I want to import the parameters from the .ipt file into the .iam file using a rule from iLogic (unless there is another way to do it?)
I pinched the code from the example hand rail iLogic part that comes with inventor and tweaked it to suit. After inputting the code shown in the image, when I click OK I get a 'fatal error' of some sort.
I am trying to enter some material ordering info into an external spreadsheet, and have that info reflected in a text box within an idw drawing file.
My method is as follows:
Obtain a numerical value (250) from an external Excel spreadsheet (sample.xlsx).Assign this value to a parameter (abc) in an idw file (Materials Ordering.idw).Insert parameter abc I made into a text box within the same idw file.
I made a set_parameters rule, and the ilogic text of the above example is as follows:
'Open File and Scan line - Part = Impeller Casing Flange
i = GoExcel.FindRow("sample.xlsx", "Sheet1", "Part", "<=", "Impeller Casing Flange")
'abc = Material Width
abc = GoExcel.CurrentRowValue("Material Width")
I had no problems with the first two steps, after checking the parameters I could see that parameter abc is being updated successfully.
However, I am having trouble with the third step. In the format text dialog box, I can see a drop box for components, but I can't find a reference to the idw file in there.
My question is, am I going the wrong way about this? Should I have assigned the parameters to a component instead of the idw file?
Working code ...... attaching file
Auto = iLogicVb.Automation
Dim iLogicAuto As Object
iLogicAuto = Auto
Dim oDoc As Document
oDoc = ThisApplication.ActiveDocument
[Code]...
'but now something more i wanna do is...... delete parameters
If Not (param Is Nothing) Then
For Each param In params
i = MessageBox.Show("Checking for Parameter in File")
i = MessageBox.Show("No.of Parameters exists are ="& param.count)
[Code]....
I made 2 parts, c cylinder and a plate with a hole, and tried linked the Diameter parameter in the Cylinder file.
First, i chose the Diameter, in the link dialog box, but the new user parameter that was inserted was the file name only.
Secondly, when i activate the Hole parameter in the plate file and select List Parameters in the Equation column, i see only the Hole parameter, not the new one, the Diameter, which i tried to link.
So, the link doesn't work.
But, i have, also, a general question: why do i see, in both files, in the List Parameters dialog, only the parameters which i changed their names? i expected to see all the parameters of the part, no?
I am making an assembly where I wanted to use an excel sheet to link common paramters between the parts. I know how to do it for just my single system, but I am wanting to have all the parts and the excel sheet stored in my vault server. Is there anyway to link the parameter list to the excel file stored in the vault or how can I go about having a common file that everybody can access.
What I am worried about is if the excel file is located on my computer and someone tries to open a part on another machine, it will not find the excel parameters and everything crash.
I tried to match the dimensions of the already existing product with new dimension through fx parameters(using link excel sheet), while conversion all the dimensions are changed except taper value (By default it comes with inch instead of degrees) It can be changed by adding user parameter but i want it to consider from excel sheet data itself. Is it possible? For reference i have attached the snap shots
View 1 Replies View RelatedI'm having some difficulties with iLogic and reference parameters.
I have made a tube with a weird shape and I want to measure the longest length. So I have to cut the tube in a certain angle in relation with the center to measure the length.
The problem is that this angle is really hard to calculate.
So I tried making a rule where I can make my angle shift x degree and then measure the longest length. If the measurement is larger the previous measurement the angle will shift x degree again until the measurement is smaller than the previous.
So I made my starting angle 0 degree, I know this is for a fact not the longest length. And then I tried this rule. (before making a While rule).
And I noticed that on screen the measurement changes. But the reference - parameter stays the same. So it gives me the measurement on the starting angle & after rotating it again gives me the starting angle.
How can I get the parameter to update itself in between?
Dim measurement_length As DoubleDim measurement_length2 As DoubleMessageBox.Show("Start angle ", "My iLogic Dialog", MessageBoxButtons.OK, MessageBoxIcon.Asterisk, MessageBoxDefaultButton.Button1)angle_measurement_spec = 0RuleParametersOutput()InventorVb.DocumentUpdate()measurement_length = [code].....
