AutoCAD Inventor :: JPG File - Delete Third Party Image File Link?
Jun 12, 2012
We have a couple parts that are linked to a jpg file, through Inventor studio. They were set as a reflection image, from what I can tell. However they are now perminantly linked to the part and anything we copy from it. I eliminated the reflection from Inventor studio, but Vault still thinks the link is there. If we delete the jpg files it causes unresolved references and as we all know Inventor will then refuse to work until they are resolved.
Any way to get rid of this link? We can make a new jpg, and resolve it, but not delete it.
View 9 Replies
ADVERTISEMENT
Jul 29, 2011
How do I delete a missing, unwanted linked file from an AI file? The referenced link is completely gone and is not needed. It can't be relinked or removed since it no longer exists. It is has been a phantom for as long as I have been using the AI file and I would like to clear the "Could not find the linked file" pop up every time I load the AI file.
View 10 Replies
View Related
Jul 6, 2012
Is it possible to link one part file dimension to another part file?
1. Part first is a cylinder in parametric table i changed it,s name OD , ID and thk. ( find attachment )
Cylinder ID is ( ID=105)
2. Then i made 2 nd part whose step od ( od=102) is going to insert in to cylinder id.There is 3 mm clerance every time
3. So i have to make equction in 2 nd part that ( Step OD= ( ID-3).
means next time when i will change ID of cylinder OD of 2 nd part will ger changed automatically minus by 3 mm than id of cylinder.
View 3 Replies
View Related
Oct 20, 2011
Say we needed a similar assembly under the same file with a few modifications, like a guardrail for instance. All I have ever had to do was copy the folder with the assembly and parts in it and rename the folder and assembly to change the link to another folder. Opening the assembly quickly prompts me for a part or two in the new folder then I am good to go. A coworker of mine who runs the same computer and version of Inventor never gets that request. When the assembly is opened in the new folder it automatically links it back to the previous file regardless of changing the folder etc.
Inventor 2011
OS Windows 7
8GB
Inventor 2011
Intel Core 2 Duo 2.93GHz
8GB RAM
Windows 7 Pro
View 2 Replies
View Related
Apr 3, 2012
I want to import the parameters from the .ipt file into the .iam file using a rule from iLogic (unless there is another way to do it?)
I pinched the code from the example hand rail iLogic part that comes with inventor and tweaked it to suit. After inputting the code shown in the image, when I click OK I get a 'fatal error' of some sort.
View 6 Replies
View Related
Aug 7, 2013
I have facing issue to link the ipart members in to the new part.
for example, i have one machining part that machining part showing make from number. so, i created make from first. it has 10 instance.using iPART i created 10 members.after that i need to be do the machining.machining drawing also having 10 members. How i call the each make from members in to the machining model.
View 7 Replies
View Related
Jun 25, 2012
I have created parts made up of a smaller parts themselves, them multiple assemblies of different parts that are all used in a final asembly. Now I need to give this whole assembly to someone. I tried sending all the files together with the assembly. However, when the receiver tried to open the assembly, most of the file references could not be resolved and inventor asked for the path of each, which would take too long to do. Is there any way around this?
View 1 Replies
View Related
Jun 7, 2013
I'm in the process of modifying our materials.xml file within the: Style and Standard Editor [Library - Read/Write]I can add materials no problem but:
* When I make an attempt to rename a material, a new material is created with the new name, and the material I attempted to rename is still there with the old name.
* 90% of the time "purge style" is grayed out. When I have the chance to use "purge style" it doesn't work. Purge style and sub-styles doesn't work either.
How do you delete materials from materials.xml?
View 5 Replies
View Related
Aug 22, 2012
Working code ...... attaching file
Auto = iLogicVb.Automation
Dim iLogicAuto As Object
iLogicAuto = Auto
Dim oDoc As Document
oDoc = ThisApplication.ActiveDocument
[Code]...
'but now something more i wanna do is...... delete parameters
If Not (param Is Nothing) Then
For Each param In params
i = MessageBox.Show("Checking for Parameter in File")
i = MessageBox.Show("No.of Parameters exists are ="& param.count)
[Code]....
View 5 Replies
View Related
Nov 28, 2012
in my Link window I still see the linke to an image that i have as embedded as well. How do I delete the link ? I didn't see a delete function in the link window, respectively in the dropdown of the window.
View 2 Replies
View Related
Mar 14, 2011
I try to delete one of version of the file on vault server. When i right-click and delete, it delete all version and original file too.
View 9 Replies
View Related
Oct 23, 2013
Is there any way using ilogic to find a value in an excel file and delete the column that value was found in?
View 1 Replies
View Related
Dec 26, 2011
I'm messing around with tables and data links, practicing. I copied a range of cells in Excel, and did paste special to create a linked table.
Now I can delete the table object, but I cannot delete the link, cannot detach it.
When in Data Manager if I right click on the data link and click delete I get the error message "The data link is being used and cannot be deleted".
I have tried detaching, and the detach does not seem to take.
Now also, the table will not update from the source xls.
Win XP, AcadLT 2011, Office 2010. Using compatible setting for saving spreadsheet, for Office 2007 (not xlsx).
If I create a linked table by starting with the Table icon, choose "from a data link", choose the excel spreadsheet, etc., then I am able to later update the table from the spreadsheet, detach, delete the link, etc. But I can only delete the link if the table is not selected when I open the Data Link Manager.
But the one that was created following the directions from the Autocad video, with the copy, paste special, that link will not detach nor delete.
