AutoCAD Inventor :: ILogic - STL Translator Specific Parameters Info
Sep 11, 2013
I am looking for information on the option parameters, any documentation?
I found some code to query what parameters there are (Rule: GetTranslatorOptions), just not sure what the enumerations are for some.
Specifically: ExportUnits, Resolution
Using Rule:ExportSTL
I have changed the Export Units from 1 to 4 and do not see any change to the STL ASCII output.. not sure what this parameter does... Expected it to be an enumeration of the drop-down box that you see during "manual" exporting.
View 1 Replies
ADVERTISEMENT
May 21, 2012
I would like to have a rule that will add specific user parameters to a part file. These parameters need to be formatted so the width, depth and thickness will control the description of the part.
IE:
Width=4
Depth=2
Thickness=3/16
DESCRIPTION = TS <Width>X<Depth>X<Thickness>
I would like to format each parameter so that the:
Format=Fractional
Precision=1/16
Unit string=False
This is what I have so far:
oMyParameter=ThisApplication.ActiveDocument.ComponentDefinition.Parameters.UserParameters
oParameter=oMyParameter.AddByExpression("Width", "TOP_RAIL_WIDTH", UnitsTypeEnum.kInchLengthUnits)
oParameter.ExposedAsProperty=True
oParameter.Units="in"
[Code]...
The TOP_RAIL parameters are from a linked file.
View 9 Replies
View Related
Oct 9, 2013
I'm having some difficulties with iLogic and reference parameters.
I have made a tube with a weird shape and I want to measure the longest length. So I have to cut the tube in a certain angle in relation with the center to measure the length.
The problem is that this angle is really hard to calculate.
So I tried making a rule where I can make my angle shift x degree and then measure the longest length. If the measurement is larger the previous measurement the angle will shift x degree again until the measurement is smaller than the previous.
So I made my starting angle 0 degree, I know this is for a fact not the longest length. And then I tried this rule. (before making a While rule).
And I noticed that on screen the measurement changes. But the reference - parameter stays the same. So it gives me the measurement on the starting angle & after rotating it again gives me the starting angle.
How can I get the parameter to update itself in between?
Dim measurement_length As DoubleDim measurement_length2 As DoubleMessageBox.Show("Start angle ", "My iLogic Dialog", MessageBoxButtons.OK, MessageBoxIcon.Asterisk, MessageBoxDefaultButton.Button1)angle_measurement_spec = 0RuleParametersOutput()InventorVb.DocumentUpdate()measurement_length = [code].....
View 1 Replies
View Related
Feb 20, 2013
I would like to save parameters marked as Key to an XML-file (from an Inventor addin, VB.NET):
Dim addIn As ApplicationAddIn = m_inventorApp.ApplicationAddIns.ItemById("{3bdd8d79-2179-4b11-8a5a-257b1c0263ac}") 'iLogic addin addIn.Activate() Dim iLogicAddin As Object = addIn.Automation iLogicAddin.ParametersXmlSave(invDoc, "c: emp ext.xml", iLogicAddin.XmlSaveOption.KeysOnly)
This doesn't run: "Public member 'XmlSaveOption' on type 'iLogicAutomation' not found."
The documentation says:
Autodesk.iLogic.Interfaces.IiLogicAutomation.ParametersXmlSave(Inventor.Document,System.String,Autodesk.iLogic.Interfaces.XmlSaveOption)
What is the correct syntax to get the XmlSaveOption?
View 1 Replies
View Related
Mar 8, 2012
In the attached file there is a User Parameter, "Antal_ledekasser". Inventor has calculated its value to 2.
If you do the math by hand then you see the value should be 5.
Rebuild doesn't force recalculation.
There is an iLogic rule in the part, but this also fails to force recalculation:
iLogicVb.UpdateWhenDone=True
InventorVb.DocumentUpdate()
ThisDoc.Document.Rebuild2
ThisDoc.Document.Update2
Manual work around is to change the formula, then the value is recalculated.
iLogic work around is to change a parameter-value - and run the rule TWICE.
Question: How do I force a real rebuild, that actually wil recalculate parameter-values the first time I run the iLogic rule?
Background: The attached file is a little subset of the skeleton in a large assembly that is controlled by iLogic. The rules are placed in the topassembly, and writes vaules to the skeleton-file.
After writing values to skeleton-parameters I try to force them through with this iLogic
RuleParametersOutput()
InventorVb.DocumentUpdate()
iLogicVb.RunRule("Skeleton", "Update")
Later in the process I use calculated values to decide which components should be active. But my logic fails because my decisions are made on faulty values.
I did manage to get the updating work in 2011. But after migrating to 2012, it seems impossible to have it update correct. The user has to run rules several times, and doing manually updates to get a correct model.
