AutoCAD Inventor :: Exporting Parameters To Excel
Mar 9, 2012
I'm trying to export parameters for my parts to an excel sheet, this way to be able easily to edit any of these. So far :
1. exported parameters as xml.file and opened it in my excel sheet.
2. saved this sheet as xls.file on my desktop and linked (embed) parameters to this file.
- value column is formatted as text.
- any update to value column should immediatly change (after save and close worksheet?) parameters in inventor ?
Inventor 2012 Professional
Excel 2010 [URL]....
View 1 Replies
ADVERTISEMENT
Oct 30, 2008
When I link in an excel document to my model all parameters in that excel gets the unit (mm).
How can I change this? For instance I want some of the parameters to be an angle.
View 8 Replies
View Related
Sep 17, 2010
I created an assembly, so far with one part in it. I created an Excel spreadsheet with several dimensions in it that would be used in the assembly parts. I went to Manage>Parameters and linked the spreadsheet. The Excel file appeared in the Parameter Dialog Box with the parameters included in it. However, when I create a part in the assembly and attempt to dimension a sketch in it, the parameters option in the dimension box is not present.
I have done this in the past in IV2009, has anything changed that I cannot do so in 2010?
View 9 Replies
View Related
Jan 31, 2012
As my Inventor endeavors continue, I would like to take a template of a part I made and use Excel to change the parts dimensions. Essentially make it so if we need a 20 Tonne Lift Lug, I just punch in the necessary values in Excel and have the part update.
View 1 Replies
View Related
Dec 13, 2011
I have linked my inventor drawing to excel to adjust some parameters. Is it also possible to have a enable/disable function in excel so a part in an assembly can be disabled at will?
View 3 Replies
View Related
May 21, 2013
I want to export reference parameters to an excel table using i-Logic
I found the function GoExcel.CellValues("filename.xls", "Sheet1", "A2", "A10") = MultiValue.List("d0")
It looks like the syntax calls for the file location and name if the xls file is not open and if open is not supposed to be required.
I have entered it both ways and with and with out the target file open and with the function GoExcel.Open("pathFilename.xls","sheet1") and continue to get the error:
we couldn't find C:AbellAbell VaultWorkSpaceDEVELOPMENTAC100-0100MRLTEST Table.xls. Is it possible it was moved, renamed or deleted?
Also, I was expecting that to fill in the sheet cell's would be MultiValue.List("d0","d1","d2")
but the system give me an error that says
Error on Line 3 : Overload resolution failed because no accessible 'List' accepts this number of arguments.
See below
GoExcel.Open("C:AbellAbell VaultWorkSpaceDEVELOPMENTAC100-0100MRLTEST Table.xls", "AC-100-0101003-TEST")GoExcel.CellValues("C:AbellAbell VaultWorkSpaceDEVELOPMENTAC100-0100MRLTEST Table.xls", "AC-100-0101003-TEST", "A2", "A10") = MultiValue.List("d194_A")GoExcel.Save
View 8 Replies
View Related
Oct 7, 2013
I am making an assembly where I wanted to use an excel sheet to link common paramters between the parts. I know how to do it for just my single system, but I am wanting to have all the parts and the excel sheet stored in my vault server. Is there anyway to link the parameter list to the excel file stored in the vault or how can I go about having a common file that everybody can access.
What I am worried about is if the excel file is located on my computer and someone tries to open a part on another machine, it will not find the excel parameters and everything crash.
View 4 Replies
View Related
Jul 20, 2012
I linked an excel (2010) file with an inventor (2011) .ipt and none of the parameters are showing inside inventor. I was leaving the file external but I embed it also as a trouble shooting step and nothing still. I have no spaces in excel sheet. Is there something special i need to be doing inside excel or inventor?
View 5 Replies
View Related
Apr 3, 2013
I tried to match the dimensions of the already existing product with new dimension through fx parameters(using link excel sheet), while conversion all the dimensions are changed except taper value (By default it comes with inch instead of degrees) It can be changed by adding user parameter but i want it to consider from excel sheet data itself. Is it possible? For reference i have attached the snap shots
View 1 Replies
View Related
Jul 18, 2012
I'm trying to link an Excel sheet to a new assembly but it is only listing half of the sheet parameters. I have done this before with no issues. I've also imported another sheet and it works fine. I copied and renamed a sheet I know that works deleting the data from it and coping the data I want and I get the same results. This lead me to believe there is something wrong with the sheet. See attached file.
Excel 2010
Windows 7
Inventor 2012 64 bit
View 3 Replies
View Related
Oct 12, 2011
When I add parameters to Excel, the new parameters do not show up in the linked parts. Even when starting
a new part and linking to the same excel file, the original parameters are all that are shown; not the new ones.
