Having issues uploading dwfx files to the 360 cloud?
We have a couple of files that were created from Inventor 2013 as dwfx and when we upload them to the cloud they will not display correctly.
They will display correctly in Design Review on my local system.
I am not able to upload my files in my creative cloud into photoshop. I don't see the apps on te right side, but my it shows that photoshop is downloaded. Creative cloud is on my desktop, but when I open it I jut see a list of products downloaded.
View 1 Replies View RelatedI have general question about DWF or DWFx file. Is there a limit number of files or how many MB can viewer open and work without crashing.
I have very well built PC but I have hard time to view DWF file without crashing.
PC spec
Xeon X5690 (3.47 GHz) 2 processor on board
48 GB of ram
SSD drive
Win 7 64 bit
Quadro FX4800 with driver recomend by Autodesk.
I have DWF file around 30,000 parts and the file size 18 to 25 MB.
I can open with 2013 DWF viewer but soon I turn the model it crash.
I change the setting in DWF viewer to Open GL or Software Open GL and it work but the graphic is not friendly rotating it missing a lot of detail.
My customer demand to use the DWF file to review the design and I don't know how to support them.
I try 3D PDF it is bad too.
We have assembly up to 160,000 parts .
Inventor Pro, Inventor Publisher & Vault 2012
Intel(R) Xeon(R) CPU X5690 @3.47GHz (2 processors)
Mem 48.0 GB
OS Win 7 64-bit
Graphic Card: Quadro FX 4800
what is the command in AutoCAD 2013 for exporting drawings as DWFx files so that clients who do not have AutoCAD can open or plot a DWFx file using a current version of Internet Explorer or Safari for Apple as an alternative browser.
View 2 Replies View RelatedLink for DWFX
This is a link for a dwfx file (Scroll down below)
I can open this is IE9. can you?
I thought that dwfx is for everyone to open & view including people with out IV. I am trying to open this in my home laptop (No iv)
C1
Inventor Professional 2013
Vault Collaboration 2013
Is it possible to render Inventor files in the cloud?
View 1 Replies View RelatedI dont use rev cloud much so I dont miss it - Till I want to use it!!
I remeber there was a hoop on the last release to get it to work. Why is there a hoop? Could we just have the tool there ready to use with out the hoop(s)? Is the revcloud dead in Invetor 2012?
I am trying to share documents with outside vendors using the Autodesk Cloud services. I have successfully uploaded files but, out of the six people I have shared the files with, only 3 of them can actually see the files.
My question is this: If I send an invitation to view the shared document to a person whose e-mail address is, "john.smith@HisEmail.com" does John have to use that exact e-mail as his official user name when registering with the Cloud or can he use any user name he wants to?
I am new to this program, but just designed something lovely. However, once I pull it into Photoshop, save it in the size and type of file I want, and then go to upload it to my website where I sell my prints, the colors are all off! Some don't show up at all, and the others have turned neon... what is happening? How do I fix this?
View 1 Replies View RelatedOn a pro account, Vimeo has no time limits. Yet using the tool to upload to Vimeo in VS X4 forces a trim to 25 minutes. Is there a work around? Is there any way to replicate the settings on the Vimeo upload without the time limit? I can't seem to find a way to replicate the Vimeo upload settings using the custom portion, or the mp4 HD portion of the share tab.
View 2 Replies View RelatedAll metadata was lost when files were uploaded and sent. By metadata I mean image captions and keywords. I inserted metadata via Image - Properties - Comments while in GIMP xcf, saved files to JPEG, and uploaded. Metadata looked OK in JPEG before uploading and is still there in my files, but didn't survive the upload.
View 3 Replies View RelatedElements 11 won't upload raw files from a Nikon D600, I've read the various comments ref Camera Raw Plugins and I've downloaded DNG 7.3 but don't know where to put it. Is DNG 7.3 the same as Camera Raw Plugin 7.3? I have read also that maybe Elements 11 doesn't support 7.3 so may need to use 7.2.
View 2 Replies View RelatedI have an external hard drive that I downloaded all my pictures of then I edit them. Now since they are in a different format and the end of the file extension says psd it isn't in jpeg so shutterfly or mpix wont take them for download so I can get copies made?
View 1 Replies View RelatedI have a Canon PowerShot camer and make videos using .avi. I just bought the Premiere Elements 11. Befoer I bought the program I made sure that it said it would work with .avi files. When I try to upload an avi it says "This type of file is not supported, or the required codec is not installed".
How do I obain and install the required codec? I have already loaded up all the software that came with the camer, and that software works fine; I assume it already has the required codec. But how can I get Elements to use the codec?
I have photoshop elements 10 and a Canon SL1 camera. My friend has photoshope elements 12 and the same camera. She can "open in RAW" under her drop down "file" menu but I don't find that in my elements 10 program? What gives? How do I open my RAW files in photoshop elements 10?
