what is the command in AutoCAD 2013 for exporting drawings as DWFx files so that clients who do not have AutoCAD can open or plot a DWFx file using a current version of Internet Explorer or Safari for Apple as an alternative browser.
View 2 RepliesHaving issues uploading dwfx files to the 360 cloud?
We have a couple of files that were created from Inventor 2013 as dwfx and when we upload them to the cloud they will not display correctly.
They will display correctly in Design Review on my local system.
I have general question about DWF or DWFx file. Is there a limit number of files or how many MB can viewer open and work without crashing.
I have very well built PC but I have hard time to view DWF file without crashing.
PC spec
Xeon X5690 (3.47 GHz) 2 processor on board
48 GB of ram
SSD drive
Win 7 64 bit
Quadro FX4800 with driver recomend by Autodesk.
I have DWF file around 30,000 parts and the file size 18 to 25 MB.
I can open with 2013 DWF viewer but soon I turn the model it crash.
I change the setting in DWF viewer to Open GL or Software Open GL and it work but the graphic is not friendly rotating it missing a lot of detail.
My customer demand to use the DWF file to review the design and I don't know how to support them.
I try 3D PDF it is bad too.
We have assembly up to 160,000 parts .
Inventor Pro, Inventor Publisher & Vault 2012
Intel(R) Xeon(R) CPU X5690 @3.47GHz (2 processors)
Mem 48.0 GB
OS Win 7 64-bit
Graphic Card: Quadro FX 4800
I have tried to export a DXF model to SAT via the Export option in the File menu. However, I do not see any SAT file generated and there is no message that the export attempt was unsuccessful. How to approach this problem?
View 8 Replies View RelatedI recently upgraded to Map 3d 2010 to Mapd 3d 2013 and i cannot figure out how to find the commands to insert images or import/export shp files.
I'm running 2013 in "autocad classic" and did so with 2010 as well. 2010 had a menu bar pull down called "Map" where I could insert an image (Image->Insert). There was also in 2010 a toolbar named "Map" that had import shp, export shp and assign coordinate system.
I can't find any of this in 2013. I can't even find the commands in the customization to create my own toolbar. The commands work (mapiinsert, mapimport, mapexport and ADESETCRDSYS) but i can't find them listed anywhere.
I get a multiple error message dialogue "Cannot find resource string number XXXX in AeccPublishSVC 100 when exporting a DWFX file of drainage in Civil3d R2014 (I have R2013 open as well).
View 4 Replies View RelatedI created 3D text in Photoshop CS6 and exported the mesh as an obj. I was able to import the obj file directly into 3DS Max 2013, but could not import it into Maya 2013 and 2014, because both versions cited incorrect data. Is this a bug or user error? Obvious workaround is to use Max to re-export, but would prefer to have it work directly in Maya.
View 1 Replies View RelatedI am currently trying to export models into dwfx format for design review and freewheel. However, I have a problem opening the dwfx files that are 16,000 kb in size or higher. How to make the file smaller in Revit.
View 2 Replies View RelatedDoes the exported dwg file always have to be a zip file? I have tried save as a dwg file but it seems to be an Invnetor dwg which has the geometry as a block when opened with AutoCAD. It is a little easier to explode the block in AutoCAD rather than open and extract the zip file, save the extracted dwg then delete the zip file.
View 3 Replies View RelatedDate/Time: 2013-04-07 14:58:28 +0200
OS Version: 10.7.5 (Build 11G63b)
Architecture: x86_64
Report Version: 9
Command: Illustrator
Path: /Applications/Adobe Illustrator CS6/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Version: 723 (16.0.0)
Parent: launchd [132]
PID: 10493
Event: hang
Duration: 0.83s
Steps: 10 (100ms sampling interval)
Pageins: 19
Pageouts: 0
How do you create a block within a layer and set scale to same as other saved symbol blocks.
View 2 Replies View RelatedI have recently updated my template files in Inventor (.idw, .ipt (standard/sheet metal), .iam (standard/weldment)).I added ilogic rules and custom iproperties to them.
I would like to update all my existing files to have these changes so they would be available when we copy design new parts.Is there a way automate the process of updating these files? I have about 4924 of them.
