AutoCAD LT :: Excel Link Will Not Open In Cad 2012?
Mar 1, 2012
designer has Excel 2007 and cad 2012 LT. He linked a table into the plans.
I have Excel 2010 and cad 2012. I opened the plans, i double click on the table he just inserted with 'paste special link', and the excel table will not open for me to edit.
When I linked the same table into the plans, he was unable to double click the table in cad to open the table to edit it.
the cad error is 'FAILED TO LAUNCH SERVER APPLICATION'
I am not sure if it is because he has cad 2012 LT and I have the full version?
Is it cause the different version of Excel?
View 4 Replies
ADVERTISEMENT
Dec 26, 2011
I'm messing around with tables and data links, practicing. I copied a range of cells in Excel, and did paste special to create a linked table.
Now I can delete the table object, but I cannot delete the link, cannot detach it.
When in Data Manager if I right click on the data link and click delete I get the error message "The data link is being used and cannot be deleted".
I have tried detaching, and the detach does not seem to take.
Now also, the table will not update from the source xls.
Win XP, AcadLT 2011, Office 2010. Using compatible setting for saving spreadsheet, for Office 2007 (not xlsx).
If I create a linked table by starting with the Table icon, choose "from a data link", choose the excel spreadsheet, etc., then I am able to later update the table from the spreadsheet, detach, delete the link, etc. But I can only delete the link if the table is not selected when I open the Data Link Manager.
But the one that was created following the directions from the Autocad video, with the copy, paste special, that link will not detach nor delete.
View 5 Replies
View Related
Oct 30, 2008
When I link in an excel document to my model all parameters in that excel gets the unit (mm).
How can I change this? For instance I want some of the parameters to be an angle.
View 8 Replies
View Related
Feb 13, 2012
We have a whole bunch of spreadsheets that we use for calculations and parts of those spreadsheets are linked to a ton of CAD Drawings via data links.
We would like to be able to deliver the CAD drawings to the client without having to send our calculation books (just the output tables). In other words, is it possible to embed the table data and remove the excel link for the final delivery?
View 3 Replies
View Related
Feb 14, 2012
i'm trying to link excel to autocad for a time now. and until now it didn't work for me.
Everytime it says "1 data link(s) do not allow their data to be written out." thats when i try to write it to the excel file.
View 3 Replies
View Related
Nov 26, 2013
We have tremendous problem in our office while we open the CAD files which have linked to excel tables. It takes endless loading time if any computer has excell sheets opened. We use copy / paste special ( linked ) command to brought excel tables to the DWG files. OLE OBJECT command has worst result about linking excel sheets. How do we control ( link option) in this stution as linked versus unlinked?
View 1 Replies
View Related
Aug 9, 2010
I know that to design for example a 3d curve i have to import a XYZ data points from excel. What if i wanna link these points from excel to Inventors curve? Everytime i change the excel file i want my curve to be updated.
View 9 Replies
View Related
Feb 25, 2013
I am trying to link an excel spreadsheet to my acad but I can't see it once i've linked to it?
View 2 Replies
View Related
Sep 3, 2013
I am trying to use an iLogic Excel link to define the hub and bushing dimensions for a wing pulley part file. I get an error: GoExcel: Could not match the column title: "Size". I've attached the part file and Excel file. The iLogic rule in the part file is called Hub_Bushing.
View 9 Replies
View Related
Nov 1, 2012
When trying to insert a table linked to an Excel 2010 file, it works up until row 28, however, as soon as I add a 29th row to the table it no longer inserts the table. When I try and insert it, I press ok and nothing happens. I tried inserting it as a smaller table and changing the data link to a bigger range after it was inserted, it just didn't update to a larger range.
Is there a way of getting this to work without having to insert it as two different tables?
View 2 Replies
View Related
Oct 28, 2010
Is there a way to link any inventor file iproperties to a excel spreadsheet - so that the excel spreadsheet updates parametrically with any inventor iproperty changes.
I know that inventor parameters can be linked to excel, but what about i properties?