View 2 Replies
View Related
May 21, 2013
I want to export reference parameters to an excel table using i-Logic
I found the function GoExcel.CellValues("filename.xls", "Sheet1", "A2", "A10") = MultiValue.List("d0")
It looks like the syntax calls for the file location and name if the xls file is not open and if open is not supposed to be required.
I have entered it both ways and with and with out the target file open and with the function GoExcel.Open("pathFilename.xls","sheet1") and continue to get the error:
we couldn't find C:AbellAbell VaultWorkSpaceDEVELOPMENTAC100-0100MRLTEST Table.xls. Is it possible it was moved, renamed or deleted?
Also, I was expecting that to fill in the sheet cell's would be MultiValue.List("d0","d1","d2")
but the system give me an error that says
Error on Line 3 : Overload resolution failed because no accessible 'List' accepts this number of arguments.
See below
GoExcel.Open("C:AbellAbell VaultWorkSpaceDEVELOPMENTAC100-0100MRLTEST Table.xls", "AC-100-0101003-TEST")GoExcel.CellValues("C:AbellAbell VaultWorkSpaceDEVELOPMENTAC100-0100MRLTEST Table.xls", "AC-100-0101003-TEST", "A2", "A10") = MultiValue.List("d194_A")GoExcel.Save
View 8 Replies
View Related
Jun 7, 2011
I am trying to enter some material ordering info into an external spreadsheet, and have that info reflected in a text box within an idw drawing file.
My method is as follows:
Obtain a numerical value (250) from an external Excel spreadsheet (sample.xlsx).Assign this value to a parameter (abc) in an idw file (Materials Ordering.idw).Insert parameter abc I made into a text box within the same idw file.
I made a set_parameters rule, and the ilogic text of the above example is as follows:
'Open File and Scan line - Part = Impeller Casing Flange
i = GoExcel.FindRow("sample.xlsx", "Sheet1", "Part", "<=", "Impeller Casing Flange")
'abc = Material Width
abc = GoExcel.CurrentRowValue("Material Width")
I had no problems with the first two steps, after checking the parameters I could see that parameter abc is being updated successfully.
However, I am having trouble with the third step. In the format text dialog box, I can see a drop box for components, but I can't find a reference to the idw file in there.
My question is, am I going the wrong way about this? Should I have assigned the parameters to a component instead of the idw file?
View 5 Replies
View Related
Aug 22, 2012
Working code ...... attaching file
Auto = iLogicVb.Automation
Dim iLogicAuto As Object
iLogicAuto = Auto
Dim oDoc As Document
oDoc = ThisApplication.ActiveDocument
[Code]...
'but now something more i wanna do is...... delete parameters
If Not (param Is Nothing) Then
For Each param In params
i = MessageBox.Show("Checking for Parameter in File")
i = MessageBox.Show("No.of Parameters exists are ="& param.count)
[Code]....
View 5 Replies
View Related
Jul 17, 2013
iLogic code question concerning how Place iLogic Component and retain the ability to push parameters from the subassemblies to the parts after being renamed.
I have ASSEMBLY.iam containing:
SUBASSEMBLY-01:1.iam
SUBASSEMBLY-02:1.iam
and sometimes SUBASSEMBLY-02:2.iam
each SUBASSEMBLY.iam contains PART1.ipt and PART2.ipt which have variable LENGTH and WIDTH. LENGTH and WIDTH are entered manually at the SUBASSEMBLY.iam and are infinitely variable.
To transfer the parameters I'm using iLogic code in the SUBASSEMBLY:
Parameter("PART1.ipt", "LENGTH")=LENGTHParameter("PART1.ipt", "WIDTH")=WIDTHParameter("PART2.ipt", "LENGTH")=LENGTHParameter("PART2.ipt", "WIDTH")=WIDTH
Issue 1: When I place the SUBASSEMBLY as an iLogic Component, the parts are renamed to PART1-01.ipt which renders my Parameter transfer useless. What am I missing on writing this code so it can find the new part name?
Issue 2: I like the automatic renaming that happens with Place iLogic Component. Is there a better way to handle this automatically through Place Component -> Save & Replace?
Inventor 2013
View 1 Replies
View Related
Aug 14, 2013
I have this little iLogic snippet that writes out the name and value of all parameters in active document.
doc = ThisDoc.Documentparams = doc.ComponentDefinition.Parametersnames = New List(Of String)values = New List(Of String)For Each param In paramsIf Len(param.Name)>4 Thennames.Add(param.Name)values.Add(param.Value.ToString)ElseEnd IfNextMultiValue.List("ParamsList") = namesMultiValue.List("ParamsValues") = valuesGoExcel.CellValues("COVER.DEFAULT.PARAMS.xlsx", "Sheet1", "A2", "A400") = MultiValue.List("ParamsList")GoExcel.CellValues("COVER.DEFAULT.PARAMS.xlsx", "Sheet1", "B2", "B400") = MultiValue.List("ParamsValues")GoExcel.SaveGoExcel.Close
The problem is it ignores the parameter's units and assumes cm for length and rad for angular. I need another nested IF - Then that says:
IF param.Values.'UnitType' is "in" THEN
param.Value = param.Value/2.54
Else If param.Values.'UnitType' is "deg" THEN
param.Value = param.Value*360/2/3.14159
End If
I just do not know the syntax or proper method.