I'm using AutoCAD LT 2013 and I'm having problems inserting .dwg and .dxf files into an existing open dwg. I have previously done this successfully on this computer so I'm pretty sure that I am doing it correctly. What happens is this: I go to insert the file, select it and it shows the correct image in the preview window, but when the actual file inserts into the drawing, it's a completely different file all together. The funny thing is, I have restarted my computer and the program several times, and each time it inserts a different drawing. I have tried inserting a .dwg and .dxf and they both insert the wrong one. I tested it by xrefing the document that I want to put in and it shows up correctly when I xref. I've also tried saving it as a block with the WBLOCK command, and still the wrong thing inserts.
I downloaded the service pack for AutoCAD LT 2013 and nothing has changed.
Existing Inventor files will not open in the same version of Inventor in which they were created on the same pc.
The error message reads 'database schema is newer than this version of software'
A sample file is attached. Is there an answer to this other than having an expensive upgrade???
When I export from Inventor professional to an STL file for 3D printing. Everything exports ok except threads. I have a model with M10 and M4 threads which never show on the STL file. Is there an option I need to tick to make sure they convert?
View 9 Replies View RelatedWhen I try to export a shape file (SHP) from Civil 3D, I get to the dialog box on the selection tab and the area that I'm used to seeing that says "Object Type" where you select either Point, Line, Polygon or Text is missing. I can't export the shape files without this option.
View 5 Replies View RelatedWe just installed the new version of 2012 Product Design Suite. I've spend many hours creating great little ilogic dialog boxes to populate iproperty fields using custom iproperties and then automatically place this data on the .idw file when the view is placed on the new drawing. All works great when the part is created with my new 2012 part template and then placed on my new 2012 idw template. The trouble is with parts that were created with 2011 Inventor. Obviously, the old template does not have the ilogic data built into it. Is there a way to upgrade/migrate the part template file from 2011 to 2012 on an existing part?
I think I'm asking for a miracle here, but I have an assembly with 40-50 parts that I created in 2011 and now need to build the idw files for them and would really like to be able have the customized iproperties added to the existing part files.
For the past couple of months we have noticed we are loosing files on the save command with no warning or notice. When the drawing is saved and then closed we discover that occasionally the file did not save and the original version of the file is lost. Sometimes the original version gets saved as a bak file but not always. No warning message shows up to inform that the command was not completed correctly, it looks like the save took place.
Recently we switched to Windows 7, 64 bit machines. All three machines this has occured on match and are saving back to 2010 version. One of the machines is running a trial version of Architecture 2011, the other two are running network licenses of Architecture 2012 with Service Pack 1. The files being lost are all located on a server in the same folder structure, not in the same folder. That server is new and has some sort of mirroring set up to image files to multiple locations? This phenomenon has only been noticed to occur on saving a file from Architecture. We do save other file types to the same folders and have not noticed any going missing. To my knowlege the files never show back up (one of our IT staff suggested the mirroring might be causing a delay in the file showing up in the folder.)
I have to convert my ACAD drawing to shape files for a GIS user. I have figured out how create a polygon, point or line and add object data with the tables. I have my ACAD drawing setup to the requested coordinate system but when I send them the shape files they are telling me that they get a error in ArchGIS stating "an extent that is not consistent with the associated spatial reference information". I am using Civil 3D 2012.
View 3 Replies View RelatedI have tried to export shape files using the Map --> Tools --> Export function and I am setting up everything that I need to complete the import but I can't seem to get all the files I need. Our GIS expert says that he needs 7 files; the .shp .shx .cpg .dbf .idx .sbn and .sbx. The problem I have is that IM not getting the .sbn or the .sbx files when I go through the export process. Or even if those 2 files I'm not getting are necessary to be able to import the shape files into GIS.
View 3 Replies View RelatedI need to export a .SHP file containing some polygons to a GIS user so he can lay the shapes in a GIS map. The data he needs from me is the outlines of several wetlands I've designed in C3D 2010. There isn't any elevation data associated with the outlines. They are just traced waterlines from each pool set into a layer called "permanent pools." He wants these to show location in a GIS plan.