View 8 Replies
View Related
Jan 3, 2013
I had a bit of a search around the net and what I found mostly said it can't be done natively in AutoCad although I thought I might as well ask anyway.
I want to link individual mtext objects in AutoCad to cell contents in an Excel file (like a datalink for a table, but I can't use a table in this instance). Any thoughts?
If it is not possible it is not a huge deal although hopefully the design doesn't change in the future as it will be a pain to update all these manually
View 4 Replies
View Related
Apr 3, 2013
I'm trying to link a text from Autocad to an excel spreadsheet so that when changed in Excel, be changed in autocad.
After searching on some forums, I started doing database through ODBC.
I made a table in excel selecting and naming fields, added the file in windows OBDC manager, able to make the connection through dbConnect autocad, created label ...
Now I need to put the information in the database autocad text entity and already there I'm not getting more done
View 1 Replies
View Related
Oct 28, 2010
I want to link an excel sheet with a drawing, so changing the excel changes the drawing.
I used this awesome site to learn about going to Edit->Paste Special->Paste Link->AutoCAD Entities...but I don't have that choice. Just the one that makes the OLE image. While that will work, that is less than ideal. It appears in just normal paste, but not under paste link.
AutoCAD 2007, A.54; Excel 2003 SP3; Windows XP SP3.
View 9 Replies
View Related
Feb 14, 2012
I'm trying to link excel to autocad for a time now.
and until now it didn't work for me.
Everytime it says "1 data link(s) do not allow their data to be written out."
thats when i try to write it to the excel file.
View 5 Replies
View Related
Oct 10, 2013
We are a MEP firm, using AutoCAD 2011 and Excel 2007, and our project is a building with 1000+ rooms. Each room has specified supply and return airflows that need to show up in text in each of the rooms. All the airflow values are calculated in a spreadsheet.
My thought is to use fields in the text that shows up in each room, then link each field to a specific cell in Excel, because these values will be evolving over the next year.
View 2 Replies
View Related
Dec 23, 2013
I have made a data link to an excel file. Then I bring it in as a table. I then adjust the text height and remove all formatting from the table. Unfortunately, after closing and re-opening the file, the table changes. I lose formating/cell alignment/text height. It isn't even consistent across the table. The lost formatting is only on the 2nd split of the table, the first side retains the corrected formatting. I have selected the option to not update excel formatting. I don't even get a notification the table is updating. There haven't been any changes to the excel sheet either....
View 6 Replies
View Related
Oct 1, 2013
If I place a link to a dwg as a hyperlink in an Excel file, AutoCAD freezes. It opens the drawing, then AutoCAD is completely locked. I have to close it through task manager.
This has been tested wih multiple drawings and excel file and it happens in all of them. I'm using Excel 2010 and AutoCAD 2010.
Win7 x64 - 16gb ram
i7 3610qm
FirePro M4000
Inventor 2013
ETO 6.1
View 4 Replies
View Related
Jul 24, 2013
I want to link Microsoft Excel data with AutoCAD drawing (like dimension or values). When I made some changes in Excel data, value in AutoCAD drawing can be changes automatically.
View 1 Replies
View Related
Jul 19, 2012
way I can link my AutoCAD title block attributes to excel and make changes in either excel or AutoCAD and then be able to run an update? The attributes would be “REV” “DWG_NO” “TITLE” “LOCATION” “DRAWING_SIZE” and “FILE NAME”.
View 4 Replies
View Related
Jan 27, 2012
I would like to link a series of text lines in an autocad drawing to there corresponding fields in an excel sheet, I can not use tables in autocad because of the way other software uses the text in autocad. I have attached files of the text layout in acad and of the sheet in excel. One thing that keeps me from using tables in acad is that every line of text is on a different layer, with tables you can't control the layer of table its always on the current layer.