I would like to save parameters marked as Key to an XML-file (from an Inventor addin, VB.NET):
Dim addIn As ApplicationAddIn = m_inventorApp.ApplicationAddIns.ItemById("{3bdd8d79-2179-4b11-8a5a-257b1c0263ac}") 'iLogic addin addIn.Activate() Dim iLogicAddin As Object = addIn.Automation iLogicAddin.ParametersXmlSave(invDoc, "c: emp ext.xml", iLogicAddin.XmlSaveOption.KeysOnly)
This doesn't run: "Public member 'XmlSaveOption' on type 'iLogicAutomation' not found."
The documentation says:
Autodesk.iLogic.Interfaces.IiLogicAutomation.ParametersXmlSave(Inventor.Document,System.String,Autodesk.iLogic.Interfaces.XmlSaveOption)
What is the correct syntax to get the XmlSaveOption?
In the attached file there is a User Parameter, "Antal_ledekasser". Inventor has calculated its value to 2.
If you do the math by hand then you see the value should be 5.
Rebuild doesn't force recalculation.
There is an iLogic rule in the part, but this also fails to force recalculation:
iLogicVb.UpdateWhenDone=True
InventorVb.DocumentUpdate()
ThisDoc.Document.Rebuild2
ThisDoc.Document.Update2
Manual work around is to change the formula, then the value is recalculated.
iLogic work around is to change a parameter-value - and run the rule TWICE.
Question: How do I force a real rebuild, that actually wil recalculate parameter-values the first time I run the iLogic rule?
Background: The attached file is a little subset of the skeleton in a large assembly that is controlled by iLogic. The rules are placed in the topassembly, and writes vaules to the skeleton-file.
After writing values to skeleton-parameters I try to force them through with this iLogic
RuleParametersOutput()
InventorVb.DocumentUpdate()
iLogicVb.RunRule("Skeleton", "Update")
Later in the process I use calculated values to decide which components should be active. But my logic fails because my decisions are made on faulty values.
I did manage to get the updating work in 2011. But after migrating to 2012, it seems impossible to have it update correct. The user has to run rules several times, and doing manually updates to get a correct model.
I want to export reference parameters to an excel table using i-Logic
I found the function GoExcel.CellValues("filename.xls", "Sheet1", "A2", "A10") = MultiValue.List("d0")
It looks like the syntax calls for the file location and name if the xls file is not open and if open is not supposed to be required.
I have entered it both ways and with and with out the target file open and with the function GoExcel.Open("pathFilename.xls","sheet1") and continue to get the error:
we couldn't find C:AbellAbell VaultWorkSpaceDEVELOPMENTAC100-0100MRLTEST Table.xls. Is it possible it was moved, renamed or deleted?
Also, I was expecting that to fill in the sheet cell's would be MultiValue.List("d0","d1","d2")
but the system give me an error that says
Error on Line 3 : Overload resolution failed because no accessible 'List' accepts this number of arguments.
See below
GoExcel.Open("C:AbellAbell VaultWorkSpaceDEVELOPMENTAC100-0100MRLTEST Table.xls", "AC-100-0101003-TEST")GoExcel.CellValues("C:AbellAbell VaultWorkSpaceDEVELOPMENTAC100-0100MRLTEST Table.xls", "AC-100-0101003-TEST", "A2", "A10") = MultiValue.List("d194_A")GoExcel.Save
iLogic code question concerning how Place iLogic Component and retain the ability to push parameters from the subassemblies to the parts after being renamed.
I have ASSEMBLY.iam containing:
SUBASSEMBLY-01:1.iam
SUBASSEMBLY-02:1.iam
and sometimes SUBASSEMBLY-02:2.iam
each SUBASSEMBLY.iam contains PART1.ipt and PART2.ipt which have variable LENGTH and WIDTH. LENGTH and WIDTH are entered manually at the SUBASSEMBLY.iam and are infinitely variable.
To transfer the parameters I'm using iLogic code in the SUBASSEMBLY:
Parameter("PART1.ipt", "LENGTH")=LENGTHParameter("PART1.ipt", "WIDTH")=WIDTHParameter("PART2.ipt", "LENGTH")=LENGTHParameter("PART2.ipt", "WIDTH")=WIDTH
Issue 1: When I place the SUBASSEMBLY as an iLogic Component, the parts are renamed to PART1-01.ipt which renders my Parameter transfer useless. What am I missing on writing this code so it can find the new part name?