View 3 Replies
View Related
Jan 9, 2013
Is there any way of exporting text parameters from an assembly to individual parts without using i Logic? I am also unable to import text parameters to a . I am from an excel file.
We are currently using ilogic to change part text parameters from the assembly but it is a sticking plaster at best, as the rules need to be rewritten when parts are added and deleted from the assembly. We are trying to update our etched job number (which in many cases contains letters) from a single point on the assembly model which should populate all part files, and make it robust for all our CAD users, who do not use iLogic in their day to day duties.
If this is not possible (exporting text parameters the same way numerical parameters are handled) is there any plans of getting this included in upcoming versions?
View 1 Replies
View Related
Jan 27, 2012
linked Excel file to Inventor 12 file parameters. Windows 7, Excel MS office professional '10. Linked excel file, here dimensions are driven by parameters which are driven by excel. toggled 'immediate update' Still - i have to open the sketch - it shows the updated number from Excel, but only on opening the sketch will it change the model to use the new dimension value.
View 3 Replies
View Related
Aug 7, 2013
I have a problem with using the excel spreadsheet to hold my parameters and then making them auto update in the model.
I have the excel 2003 spreadsheet saved in the same folder in the projects directory as the model. When I create the spreadsheet and enter the parameters and values etc I save and close the file.
When I am in inventor 2013 64 bit with SP1 installed, I open the model and can link the spreadsheet to the model and the model reflects the values in the spreadsheet. I also click update on the parameters dialog box.
I then open the spreadsheet and make some changes to the values, save the file and even go to the extreme of closing the file. When I go back into Inventor it recognises there has been some changes in the underlying spreadsheet. The update button is active in the tool bar. However trying to update the models by what ever means does not update the model parameters to those in the spreadsheet. Even closing the model and reopening it does not make a difference.
The only way I can get this to work is disconnecting the file and then reconnecting the file through the links option in the parameters dialog box. Then the model reflects the correct values and updates the model accordingly.
My concern is there is quite a bit of stuff on the net about 2013 not working with 2014 inventor anyway.
View 3 Replies
View Related
Nov 21, 2012
I am trying to export a user parameter that is a text string to a custom I property. I am able to export other parameters to custom properties that are numarical values. I export check box is missing on the text user parameter.
Is there a way to acomplish this with I-logic?
View 5 Replies
View Related
Mar 27, 2013
I have an ipart which is being controlled by an external spreadsheet. Each cell references a cell within a spreadsheet on my local drive. I have a set a parameters that are used to completely define each part but I am also interested in some of the reference parameters (from driven dimensions) so that I can analyze relationships between reference and input parameters. Is it possible (without extensive programming in windows VB or other) to export data from this iPart into, prefereably, the driving spreadsheet or another spreadsheet?
View 3 Replies
View Related
Jun 24, 2013
I have some manufacturing dimensions that are an end result of my design so they are driven dimensions at the end of my modeling history and pulled into the ipart table. If I make some design changes I need these dimensions to update too. The problem is they do not automatically update and require a manual activation of each child memeber for the dimension to update.
The dreaded "The Values in the active row don't match the document's current values. do you wish to update the table before continuing" Click, enter, Click, enter, Click, enter.
Autodesk Inventor 2012 Certified Assosicate
Autodesk Inventor 2012 Certified Professional
View 1 Replies
View Related
Oct 8, 2013
How do I export my IDW drawing dimensions to an Excel file for use on a First Article Inspection.
Is it even possible?
View 3 Replies
View Related
Oct 6, 2012
But I was wondering if it is possible to contol the insertion of dynamic blocks and it user definerable parameters from a excel-text file.
I am surveying a section of pipework and I need to display the brackets that are supporting the pipes. As there are numerous pipes on top of each other I have decided to show the brackets in plan and isometric view.
I think I have made the dynamic block ok and have numerous stretch/move and scale parameters working correctly.
But the only way that I can see of chaging these parameters at the momment is by manually typing them in the properties tool pallete for each individual block.
So I was thinking that if I can store the correct values that I need for each parameter in the dynamic block on our data logger along with the correct E,N,Z insertion point is it possible for this file to change the parameters in the dynamic block for example, If I have the correct insertion point stored and then have 10 parameters stored with that point for simplicity I store as A=5.00,B=8.00,C=0.100 etc and these correspond with the parameters in the dynamic block will this file be able to alter the dynamic block as the values in the excel/Text file are displayed.