When I try to MAPEXPORT, and then selct each of my 10 pool outlines, it says "no object selected" in the command line.
I have a customer that wants the .idw file. If I do a save as and ship him the file I know all the links will be broken and won't work right. I remember in AutoCad had a command called Etransit where you can export a drawing and have everything attached to it exported with it so you didn't lose the xrefs, layers, ect.... Does inventor have something like that where I can export the .idw and it'll attach all the .ipt and .iam files to it in like a .zip file?
View 4 Replies View RelatedExporting DWG. Files to Stl in 2011 Autocad
View 2 Replies View RelatedI can use the program and quite happily create components, sub assemblys, and master assemblys.Our company still doesn't have ANY 3D FILES. I have been tasked with eventually creating a full range of end product drawings as Step files. They are wanting BIMS. I see this a step to far atm.....
With the products that manufacture inhouse (industrial / comercial boilers) I have produced each individual component within the boiler to eventually aid to manufacture and bombs to intergrate with SAP.
With doing this every boiler I have done in inventor all the components are there and easily accessable. Am I right in thinking it needs to be exported as a step file to lock everything within the master assembly.
When I have exported it to a step file, when it comes to importing it into an assembly file the components are still accessable when expanded in the menu at the side. Is this because im opening it on my computer or have I done something wrong.....
Can you export files to a format for FEA software.. *.stp etc..
View 2 Replies View RelatedI imported an .stp file into Inventor 2011, saved it as an .ipt, and edited several features. When I export this edited file as an .stp and sent it to a client, they said that the file contained multiple errors: it showed no solid bodies (only surfaces), and the 3D thread feature I created (using a thread cutter and Inventor "Coil" command) did not read correctly (the thread I created was an edit of a previous thread, and apparently the .stp file simultaneously showed the new thread and the old, unedited threads).
Creating an assembly (.iam) and shrinkwrapping it before exporting as an .stp does not work.
(When I open the stp file I created [in Inventor] the file, of course, reads correctly. All solid bodies are visible, as well as the single thread.)
How to export an .stp so that it reads correctly in SolidWorks?
Within our company we use Inventor 2012 (Ultimate and Premium). We are looking to use a radiation shield calculating package called Attila from a company called Transpire Inc. This Attila software expects to receive files for import as parasolid files.
I am asking because the supplier seems to prefer Solidworks to Inventor from a support perspective even though they do say they support other 3D CAD applications.
I need to export my IDW drawings to DXF.
As long there are lot of files I wish the Task Scheduler will do that job.
It actually does but only with "File" option. I mean I cannot take a whole Folder
since there is no DXF option and should click each file and set the DXF there.
The second big problem it returns zipped DXF files, I cannot get rid of that.
I've created two similar but different base files.
I've derived each into parts that have a few different features.
In both cases, step exports of the base solid are fine but exports of the unique parts are empty.
Step exports of their assemblies are complete except for these parts.
Sat exports work fine for both parts and assemblies.
It happens in 2012 SP2 and 2013.
We are having an issue with CS4 and CS6 with a couple of users who are using Windows 7 64bit. Previously the users were using CS4 on Windows XP 32 bit.
The program seems to open ok and the user is able to create, save and open new files, the issue seems to be when the users try to open files that they previously created. The behavior they see is that the files take between 5 and 10 mins to open (even if stored locally) and the programs hangs when they then try to do anything with the files.
The are using the same hardware, the only difference being that the OS has been migrated to Windows 7 64 bit. CS4 and CS6 were then installed cleanly onto the machines.The users have the same issue with both CS4 and CS6 with their existing files.
I have several hundred videos I have taken, either with a Canon SD800, Canon S95, Canon T2i or a GoPro.
New videos I take on this equipment works just fine when adding to Lightroom. But when I try to import older files, I get error: video file not imported with the quantity in parenthesis.
I have tried purging the video cache, I have tried task manager - disabling dynamiclinkmanager and dynamiclinkmediaserver. Occasionally I will be able to import one or two videos after doing this but then it hangs up again.
Running Win7, LR4.1.
I don't have anything else up and running when I do this.