AutoCAD Inventor :: New Dimension Through Fx Parameters (using Link Excel Sheet)
Apr 3, 2013
I tried to match the dimensions of the already existing product with new dimension through fx parameters(using link excel sheet), while conversion all the dimensions are changed except taper value (By default it comes with inch instead of degrees) It can be changed by adding user parameter but i want it to consider from excel sheet data itself. Is it possible? For reference i have attached the snap shots
I am making an assembly where I wanted to use an excel sheet to link common paramters between the parts. I know how to do it for just my single system, but I am wanting to have all the parts and the excel sheet stored in my vault server. Is there anyway to link the parameter list to the excel file stored in the vault or how can I go about having a common file that everybody can access.
What I am worried about is if the excel file is located on my computer and someone tries to open a part on another machine, it will not find the excel parameters and everything crash.
I'm trying to link an Excel sheet to a new assembly but it is only listing half of the sheet parameters. I have done this before with no issues. I've also imported another sheet and it works fine. I copied and renamed a sheet I know that works deleting the data from it and coping the data I want and I get the same results. This lead me to believe there is something wrong with the sheet. See attached file.
I want to link an excel sheet with a drawing, so changing the excel changes the drawing.
I used this awesome site to learn about going to Edit->Paste Special->Paste Link->AutoCAD Entities...but I don't have that choice. Just the one that makes the OLE image. While that will work, that is less than ideal. It appears in just normal paste, but not under paste link.
AutoCAD 2007, A.54; Excel 2003 SP3; Windows XP SP3.
I have made a data link to an excel file. Then I bring it in as a table. I then adjust the text height and remove all formatting from the table. Unfortunately, after closing and re-opening the file, the table changes. I lose formating/cell alignment/text height. It isn't even consistent across the table. The lost formatting is only on the 2nd split of the table, the first side retains the corrected formatting. I have selected the option to not update excel formatting. I don't even get a notification the table is updating. There haven't been any changes to the excel sheet either....
I would like to link a series of text lines in an autocad drawing to there corresponding fields in an excel sheet, I can not use tables in autocad because of the way other software uses the text in autocad. I have attached files of the text layout in acad and of the sheet in excel. One thing that keeps me from using tables in acad is that every line of text is on a different layer, with tables you can't control the layer of table its always on the current layer.
I am using AutoCAD Mechanical 2013. (Full version).If there is SLD with different HP rating, tag names and different cable ferrule numbers, and if there is any small change in HP rating of motor or small change in tag name, then it is time consuming work for me to go to AutoCAD and change the text by referring Excel sheet.
Is there any way to link excel sheet to AutoCAD drawings? So i can take updated excel sheet and link it with AutoCAD and if there is any change in excel sheet then it will be updated in CAD file as well.If there is any setting or grid referencing to be made. I am ready to do the required changes to meet my requirement.
I am using Inventor 2010 (I know this is my first problem, but you have to use what you're given!) and I need to use the sheet number in a calculation that will display the result in a text box. =((<SHEET NUMBER>-1)8)=1 displays a result of ((11-1)8)+1. I suspect that the sheet number is being brought in as text instead of a number. I tried adding atoi to the equation to convert the sheet number to an integer, but it did not work.Is there an alternate source for the sheet number that will return a number? Is my syntax wrong?
I created an assembly, so far with one part in it. I created an Excel spreadsheet with several dimensions in it that would be used in the assembly parts. I went to Manage>Parameters and linked the spreadsheet. The Excel file appeared in the Parameter Dialog Box with the parameters included in it. However, when I create a part in the assembly and attempt to dimension a sketch in it, the parameters option in the dimension box is not present.
I have done this in the past in IV2009, has anything changed that I cannot do so in 2010?
As my Inventor endeavors continue, I would like to take a template of a part I made and use Excel to change the parts dimensions. Essentially make it so if we need a 20 Tonne Lift Lug, I just punch in the necessary values in Excel and have the part update.
I made 2 parts, c cylinder and a plate with a hole, and tried linked the Diameter parameter in the Cylinder file.
First, i chose the Diameter, in the link dialog box, but the new user parameter that was inserted was the file name only.
Secondly, when i activate the Hole parameter in the plate file and select List Parameters in the Equation column, i see only the Hole parameter, not the new one, the Diameter, which i tried to link. So, the link doesn't work.
But, i have, also, a general question: why do i see, in both files, in the List Parameters dialog, only the parameters which i changed their names? i expected to see all the parameters of the part, no?
I have linked my inventor drawing to excel to adjust some parameters. Is it also possible to have a enable/disable function in excel so a part in an assembly can be disabled at will?
I want to export reference parameters to an excel table using i-Logic
I found the function GoExcel.CellValues("filename.xls", "Sheet1", "A2", "A10") = MultiValue.List("d0")
It looks like the syntax calls for the file location and name if the xls file is not open and if open is not supposed to be required.
I have entered it both ways and with and with out the target file open and with the function GoExcel.Open("pathFilename.xls","sheet1") and continue to get the error:
we couldn't find C:AbellAbell VaultWorkSpaceDEVELOPMENTAC100-0100MRLTEST Table.xls. Is it possible it was moved, renamed or deleted?