View 2 Replies
View Related
Mar 14, 2013
In a machine shop environment, the current practice is for an admin person to review the drawing, then take down all dimensions and enter them manually into Excel. Is there an easier way to export data to Excel so that I can have the dimension reports rather than doing them manually. The second question is on the ability to save the document as a .pdf, although I think this is possible.
View 4 Replies
View Related
Jan 26, 2012
I wanted to know if it's possible to export a drawing from Autocad to Excel. The drawing is in both model space and layout and contains polygons and blocks.
View 5 Replies
View Related
Aug 17, 2012
I am trying to export a manually generated material list (not an AutoCAD "table") to an Excel spreadsheet or a .csv file. I've tried selecting the text and right clicking, but there is no export option. I've also tried selecting the text and going directly to Export, but I see no option to save it as a .csv.
View 3 Replies
View Related
Jul 24, 2012
Can you take text from a drawing and export it out to excel? My thoughts are room numbers, employee names, department names, etc.
I need an excel spreadsheet showing this information to then upload to my CAFM Application? Is there an alternative to obtaining a report from a drawing?
View 4 Replies
View Related
Dec 29, 2011
I'm having an issue plotting or exporting a dwg to pdf. When I have a dwg with a linked excel table and want to plot a layout, everything plots except the excel table. I'm running LT 2012, windows 7 pro (64-bit). I send the same file over to a friend running LT 2011 an he adjust the viewport boundaries slightly and he encounters no problem either plotting or exporting to pdf. I've tried the same with no success. My Adobe Reader is up to date as well.
View 7 Replies
View Related
Mar 26, 2013
I may be missing something obvious in Revit. I'm wanting to Export my model to use in Navis and QTO, when I send it out I can see the out of the box Revit parameters, but none of my customised ones. Is there a way to make the dwf/dwfx take all object properties out?
View 3 Replies
View Related
Sep 4, 2013
Recently I have been trying to build table driven products and ipart tables, but when I copy a member to create a new part number, upon exiting the iassembly author I get the following message "excel installation is required for this operation. failed to launch excel". I have a fully functional version of 2010 Excel installed which has been used so it should be recognized in the windows registry. I am running Windows 8 and Autodesk Inventor 2014.
View 6 Replies
View Related
Apr 9, 2013
Just trying to bring in a Volumes Dashboard report from IE10 to Excel 2010 (it all worked fine until I my PC was upgraded from IE9/Excel 2007)
When the report is in IE10, I Select All and paste to Excel (as I always have done) and the numbers are not recognised as numbers (there is no convert text to numbers prompt) and seem to have a leading space which Find/Replace can't find and replace.
If I right click in IE10 and Export to Excel, most of the exported data has a weird character preceding it (but which can be found and replaced). What this character is and how to stop it appearing?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 3 Replies
View Related
Jan 24, 2012
I am trying to export what looks like a table of text to Excel. The problem I have is the table is not an actual TABLE within AutoCAD but rather just columns of text with lines drawn around it. How I can grab this text and then put it into an Excel Spreadsheet.
View 5 Replies
View Related
Jun 1, 2011
We are using Coral Draw 11 and have to get a lot of our data from Excel. Currently we are copying and pasting the information in, but this is very time consuming. Is there a faster and simplier method?
View 4 Replies
View Related
Aug 3, 2011
How can you access user-defined parameters/function defined in the Parameters Manager dialog?
View 1 Replies
View Related
Sep 21, 2011
Im wondering if its possible to link either a constraint dimension to an action parameter or vice versa. Or using a linear parameter's value in an user parameter formula.
Its a 2D cylinder, for winding purposes we just have a rectangle, with a distance from the Y axis for radial.
Parametric dimensions: B=thickness, C=Lenght, R=radius
User parameter: A=Diameter (R*2), Mass in kg ((((pi*(c*b))*(A+B))*1.25)/1000)/1000
For the BOM, i need A, B, C & mass
For drawing references for peoples on the floor, to distinquish a cylinder from a stick, we put lines at the top and bottom of the cylinder, 1mm distance inbetween them.
I figured that making a linear parameter + stretch on the thickness to replace the B parametric dimension, allowed me to make an array of that line, with increments of 1mm as i stretch the cylinder. The thing is that the mass formula cant take the value of action parameters....
Other alternative is to keep the B parametric dimension, and add a linear parameter as above for the array. But then i have 2 places to adjust, and from a test i made, if i change the R dimension, the linear one does not follow. Its very frustrating.
What i was hoping autocad would be able to do is distance1 for array to be same as B dimension, but it does not allow me to do that, unless im missing something.
View 0 Replies
View Related