View 5 Replies
View Related
Jul 19, 2013
I have a shrinkwrapped file. Now the link is broken from the actual assembly and the orginal assembly is now gone. Now in this shrinkwrapped file, there is a portion that I want to isolate. Is there any way to delete / remove the other parts that i dont need? Extruding, sculpting and delete faces dont work. So far the only thing I can do is add extrusions to the part but not remove.
View 1 Replies
View Related
Dec 8, 2013
I have to reuse a old ai file with a linked file and make some modification. But I don't need the linked file in my revised ai file.
how to delete the linked file, so that I need not to click "ignore" button on the pop-up box of reminding me unable to find the linked file when I open the new ai file each time.
View 3 Replies
View Related
Mar 29, 2012
I'm working on at a much higher resolution in another file. Do I have to place it every time I want to update the first file, or can I link it to update automatically, like when a photoshop file is placed within Illustrator?
View 5 Replies
View Related
Jun 22, 2012
When i try to delete a file from LR using the delete from disk option the file does not so up in my trash. I have deleted 200 bad files and the never showed up in the trash. I have been trying to clear up some disk space but the available disk still shows the same so I know they haven't been deleted. Am using Lion on a MacBook Pro 15 and am fully updated. Am I doing something wrong?
View 2 Replies
View Related
Oct 8, 2013
I have been trying to understand how to get from a ***.docx file to ***.xaml and then link that into my project.
Is it a simple matter of saving a html somehow or am I missing the boat?
View 9 Replies
View Related
Dec 8, 2011
I want to attach image in Autocad 2010, i know the procedure to insert the image (.jpg,etc.). But my problem is that i dont want to send its original image that i used from my hard disk.
Is there any way to send drawing without sending its image file or wothout doing etransmit the file.
View 1 Replies
View Related
Feb 19, 2012
I saw this feature in a drawing but can not figure out how:
Within a text box is linked to the file name, if I close and rename, when I open the file name is his name changed into the drawing with DWG extension including. How do I do this?
View 3 Replies
View Related
Jul 19, 2012
Is it possible to link a vport to another drawing file?
View 5 Replies
View Related
Apr 8, 2013
Is There any way to Merge Image file With Drawing File ? I Have a Topo Sheet Which i am Inserted in Drawing File . Now the Problem is i am sending Drawing file to My Client Office Via Email . The Toposheet File Sized Is Nearly 150 MB . Is there any way to Combine Image and Drawing File.
View 4 Replies
View Related
Oct 1, 2013
If I place a link to a dwg as a hyperlink in an Excel file, AutoCAD freezes. It opens the drawing, then AutoCAD is completely locked. I have to close it through task manager.
This has been tested wih multiple drawings and excel file and it happens in all of them. I'm using Excel 2010 and AutoCAD 2010.
Win7 x64 - 16gb ram
i7 3610qm
FirePro M4000
Inventor 2013
ETO 6.1
View 4 Replies
View Related
Apr 13, 2012
I am looking into using the Survey Database for the first time and noticed it linked back to the imported file from which the points came. However, my question is when the points are adjusted within the AutoCAD file is there a way for this adjustment to link back into the imported point file. I am trying not to have a situation where the data is different between the imported file and the autocad file.
View 3 Replies
View Related
Mar 18, 2013
I think this should be an easy thing to do, but I am having problems figuring it out. I need to repath the location of a point file being used in a surface. My surface will not rebuild because it can't find the point file originally used. Drawing was used on a different computer system, so the point file directory is now pointed to the wrong path.
View 7 Replies
View Related
Feb 19, 2012
LISP code to link to a scr.file.I would like to run ACADDOC.lsp with abobe code everytime I open a drawing.But I want to link the KISP file to script file of mine like C:
View 3 Replies
View Related
Apr 8, 2008
inserting or adding an image to the drawing file.. i ve the reference point and the bmp file path.. but the error "Run-time error '-2147467259(80004005) Method 'Add' of object '_IRxSketchImages' failed" is flashed.
View 6 Replies
View Related
Aug 23, 2010
I am having trouble inserting a JPEG image in Inventor 2011 LT drawing (DWG) file. The Image button on Insert panel under Manage tab is always disabled. I am able to bring in the image using Insert Object feature and selecting 'create from file' option. Although the resulting image looks OK on the screen, it looks inverted and distorted when printed.
I am facing the same problem when I try to insert image in a dwg sketch, however, the process works as expected on part sketches.
View 8 Replies
View Related
Jan 4, 2012
Several times when closing an IDW the image of the file reamains on the screen. The Tab for the file in the lower left hand corner dissapears but the image stil remains on the screen. You have to navigate to another open invnetor file in order for this image to dissapear. If you are not paying close attention you can inadvertantly close several files by repeatedly trying to close the "image" that is still on the screen. I am only seeing this on one of our workstations. Coulod this be a video card error or a setting?
View 8 Replies
View Related
Dec 14, 2012
I have a .png file that I want to place in a template. This png file is text with a transparent background. When I place this in my template, the background is shown in white. The sheet color the idw is beige, so this doesn't look very good.
Also, when I save a copy of the idw as .dwg, the white background is shown there as well. when it prints, it is ok. If there was a way to have it stay transparent in both?
View 3 Replies
View Related
Nov 28, 2010
When I start a new document or open a file in Inventor, I get a pop up saying: "Cannot read texture image C:UseerspublicDocumentsAutodeskInventor 2011TexturesChrome.dds" I moved the whole Autodesk file and changed all paths under settings>files in Inventor. The new path to Chrome.dds is C:UsersKajDocumentsAutodeskInventor 2011TexturesChrome.dds
View 3 Replies
View Related