View 2 Replies View RelatedI am having a new issue with my Lightoom (4) Suddenly, every time I try to upload photos into Lightroom, I get a "Files Cannot be Read" message. I have never had this problem before. SOmetimes it will upload a few out of the bunch, but not all of them. I have tried to change all my permissions settings to "Read & Write" but am still not having any luck. It seems that it works sometimes, but mostly not.
View 13 Replies View RelatedWhen I upload image files to my computer hardrive, they open directly into Lightroom 5. How can i prevent this?
View 1 Replies View RelatedSaved file appears to load aerial image tiles, but after automatic loading of shape files, images no longer visible. I am new user, how do I fix without having to delete and reload image files?
View 3 Replies View RelatedI have created a new property set definition and added two manual property definitions and applied this to all objects. Every object on the drawings has distinct values for these two properties. These property values show correctly on the Extended Data tab of the Properties palette.
I have published to DWFX with AEC property set data set to 'Include'. In the resulting DWFX in Autodesk Design Review I can select each object and see the standard properties but not my special property set data.
while i am trying to load my point cloud files the points appeared in the model but not all points
i entered to the setting of the point cloud from the toolspace toolbar , i found that there are about 32 million points but only 700000 points are displayed in the drawing. Is there a way to display all the loaded points in my drawing to show all the points since i need to render a high resolution pictures for my lots.
I get a multiple error message dialogue "Cannot find resource string number XXXX in AeccPublishSVC 100 when exporting a DWFX file of drainage in Civil3d R2014 (I have R2013 open as well).
View 4 Replies View RelatedDownloaded the on-line trial version of Revit LT 2014. I want to open/convert old .dwg files I have on my PC to play around with, but since it's an on-line version, I don't know how to get those files into the cloud.
View 1 Replies View RelatedI am currently trying to export models into dwfx format for design review and freewheel. However, I have a problem opening the dwfx files that are 16,000 kb in size or higher. How to make the file smaller in Revit.
View 2 Replies View RelatedThe app manager shows it has updates and when I start the update it tells me to quit app manager which in turn terminates the update download.
View 2 Replies View RelatedI have 3d scan of aircraft door frame (see attach) in point cloud format. I'd like to overlap 5 different frames and construct a new 6th frame by averaging out all of the points.
At the moment, the 3d data files has no surface and I'm unsure if adding surface with the construction of the 6th frame. I will also need to take into consider alignment, point density, and orientation when overlapping all of the frames before I can start work to average all points (Note: each scan are taken from 5 different vehicle).
I have both Rhino3D and Autodesk Alias Design 2012. What are the logical steps to do in this case?
Im running Inventor 2012 on a 64 bit windows 7 machine.
Having just newly discovered that Inventor has a Revision Cloud command, I read through the forums and found out that I had to install the two SKD .msi files named DeveloperTools & UserTools, which I have done. I also read that I have to execute the RegisterGeneralTools.exe which I have also done. I've rebooted and restarted Inventor numerous times thinking that my Add-Ins tab will show up with my newly acquired Revision Cloud command in Drawing Tools but to no avail.
Im coming from Inventor 2009 so I'm not sure if the Add-Ins tab is now supposed to be the Add-In Manger but from what I seen I should have a tab just right of "Get Started" and should include Drawing Tools and General Tools.
Is it possible to set up a project in inventor that when you save it locally it will also c to the 360 cloud location?Or must you set up a project with save paths directly to local 360 partition? Then syncing is done automatically from there?
View 1 Replies View RelatedAny (simple) raw point cloud data file.
View 2 Replies View RelatedStarting a drawing which now needs a revision. Can't for the life of me find a revision cloud tool to mark up a change. This is the feature in SW [URL].......
View 1 Replies View RelatedUsing Revit Architecture 2013 with Update 1 on a Windows 7 32 bit system. I've rendered successfully in the past ( a month ago, as I recall) and then, as I continued working on hte model, the ability was gone.
I receive either the files could not be uploaded or the files could not be translated errors each time. It's quite frustrating. I love this product, but I am in grief becuase of this.
I've tried all the suggested remedies in the book: Logged in and out from Revit, cleared the firefox cookies and cache (used ccleaner) logged in and out of the 360 account on the web and said my prayers. Several times. I even uninstalled and reinstalled Revit on a different computer, to no avail.
Since other models render perfectly, I suspect a problem with the model.
I have few terabytes of photo's that are cataloged in lightroom. Only a few hundred gig are photo's that I rated 3-5 stars and are the only ones that I would want to be 100% certain I don't loose in a perfect storm data loss scenario.
I currently use windows 7 import everything into one master folder for my catalog, then sort and rate them all. Is there any way to direct lightroom to separate all photo's with a 3-5 star rating on my actual hard drive into a separate folder or duplicate them into another folder for cloud back-up? I've tried showing the rating column in window, but it doesn't seem to bring my lightroom star ratings into windows.