Also, I was expecting that to fill in the sheet cell's would be MultiValue.List("d0","d1","d2")
but the system give me an error that says
Error on Line 3 : Overload resolution failed because no accessible 'List' accepts this number of arguments.
I want to import the parameters from the .ipt file into the .iam file using a rule from iLogic (unless there is another way to do it?)
I pinched the code from the example hand rail iLogic part that comes with inventor and tweaked it to suit. After inputting the code shown in the image, when I click OK I get a 'fatal error' of some sort.
I linked an excel (2010) file with an inventor (2011) .ipt and none of the parameters are showing inside inventor. I was leaving the file external but I embed it also as a trouble shooting step and nothing still. I have no spaces in excel sheet. Is there something special i need to be doing inside excel or inventor?
I know that to design for example a 3d curve i have to import a XYZ data points from excel. What if i wanna link these points from excel to Inventors curve? Everytime i change the excel file i want my curve to be updated.
I am trying to use an iLogic Excel link to define the hub and bushing dimensions for a wing pulley part file. I get an error: GoExcel: Could not match the column title: "Size". I've attached the part file and Excel file. The iLogic rule in the part file is called Hub_Bushing.
Is there a way to link any inventor file iproperties to a excel spreadsheet - so that the excel spreadsheet updates parametrically with any inventor iproperty changes.
I know that inventor parameters can be linked to excel, but what about i properties?
linked Excel file to Inventor 12 file parameters. Windows 7, Excel MS office professional '10. Linked excel file, here dimensions are driven by parameters which are driven by excel. toggled 'immediate update' Still - i have to open the sketch - it shows the updated number from Excel, but only on opening the sketch will it change the model to use the new dimension value.
I have a problem with using the excel spreadsheet to hold my parameters and then making them auto update in the model.
I have the excel 2003 spreadsheet saved in the same folder in the projects directory as the model. When I create the spreadsheet and enter the parameters and values etc I save and close the file.
When I am in inventor 2013 64 bit with SP1 installed, I open the model and can link the spreadsheet to the model and the model reflects the values in the spreadsheet. I also click update on the parameters dialog box.
I then open the spreadsheet and make some changes to the values, save the file and even go to the extreme of closing the file. When I go back into Inventor it recognises there has been some changes in the underlying spreadsheet. The update button is active in the tool bar. However trying to update the models by what ever means does not update the model parameters to those in the spreadsheet. Even closing the model and reopening it does not make a difference.
The only way I can get this to work is disconnecting the file and then reconnecting the file through the links option in the parameters dialog box. Then the model reflects the correct values and updates the model accordingly.
My concern is there is quite a bit of stuff on the net about 2013 not working with 2014 inventor anyway.
I'm messing around with tables and data links, practicing. I copied a range of cells in Excel, and did paste special to create a linked table.
Now I can delete the table object, but I cannot delete the link, cannot detach it.
When in Data Manager if I right click on the data link and click delete I get the error message "The data link is being used and cannot be deleted".
I have tried detaching, and the detach does not seem to take.
Now also, the table will not update from the source xls.
Win XP, AcadLT 2011, Office 2010. Using compatible setting for saving spreadsheet, for Office 2007 (not xlsx).
If I create a linked table by starting with the Table icon, choose "from a data link", choose the excel spreadsheet, etc., then I am able to later update the table from the spreadsheet, detach, delete the link, etc. But I can only delete the link if the table is not selected when I open the Data Link Manager.
But the one that was created following the directions from the Autocad video, with the copy, paste special, that link will not detach nor delete.
How to fix a broken link to an excel table in an idw file general table?I changed the folder name and heirarchy of the project.i expected the idw tables to find their parent excel files in the same folder with a new name, but they didn't.
I could find nothing for fixing broken excel links.
I would like to write a VBA macro which is able to find all of my inspection dimensions (rounded box in Inventor 11) and write some values into an excel sheet. Now, my problem is to identify the inspection dimension. I already looked into the API Object Model from Autodesk and into "all" properties of a drawing I created but I couldn't find them. I found the dimensions in the properties but no hint of an inspection flag.
if it is possible to increase the number of recently used values/parameters in the dimension dialog, during part sketching. For one part, I use approximately ten parameters that will be used repeatedly. When I'm done with one sketch and start with the next, only the last five parameters are in the recently used parameter list. (Create dimension --> select arrow on right side of dialog, see attachment Dimension_Dialog.jpg, excuse me for the poor quality ). It would be much more comfort to have more parameters in this 'recently used'-list.
Furthermore I'd like to know if it's possible to widen the parameter-list. In my case I've several parameters that start with the same prefix, followed by a differentiating suffix. When I create a new dimension, select the arrow on the right and select 'List Parameters', I have to adjust the width of this dialog every time to see the entire parameter. (see picture Dimension_parameters.jpg)
I am trying to create a new sheet in an existing excel file and can not figure out how to do it.
I am trying to export parts lists from multiple drawings to an exisitng excel spreadsheet and I'd like have each on their own sheet. I can do everything but create a sheet. How to do this in iLogic?
Inventor Pro 2013 (PDS Ultimate) Vault Pro 2013 Windows 7 64 Xeon 2.4 Ghz 12GB
