Saved file appears to load aerial image tiles, but after automatic loading of shape files, images no longer visible. I am new user, how do I fix without having to delete and reload image files?
View 3 RepliesLink for DWFX
This is a link for a dwfx file (Scroll down below)
I can open this is IE9. can you?
I thought that dwfx is for everyone to open & view including people with out IV. I am trying to open this in my home laptop (No iv)
C1
Inventor Professional 2013
Vault Collaboration 2013
I have general question about DWF or DWFx file. Is there a limit number of files or how many MB can viewer open and work without crashing.
I have very well built PC but I have hard time to view DWF file without crashing.
PC spec
Xeon X5690 (3.47 GHz) 2 processor on board
48 GB of ram
SSD drive
Win 7 64 bit
Quadro FX4800 with driver recomend by Autodesk.
I have DWF file around 30,000 parts and the file size 18 to 25 MB.
I can open with 2013 DWF viewer but soon I turn the model it crash.
I change the setting in DWF viewer to Open GL or Software Open GL and it work but the graphic is not friendly rotating it missing a lot of detail.
My customer demand to use the DWF file to review the design and I don't know how to support them.
I try 3D PDF it is bad too.
We have assembly up to 160,000 parts .
Inventor Pro, Inventor Publisher & Vault 2012
Intel(R) Xeon(R) CPU X5690 @3.47GHz (2 processors)
Mem 48.0 GB
OS Win 7 64-bit
Graphic Card: Quadro FX 4800
I have some PDF files whose images are not visible as I go through the steps to open them. The steps are File > Open > select file in drop-down box > click on Open > see empty image in Import from PDF box > click on Select All > Import. The import process takes a few seconds and the editing box appears with a blank image. The size of the box matches the number of pixels shown in the import box, but no image is visible. What can I do to change the color or visibility of the pixels? Other PDF files import correctly using the same process.
View 9 Replies View RelatedHow do you make an image (JPEG) visible again after you turned it off with the contextural Image Ribbon Menu?
Once the image is gone I cannot find how to get the contedxtural Image Menu back.
Inventor Suite 2013 Ultimate
Having issues uploading dwfx files to the 360 cloud?
We have a couple of files that were created from Inventor 2013 as dwfx and when we upload them to the cloud they will not display correctly.
They will display correctly in Design Review on my local system.
I have created a new property set definition and added two manual property definitions and applied this to all objects. Every object on the drawings has distinct values for these two properties. These property values show correctly on the Extended Data tab of the Properties palette.
I have published to DWFX with AEC property set data set to 'Include'. In the resulting DWFX in Autodesk Design Review I can select each object and see the standard properties but not my special property set data.
I get a multiple error message dialogue "Cannot find resource string number XXXX in AeccPublishSVC 100 when exporting a DWFX file of drainage in Civil3d R2014 (I have R2013 open as well).
View 4 Replies View RelatedI have 1 auto cad file & i am not able to see Russian font on that drawing
View 9 Replies View RelatedFor some reason I have not been able to generate a pdf file with visible lines fro the attached file.
View 9 Replies View RelatedI am currently trying to export models into dwfx format for design review and freewheel. However, I have a problem opening the dwfx files that are 16,000 kb in size or higher. How to make the file smaller in Revit.
View 2 Replies View Related I have several .dwg files from an architect each with several hundred layers. I set up a Layer State in one drawing with just the layers I need. I want to use the same Layer State in the other drawings. I opened the Layer States Manager, selected my layer state, and clicked export, selected a location and closed the window.
I double checked in the file manager in Windows 7 that the .las file was where I had exported it. Then I opened the next .dwg, opened Layer States Manager, navigated to the file location and the .las file does not show up.
When I go back to the original drawing and click Import, the .las file is not visible either, but it is if I click Export.I am working on drawings on my hard drive not a network, and saving the .las file to my hard drive.
How do I Load CUI File (Ribbon Tabs) And Make Visible via .NET?
I know how to load a cui file, I know how to make a Ribbon... but how do I load a CUI file and then make the ribbon visible via code?
.NET Code or Refernce to the correct objects and properties would sure work.
How to set the drawing file path so it shows up at the top of my screen when I am in an autocad session? Currently all I see is "Autocad Civil 3D".......
View 5 Replies View RelatedMy .ipt file has a shared sketch that is visible and not adaptive.
But When I attempt to make a second extrusion from the sketch, a message says, "No visible, unadaptive sketches".
I could create another sketch, but I want to learn how Inventor is working because I have had this error before.
The file is attached (I am trying to extrude from the "binder" sketch).
When I publish a drawing as a multipage DWFx (or PDF for that matter) with "Include Layer Information" selected, the Plot Stamp (Simple Date/Time and Text) comes out but on different layers on different layouts.
Example:
First Layout : Plotstamp resides on Layer 0
Second Layout: Plotstamp resides on Layer 3P
Third Layout: EQPT-VC
etc
Some general information:
Autodesk AutoCAD 2011 64bit
Autodesk DesignReview - 2012
Adobe Acrobat X Professional
Layer 0 Is thawed/plotable and on in all layouts, viewports all layers, viewports. It has at least one entity per layout
Is there anyway to rectify this and still use the built-in Plot Stamp?
what is the command in AutoCAD 2013 for exporting drawings as DWFx files so that clients who do not have AutoCAD can open or plot a DWFx file using a current version of Internet Explorer or Safari for Apple as an alternative browser.