Issue 2: I like the automatic renaming that happens with Place iLogic Component. Is there a better way to handle this automatically through Place Component -> Save & Replace?
Inventor 2013
I am looking for information on the option parameters, any documentation?
I found some code to query what parameters there are (Rule: GetTranslatorOptions), just not sure what the enumerations are for some.
Specifically: ExportUnits, Resolution
Using Rule:ExportSTL
I have changed the Export Units from 1 to 4 and do not see any change to the STL ASCII output.. not sure what this parameter does... Expected it to be an enumeration of the drop-down box that you see during "manual" exporting.
I have this little iLogic snippet that writes out the name and value of all parameters in active document.
doc = ThisDoc.Documentparams = doc.ComponentDefinition.Parametersnames = New List(Of String)values = New List(Of String)For Each param In paramsIf Len(param.Name)>4 Thennames.Add(param.Name)values.Add(param.Value.ToString)ElseEnd IfNextMultiValue.List("ParamsList") = namesMultiValue.List("ParamsValues") = valuesGoExcel.CellValues("COVER.DEFAULT.PARAMS.xlsx", "Sheet1", "A2", "A400") = MultiValue.List("ParamsList")GoExcel.CellValues("COVER.DEFAULT.PARAMS.xlsx", "Sheet1", "B2", "B400") = MultiValue.List("ParamsValues")GoExcel.SaveGoExcel.Close
The problem is it ignores the parameter's units and assumes cm for length and rad for angular. I need another nested IF - Then that says:
IF param.Values.'UnitType' is "in" THEN
param.Value = param.Value/2.54
Else If param.Values.'UnitType' is "deg" THEN
param.Value = param.Value*360/2/3.14159
End If
I just do not know the syntax or proper method.
Is there a way to work with parameters on a suppressed assembly using iLogic.Everything works fine, but when I suppressed a part ilogic rule give me an error: Parameter: The component named "xxxxx:1" was not found.
View 1 Replies View RelatedIs there a standard command or command sequence that allows for the changing of a parameter, say length, of a component from within an assembly. I'm looking to compile a code that allows for a template to be created, then that template will do changes based on text box input and then save out the modified parts with new part numbers.
View 2 Replies View RelatedI need import all new params, rules and forms from a new template to older parts. I'm trying to use an external rule to create a new iproperties and import params from xml file but I can't assign these parameters with these iproperties.
I attach the code.
I am trying to use an iLogic Excel link to define the hub and bushing dimensions for a wing pulley part file. I get an error: GoExcel: Could not match the column title: "Size". I've attached the part file and Excel file. The iLogic rule in the part file is called Hub_Bushing.
View 9 Replies View RelatedI would like to be able to use iLogic to get the value of the Comment field of a model's parameters. I have some text there that I would like to display in a sketched symbol. The attached image illustrates what I am seeking.
View 2 Replies View RelatedSo far I can discover parameters and ilogic aren't possible in the definition of a drawing border.
How can fold lines be created in a border that can be used for multiple scales?
I have a requirement to insert PDF files via an OLE object link into a large number of .iam and .ipt files. Is there iLogic code out there that will perform this feat? The plan would be to gather all file names and associated pdfs in an excel spreadsheet and run the iLogic against that.
i7-2720QM Dell Precision M6600, Win 7 Pro 64-bit, 8GB RAM
Autodesk Product Design Suite Ultimate 2013
Autodesk Vault Professional 2013
I have two user parameters saved in a part template that are tied to the part volume and an overall estimated part weight. The user parameter Pc_Volume is the volume in cubic feet and calculated by pulling the part mass (in cubic inches) and converting to cubic feet via ilogic rule. This is then automatically run via event triggers before a file is saved and if the part geometry has changed to keep the volume up to date. These are exported because they get pulled into iproperties of our drawing files as well as used to create a parts lists showing the volumes and weights.
