When I link in an excel document to my model all parameters in that excel gets the unit (mm).
How can I change this? For instance I want some of the parameters to be an angle.
I am making an assembly where I wanted to use an excel sheet to link common paramters between the parts. I know how to do it for just my single system, but I am wanting to have all the parts and the excel sheet stored in my vault server. Is there anyway to link the parameter list to the excel file stored in the vault or how can I go about having a common file that everybody can access.
What I am worried about is if the excel file is located on my computer and someone tries to open a part on another machine, it will not find the excel parameters and everything crash.
I tried to match the dimensions of the already existing product with new dimension through fx parameters(using link excel sheet), while conversion all the dimensions are changed except taper value (By default it comes with inch instead of degrees) It can be changed by adding user parameter but i want it to consider from excel sheet data itself. Is it possible? For reference i have attached the snap shots
View 1 Replies View Relatedlinked Excel file to Inventor 12 file parameters. Windows 7, Excel MS office professional '10. Linked excel file, here dimensions are driven by parameters which are driven by excel. toggled 'immediate update' Still - i have to open the sketch - it shows the updated number from Excel, but only on opening the sketch will it change the model to use the new dimension value.
View 3 Replies View RelatedI have a problem with using the excel spreadsheet to hold my parameters and then making them auto update in the model.
I have the excel 2003 spreadsheet saved in the same folder in the projects directory as the model. When I create the spreadsheet and enter the parameters and values etc I save and close the file.
When I am in inventor 2013 64 bit with SP1 installed, I open the model and can link the spreadsheet to the model and the model reflects the values in the spreadsheet. I also click update on the parameters dialog box.
I then open the spreadsheet and make some changes to the values, save the file and even go to the extreme of closing the file. When I go back into Inventor it recognises there has been some changes in the underlying spreadsheet. The update button is active in the tool bar. However trying to update the models by what ever means does not update the model parameters to those in the spreadsheet. Even closing the model and reopening it does not make a difference.
The only way I can get this to work is disconnecting the file and then reconnecting the file through the links option in the parameters dialog box. Then the model reflects the correct values and updates the model accordingly.
My concern is there is quite a bit of stuff on the net about 2013 not working with 2014 inventor anyway.
I created an assembly, so far with one part in it. I created an Excel spreadsheet with several dimensions in it that would be used in the assembly parts. I went to Manage>Parameters and linked the spreadsheet. The Excel file appeared in the Parameter Dialog Box with the parameters included in it. However, when I create a part in the assembly and attempt to dimension a sketch in it, the parameters option in the dimension box is not present.
I have done this in the past in IV2009, has anything changed that I cannot do so in 2010?
As my Inventor endeavors continue, I would like to take a template of a part I made and use Excel to change the parts dimensions. Essentially make it so if we need a 20 Tonne Lift Lug, I just punch in the necessary values in Excel and have the part update.
View 1 Replies View RelatedI'm trying to export parameters for my parts to an excel sheet, this way to be able easily to edit any of these. So far :
1. exported parameters as xml.file and opened it in my excel sheet.
2. saved this sheet as xls.file on my desktop and linked (embed) parameters to this file.
- value column is formatted as text.
- any update to value column should immediatly change (after save and close worksheet?) parameters in inventor ?
Inventor 2012 Professional
Excel 2010 [URL]....
We have a whole bunch of spreadsheets that we use for calculations and parts of those spreadsheets are linked to a ton of CAD Drawings via data links.
We would like to be able to deliver the CAD drawings to the client without having to send our calculation books (just the output tables). In other words, is it possible to embed the table data and remove the excel link for the final delivery?
I have linked my inventor drawing to excel to adjust some parameters. Is it also possible to have a enable/disable function in excel so a part in an assembly can be disabled at will?
View 3 Replies View RelatedI want to export reference parameters to an excel table using i-Logic
I found the function GoExcel.CellValues("filename.xls", "Sheet1", "A2", "A10") = MultiValue.List("d0")
It looks like the syntax calls for the file location and name if the xls file is not open and if open is not supposed to be required.
I have entered it both ways and with and with out the target file open and with the function GoExcel.Open("pathFilename.xls","sheet1") and continue to get the error:
we couldn't find C:AbellAbell VaultWorkSpaceDEVELOPMENTAC100-0100MRLTEST Table.xls. Is it possible it was moved, renamed or deleted?
Also, I was expecting that to fill in the sheet cell's would be MultiValue.List("d0","d1","d2")
but the system give me an error that says
Error on Line 3 : Overload resolution failed because no accessible 'List' accepts this number of arguments.
See below
GoExcel.Open("C:AbellAbell VaultWorkSpaceDEVELOPMENTAC100-0100MRLTEST Table.xls", "AC-100-0101003-TEST")GoExcel.CellValues("C:AbellAbell VaultWorkSpaceDEVELOPMENTAC100-0100MRLTEST Table.xls", "AC-100-0101003-TEST", "A2", "A10") = MultiValue.List("d194_A")GoExcel.Save
I know that to design for example a 3d curve i have to import a XYZ data points from excel. What if i wanna link these points from excel to Inventors curve? Everytime i change the excel file i want my curve to be updated.
View 9 Replies View RelatedI am trying to use an iLogic Excel link to define the hub and bushing dimensions for a wing pulley part file. I get an error: GoExcel: Could not match the column title: "Size". I've attached the part file and Excel file. The iLogic rule in the part file is called Hub_Bushing.
View 9 Replies View RelatedIs there a way to link any inventor file iproperties to a excel spreadsheet - so that the excel spreadsheet updates parametrically with any inventor iproperty changes.
I know that inventor parameters can be linked to excel, but what about i properties?