View 2 Replies View RelatedSo far, "stamp visible" was useful to create a flattened version of the image to use in liquify, etc.
This feature suddenly stopped working.
What I get from performing the "stamp visible" shortcut (Command option shift e) is a lighter image than the original image.
I restarted Photoshop, but the bug doesn't get away: "stamp visible" no longer works.
What are my options here?
whats the difference between these 2,flatten image and merge visible, and is it necessary to do this before saving it to a jpeg or something?
View 2 Replies View Relatedfirst post from relatively new user of Gimp 2.6.7 on Vista.
I'd like to be able to quickly fit the image to the visible layers -- usually just one layer, in fact. I'm currently doing it by drawing a rough marquee and then correcting it at high magnification before using Fit Canvas to Selection, but there must be a better way! :roll:
I'm trying to apply a stroke to a .jpg image in Illustrator 6, and even though the weight and color show in the windows, the object itself has no visible stroke.
View 3 Replies View RelatedCan anybody tell me the difference between Merge Visible and Flatten Image?
View 1 Replies View RelatedPS10. when using the organizer I clicked on full edit saved the file. The file is no longer visible in the organizer. File icon shows a broken file. It is visible with other prgms. I can see the edited file say in Win explorer etc.
View 1 Replies View RelatedI created a file in .psd, with several text layers to which I applied effects (fx) such as stroke, bevel & emboss, outer glow. When I flatten the image, the outer glow and stroke remain, but the bevel & emboss effect is gone. Type is a single color without the 3 dimensional effect.
I am also not able to preserve the bevel & emboss look when saving as a jpeg or a flattened .tif or .pdf. A saved .tif or .pdf with layers shows the effect just fine, but if the pdf is opened with Acrobat instead of Photoshop, the effect is not visible.
This must be a new problem, because I found a file that I created several years ago that is a flattened .tif with the bevel & emboss effect preserved.
I tried rasterizing the layer, and the type. Tried converting to 16 bit changing mode to CMYK, and multi-channel. Everything that involved merging layers lost the bevel & emboss effect.
With automatic windows update 12/12/12 problem with fonts type T1, which are used in a document, suddenly no longer visible even after Save Image in PDF, but present on the document.
So when you format text in t1 long distance, for the update windows then this is visible, then no longer visible, but there was still. only way to solve computer back to earlier restore point, then everything is fine again.
I cant seem to snap to guide intersections when a linked jpeg file is visible. It works fine when I turn off the visibility of the layer the file is on but I am trying to "trace" over the image with line segments. I know that I have been able to do this in the past but for some reason it is not working now. Im sure that I have accidentally changed something but don't know what.
View 6 Replies View RelatedI have been working on a script to place a psd file onto only one visible layer (document has multiple hidden layers). This java code has worked so far:
var doc = app.activeDocument;
var onFile = File("C:/Users/Desktop/Desktop/ExportedArtboard-01.psd");
var mydoc = doc.placedItems.add();
mydoc.file = onFile;
mydoc.embed();
however this works with only the top layer visible (eye turned on in Ai). if top most layer isn't visible i get "target layer cannot be modified" error.
For instance say i have 1,2,3 layers. layer 1 (top most) and 3 (bottom most) would be hidden, layer 2 (middle layer) would be visible and then running the script would place the psd file on to layer 2.
I need to remove the background image which is visible through a stained glass window and replace it with a soft plain background (simulating an ambient light)
I don't really want to artificially recreate the lead grid design and wondered what's the best technique (masking or otherwise) to preserve this detail? I am considering clone stamp, intelligent fill, masking etc. but first I need to create a source of the grid to use.
I need to get the visible portion of a particular layer in the final image.Lets say i have 4 layers and some portion of each layer is visible in the flattened image i would like to get the portion from each of the layers. The input will be in xcvf format.I will ideally want to automate this and output to file in some format looking like this,
Layer1 ---> Co-ordinates of visible polygon from this particular layer in the image .
Layer2 ---> And so on.
How to proceed with the script. I think brute force is to take each non-transparent pixel and and find the same pixel in all above layers if it is not found it will be added to the region.Or something exists like selection from alpha combined with multiple layers ?
Or if there is a way to find out for an image with all layers visible which pixel came from which layer ?
I want to attach image in Autocad 2010, i know the procedure to insert the image (.jpg,etc.). But my problem is that i dont want to send its original image that i used from my hard disk.
Is there any way to send drawing without sending its image file or wothout doing etransmit the file.
We have a couple parts that are linked to a jpg file, through Inventor studio. They were set as a reflection image, from what I can tell. However they are now perminantly linked to the part and anything we copy from it. I eliminated the reflection from Inventor studio, but Vault still thinks the link is there. If we delete the jpg files it causes unresolved references and as we all know Inventor will then refuse to work until they are resolved.
Any way to get rid of this link? We can make a new jpg, and resolve it, but not delete it.