dwg file always have to be a zip file? I have tried save as a dwg file but it seems to be an Invnetor dwg which has the geometry as a block when opened with AutoCAD. It is a little easier to explode the block in AutoCAD rather than open and extract the zip file, save the extracted dwg then delete the zip file.
View 3 Replies View RelatedJust a quick question, I'm wondering if there is a fix in 3ds max (64) 2011 regarding exporting .mov files. We are in the FIRST Robotics competition and the Autodesk 3D Animation Contest requires the final movie to be in .mov format.
I can always export individual frames and composite the work in Premiere, perhaps a better process in the end; regardless I would love to hear of how the problem will be solved with Apple (just a guess) down the road
Video studio has an export option "save as first video clip" for mpeg files. Don't see that for wmv files. Is there a way to save an edited wmv file using the original files properties without doing a custom setup? Windows Movie Maker seems to do this but it's a pain to use.
View 1 Replies View RelatedI need to export on a regular basis parts of a X6 file to eps. The files are huge an can contain all sorts of filter. They are all powerclips, some with shadows and transparency and symbols containing JPG's.
When i export the first part of it most at the time it works well, exporting the second set I am ending up with only half the data. If I copy and past into a new document and try from there I might get lucky or some other parts are missing, if I reduce the size by 50 percent same thing.
When I export my CDR file to EPS, which I've done thousands of time, it seems to export, but when I try to open it, I get an error "The file.......is an unknown format and cannot be opened". When I look at the file profile in my documents, I can see that it says "0 KB"
I can open up older EPS files from my documents fine, but not able to do that now.
Is there a way of converting PSD files from Photoshop to PDF files for use with acrobat - either using Photoshop, or using Adobe Acrobat 7.
View 5 Replies View RelatedBut I am having some issues in exporting Xara files to either JPG or PNG.
I am developing maps in Xara for use in an online program called Maptool. My current project is to vector a city built around a volcano so it has better detail than what it did in the original map. First off this is a very large map and I have to be able to zoom in use the standard scale of 5ft for use in Maptools (it is probably zoomed in to about 50ft for this).
1. What is the best format and settings to export a file so that when I zoom in real close (500% to 600% zoom) it doesn't look badly pixelated? I also want it to still have good visuals when I zoom it out to 15% to see the whole map (or most of it.
2. When I export the file as a PNG and open it in maptool to use it as a map some of the objects I placed on it in Xara have either moved slightly or changed size. I am not sure which yet but they look more re-sized than anything. Why and how do I stop this?
3.When I exported the map one time I noticed a building was missing from the original xara file. I went back to recreate it and it was still there, so I assumed I just didn't have it clicked when I exported it. That wasn't the case. The building shows up where I originally drew it but I can't edit or delete it. I can see it, but when I copy and paste or export it into another file the building isn't there.
4. Is it possible to change the units and size of the artboard after the project has been created and worked on for a few days? If so, how?
I tried to move my map project to a new file (after encountering the problem described in #3 above). The original settings were in pixels and is a very huge map. I set the new document in inches (or feet) but I couldn't make the artboard large enough to fit my project. I am not sure how to change from one measurement to another. When I did first save it in another file I could not edit the whole map as my limits are the new document size settings and my project is larger than those settings.
My current export settings are: True color + Alpha. I have removed all the transparency effects as they look horrible in the export so far.
Any easy way to do this or get a plugin that will export as SWF? I did a google check and found some plugin from 2009 that seemed to require the ability to write script and program. Maybe the new version will have this?
View 4 Replies View RelatedI took a .psd file (made by my coworker) and redesigned it. The problem is: he organized his layers so badly...made unnecessary clones. The design is a landing page for a website, now I want to send it to my web developer but he's a linux guy.
So on gimp he can't work on my .psd so well because of color formats. He asked me to cut all the images and turn them to .png. Hence I needed to run File> Script > Export Layers to files once that done I got too many similar .png as you can see (consequences of bad layers organization?)
Do I need to delete unwanted/similar images to make my web dev work easier? Last thing I saw that -in the export layers to files panel properties- transparency and trim boxes was checked and I set it to PNG24.
When I export an Eps file to my other program, the color is off quite a bit, and sometimes changes the color completely. How do I fix this?
View 2 Replies View RelatedProblems with corrupt files when exporting to an EPS.
View 7 Replies View RelatedWhen I export from Inventor professional to an STL file for 3D printing. Everything exports ok except threads. I have a model with M10 and M4 threads which never show on the STL file. Is there an option I need to tick to make sure they convert?
View 9 Replies View RelatedWhen I try to export a shape file (SHP) from Civil 3D, I get to the dialog box on the selection tab and the area that I'm used to seeing that says "Object Type" where you select either Point, Line, Polygon or Text is missing. I can't export the shape files without this option.
View 5 Replies View Related