I linked an excel (2010) file with an inventor (2011) .ipt and none of the parameters are showing inside inventor. I was leaving the file external but I embed it also as a trouble shooting step and nothing still. I have no spaces in excel sheet. Is there something special i need to be doing inside excel or inventor?
View 5 Replies View RelatedI'm trying to link an Excel sheet to a new assembly but it is only listing half of the sheet parameters. I have done this before with no issues. I've also imported another sheet and it works fine. I copied and renamed a sheet I know that works deleting the data from it and coping the data I want and I get the same results. This lead me to believe there is something wrong with the sheet. See attached file.
Excel 2010
Windows 7
Inventor 2012 64 bit
When I add parameters to Excel, the new parameters do not show up in the linked parts. Even when starting
a new part and linking to the same excel file, the original parameters are all that are shown; not the new ones.
Recently I have been trying to build table driven products and ipart tables, but when I copy a member to create a new part number, upon exiting the iassembly author I get the following message "excel installation is required for this operation. failed to launch excel". I have a fully functional version of 2010 Excel installed which has been used so it should be recognized in the windows registry. I am running Windows 8 and Autodesk Inventor 2014.
View 6 Replies View RelatedHow to fix a broken link to an excel table in an idw file general table?I changed the folder name and heirarchy of the project.i expected the idw tables to find their parent excel files in the same folder with a new name, but they didn't.
I could find nothing for fixing broken excel links.
I'm messing around with tables and data links, practicing. I copied a range of cells in Excel, and did paste special to create a linked table.
Now I can delete the table object, but I cannot delete the link, cannot detach it.
When in Data Manager if I right click on the data link and click delete I get the error message "The data link is being used and cannot be deleted".
I have tried detaching, and the detach does not seem to take.
Now also, the table will not update from the source xls.
Win XP, AcadLT 2011, Office 2010. Using compatible setting for saving spreadsheet, for Office 2007 (not xlsx).
If I create a linked table by starting with the Table icon, choose "from a data link", choose the excel spreadsheet, etc., then I am able to later update the table from the spreadsheet, detach, delete the link, etc. But I can only delete the link if the table is not selected when I open the Data Link Manager.
But the one that was created following the directions from the Autocad video, with the copy, paste special, that link will not detach nor delete.
i'm trying to link excel to autocad for a time now. and until now it didn't work for me.
Everytime it says "1 data link(s) do not allow their data to be written out." thats when i try to write it to the excel file.
We have tremendous problem in our office while we open the CAD files which have linked to excel tables. It takes endless loading time if any computer has excell sheets opened. We use copy / paste special ( linked ) command to brought excel tables to the DWG files. OLE OBJECT command has worst result about linking excel sheets. How do we control ( link option) in this stution as linked versus unlinked?
View 1 Replies View RelatedI am trying to link an excel spreadsheet to my acad but I can't see it once i've linked to it?
View 2 Replies View RelatedWhen trying to insert a table linked to an Excel 2010 file, it works up until row 28, however, as soon as I add a 29th row to the table it no longer inserts the table. When I try and insert it, I press ok and nothing happens. I tried inserting it as a smaller table and changing the data link to a bigger range after it was inserted, it just didn't update to a larger range.
Is there a way of getting this to work without having to insert it as two different tables?
I had a bit of a search around the net and what I found mostly said it can't be done natively in AutoCad although I thought I might as well ask anyway.
I want to link individual mtext objects in AutoCad to cell contents in an Excel file (like a datalink for a table, but I can't use a table in this instance). Any thoughts?
If it is not possible it is not a huge deal although hopefully the design doesn't change in the future as it will be a pain to update all these manually
I'm trying to link a text from Autocad to an excel spreadsheet so that when changed in Excel, be changed in autocad.
After searching on some forums, I started doing database through ODBC.
I made a table in excel selecting and naming fields, added the file in windows OBDC manager, able to make the connection through dbConnect autocad, created label ...
Now I need to put the information in the database autocad text entity and already there I'm not getting more done
I want to link an excel sheet with a drawing, so changing the excel changes the drawing.
I used this awesome site to learn about going to Edit->Paste Special->Paste Link->AutoCAD Entities...but I don't have that choice. Just the one that makes the OLE image. While that will work, that is less than ideal. It appears in just normal paste, but not under paste link.
AutoCAD 2007, A.54; Excel 2003 SP3; Windows XP SP3.
designer has Excel 2007 and cad 2012 LT. He linked a table into the plans.
I have Excel 2010 and cad 2012. I opened the plans, i double click on the table he just inserted with 'paste special link', and the excel table will not open for me to edit.
When I linked the same table into the plans, he was unable to double click the table in cad to open the table to edit it.
the cad error is 'FAILED TO LAUNCH SERVER APPLICATION'
I am not sure if it is because he has cad 2012 LT and I have the full version?
Is it cause the different version of Excel?
I have AutoCAD 2013 and often "paste special" excel files that automatically update when the excel file changes.The problem I'm running into is I work with a person who has uses an older version of CAD 2004, so I always save to the older format for him.
When I etransmit, I be sure to add the excel file, but when he opens the dwg, only the outline of the excel appears in his dwg, no content.
I'm trying to link excel to autocad for a time now.
and until now it didn't work for me.
Everytime it says "1 data link(s) do not allow their data to be written out."
thats when i try to write it to the excel file.
We are a MEP firm, using AutoCAD 2011 and Excel 2007, and our project is a building with 1000+ rooms. Each room has specified supply and return airflows that need to show up in text in each of the rooms. All the airflow values are calculated in a spreadsheet.
My thought is to use fields in the text that shows up in each room, then link each field to a specific cell in Excel, because these values will be evolving over the next year.