View 6 Replies
View Related
Oct 7, 2013
I am making an assembly where I wanted to use an excel sheet to link common paramters between the parts. I know how to do it for just my single system, but I am wanting to have all the parts and the excel sheet stored in my vault server. Is there anyway to link the parameter list to the excel file stored in the vault or how can I go about having a common file that everybody can access.
What I am worried about is if the excel file is located on my computer and someone tries to open a part on another machine, it will not find the excel parameters and everything crash.
View 4 Replies
View Related
Apr 6, 2011
How to fix a broken link to an excel table in an idw file general table?I changed the folder name and heirarchy of the project.i expected the idw tables to find their parent excel files in the same folder with a new name, but they didn't.
I could find nothing for fixing broken excel links.
View 4 Replies
View Related
Nov 12, 2013
Any way to create a dynamic link between the property set attached to a space and excel?
I have a lots of spaces that has a property set attached, some of this property changes often. So if it was possible to create a excel sheet that presents each property for each space and then I could change the property in excel and put it back to Architecture it would save me a lot of time.
View 1 Replies
View Related
Oct 21, 2013
I am using AutoCAD Mechanical 2013. (Full version).If there is SLD with different HP rating, tag names and different cable ferrule numbers, and if there is any small change in HP rating of motor or small change in tag name, then it is time consuming work for me to go to AutoCAD and change the text by referring Excel sheet.
Is there any way to link excel sheet to AutoCAD drawings? So i can take updated excel sheet and link it with AutoCAD and if there is any change in excel sheet then it will be updated in CAD file as well.If there is any setting or grid referencing to be made. I am ready to do the required changes to meet my requirement.
View 2 Replies
View Related
Apr 26, 2011
we recently were trying to import an excel table via data link function. Initially this works fine and the table appears in the drawing however when we want to break the link by deleting it in the data link table autocad tells me that the link is in use. We routinely do this in autocad mechanical 2010. The reason we do this is to be able to bring in the table and preserve formatting. How can we easily delete the data link in 2010 LT?
View 9 Replies
View Related
Apr 3, 2013
I tried to match the dimensions of the already existing product with new dimension through fx parameters(using link excel sheet), while conversion all the dimensions are changed except taper value (By default it comes with inch instead of degrees) It can be changed by adding user parameter but i want it to consider from excel sheet data itself. Is it possible? For reference i have attached the snap shots
View 1 Replies
View Related
Mar 24, 2011
As title says, I create a new Excel Data Link using "Data Link Manager" but it takes forever! If so, how can I get rid of waiting long time when creating/editing a Data Link?
View 0 Replies
View Related
Feb 1, 2013
I'm inserting a data link from excel into my CAD drawing and every time I try to select the table it brings in, the corner "grips" the green plus signs, are so huge they are bigger than my sheet and I can't see anything in the table. Any way to shrink them to a rational size?
View 2 Replies
View Related
May 5, 2011
I struggled for a while this morning with trying to data link to a large door schedule in Excel. After several failures, I searched online for answers, and read in another forum that AutoCAD won't data link to more than 2000 cells.
My door schedule is about 2050 cells now, and will be about 4000 when done. I defined a set of about 1,000 cells in the Excel spreadsheet, and AutoCAD linked to it no problem. So, I tend to believe the poster who stated the 2000 cell limit, but I can't find this.
View 1 Replies
View Related
Sep 18, 2012
I have an issue between XP 32 bit ACAD 2011 workstations and Windows 7 64 bit ACAD 2011 workstations...
1 - A Windows 7 user does a Paste Special>Paste Link>Microsoft Excel to insertembed a portion of an Excel worksheet into the DWG.
2 - various win7 and XP users make changes to the Excel worksheet directly in Excel
3 - Win7 users open the DWG to see the correct and updated Excel data in the DWG
4 - XP users open the same DWG to see OLD data from a previous save and not the correct updated data on the linked worksheet
5 - XP users directly open the Excel file in Excel and are able to view the correct updated data BUT NOT IN THE DWG
6 - XP users see old incorrect excel worksheet data in the DWG. Win7 users see the correct data in the DWG.
View 5 Replies
View Related