I have the property formats of the user parameters set to Number and to unitless and the unit display turned off so it does not show on the parts list, with a precision of 0.000 for Pc_Volume. The Pc_Weight is set the same way however with a precision rounded to the nearest whole number.
These are created this way so when we use the part file as the template when we select "Make Components" to separate our parts and tie them to an assembly all the files are then updated and the information saved for exporting.
The problem is, the Pc_Volume always comes in rounded to a whole number. The Pc_Weight Does as well, but that doesn't bother me since we want it to do that anyway. If I would go into the part file after it's created, double check the precision and then re-run the rule the volume will show up with the correct precision in the exported parameters. I don't want to have to open each partfile however to get this to update.
Attached are images of the parameters, ilogic rule, and exported results.
I want to change 'mutil value select" to "custom value input" in ilogic user parameters. something like this:
if condition A then
multivalue.setlist("length", 1,2,3,4,5)
else
(users can enter any value they want, how can i remove the list first and set it to custom value input?)
When I link in an excel document to my model all parameters in that excel gets the unit (mm).
How can I change this? For instance I want some of the parameters to be an angle.
Possible to run the 'import .xml structure' routine for an assembly BOM using either iLogic or VB?? I'm trying to replicate the Import button at the bottom of the BOM screen....
View 5 Replies View RelatedI have two stretch parameters on a dynamic block. How can I link them together? For example if the user stretch one them the other automatically stretches accordingly. I assume 'Parameter Manager' is the key.
View 7 Replies View RelatedWe have a couple parts that are linked to a jpg file, through Inventor studio. They were set as a reflection image, from what I can tell. However they are now perminantly linked to the part and anything we copy from it. I eliminated the reflection from Inventor studio, but Vault still thinks the link is there. If we delete the jpg files it causes unresolved references and as we all know Inventor will then refuse to work until they are resolved.
Any way to get rid of this link? We can make a new jpg, and resolve it, but not delete it.
importing a sheet metal style (STYLENAME.styxml) into a sheet metal part.
I would like to automatically import the style using an iLogic script.
My goal is to open have people go into a central assembly file, type in their specific parameters and the various part files update within the assembly. I wish to do this without the need for an excel sheet, but when I try to link the parameters from the assembly file to the part files, it will not allow me to insert these parts. I get an error about an "assembly can not be placed into itself."
Iparts will not work as this has an infinite amount of sizes.
I linked an excel (2010) file with an inventor (2011) .ipt and none of the parameters are showing inside inventor. I was leaving the file external but I embed it also as a trouble shooting step and nothing still. I have no spaces in excel sheet. Is there something special i need to be doing inside excel or inventor?
View 5 Replies View RelatedI would like to have a rule that will add specific user parameters to a part file. These parameters need to be formatted so the width, depth and thickness will control the description of the part.
IE:
Width=4
Depth=2
Thickness=3/16
DESCRIPTION = TS <Width>X<Depth>X<Thickness>
I would like to format each parameter so that the:
Format=Fractional
Precision=1/16
Unit string=False
This is what I have so far:
oMyParameter=ThisApplication.ActiveDocument.ComponentDefinition.Parameters.UserParameters
oParameter=oMyParameter.AddByExpression("Width", "TOP_RAIL_WIDTH", UnitsTypeEnum.kInchLengthUnits)
oParameter.ExposedAsProperty=True
oParameter.Units="in"
[Code]...
The TOP_RAIL parameters are from a linked file.
I'm linking an excel file to an .ipt file with iLogic code determining if the Material type is a certian value it will find the correct material thickness. These file work great when working on them thru Vault but when I "Save As Template" and create this file where our other template files are located (not Vault) this fuction does not work. I have realized that I had to place the a copy of the excel file in the same file folder as the template ipt, but even this does not fix the issue.
I recieve this error:
Error in rule: Material, in document: Part6
'MWW Materials (Inventor).xlsx' could not be found. Check the spelling of the file name, and verify that the file location is correct.
If you are trying to open the file from your list of most recently used files, make sure that the file has not been renamed, moved, or deleted.
It seems completly countintutive that just saving the file as a template file would cause this not to work when all files that are required are located in the same file folder. Maybe I need a reference to the excel document within the iLogic code.