View 1 Replies
View Related
Dec 26, 2013
Is there a way to work with parameters on a suppressed assembly using iLogic.Everything works fine, but when I suppressed a part ilogic rule give me an error: Parameter: The component named "xxxxx:1" was not found.
View 1 Replies
View Related
Apr 3, 2012
I want to import the parameters from the .ipt file into the .iam file using a rule from iLogic (unless there is another way to do it?)
I pinched the code from the example hand rail iLogic part that comes with inventor and tweaked it to suit. After inputting the code shown in the image, when I click OK I get a 'fatal error' of some sort.
View 6 Replies
View Related
Jun 12, 2013
Is there a standard command or command sequence that allows for the changing of a parameter, say length, of a component from within an assembly. I'm looking to compile a code that allows for a template to be created, then that template will do changes based on text box input and then save out the modified parts with new part numbers.
View 2 Replies
View Related
Aug 30, 2013
I need import all new params, rules and forms from a new template to older parts. I'm trying to use an external rule to create a new iproperties and import params from xml file but I can't assign these parameters with these iproperties.
I attach the code.
View 3 Replies
View Related
Aug 23, 2011
I would like to be able to use iLogic to get the value of the Comment field of a model's parameters. I have some text there that I would like to display in a sketched symbol. The attached image illustrates what I am seeking.
View 2 Replies
View Related
May 7, 2012
So far I can discover parameters and ilogic aren't possible in the definition of a drawing border.
How can fold lines be created in a border that can be used for multiple scales?
View 1 Replies
View Related
Oct 28, 2013
I have two user parameters saved in a part template that are tied to the part volume and an overall estimated part weight. The user parameter Pc_Volume is the volume in cubic feet and calculated by pulling the part mass (in cubic inches) and converting to cubic feet via ilogic rule. This is then automatically run via event triggers before a file is saved and if the part geometry has changed to keep the volume up to date. These are exported because they get pulled into iproperties of our drawing files as well as used to create a parts lists showing the volumes and weights.
I have the property formats of the user parameters set to Number and to unitless and the unit display turned off so it does not show on the parts list, with a precision of 0.000 for Pc_Volume. The Pc_Weight is set the same way however with a precision rounded to the nearest whole number.
These are created this way so when we use the part file as the template when we select "Make Components" to separate our parts and tie them to an assembly all the files are then updated and the information saved for exporting.
The problem is, the Pc_Volume always comes in rounded to a whole number. The Pc_Weight Does as well, but that doesn't bother me since we want it to do that anyway. If I would go into the part file after it's created, double check the precision and then re-run the rule the volume will show up with the correct precision in the exported parameters. I don't want to have to open each partfile however to get this to update.
Attached are images of the parameters, ilogic rule, and exported results.
View 2 Replies
View Related
Apr 30, 2012
i want to export my part list with ilogic in a excel template but dont want all the part list column and dont erase the column i skip in excel?
View 3 Replies
View Related
Mar 15, 2013
Is it possible to automatically divert Inventor to save to a specific folder within the workspace???
If a certain iProperty is set to yes, we want the user to save that file into a particular folder, if they try and save it elsewhere a message is popped up telling them an error has been made please try and save in the correct folder.
Admittedly I am not the most competant iLogic programmer but this is what I have thus far
Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 5388 StartFragment: 314 EndFragment: 5356 StartSelection: 314 EndSelection: 314
SyntaxEditor Code Snippet
WorkspacePath=ThisDoc.WorkspacePath()
DrawingPath="C:Live WorkSpaceDesigns3D Designs3D Drawings"
[Code] .......
View 4 Replies
View Related
Aug 31, 2011
I want to change 'mutil value select" to "custom value input" in ilogic user parameters. something like this:
if condition A then
multivalue.setlist("length", 1,2,3,4,5)
else
(users can enter any value they want, how can i remove the list first and set it to custom value input?)
View 2 Replies
View Related
Oct 3, 2013
I have a symbol that when I insert it into my dwg, I would like it to trigger a rule to create custom properties and fill out those properties. Ive already created a rule that is 100% working, I am just curious if its possible to have that rule triggered when I insert a specific symbol?
View 3 Replies
View Related
Oct 4, 2012
I am looking to apply a set part number iproperty to the first, then second, then third components in the assembly browser tree in my iLogic rule, regardless of their current part number. (I need to select them by their position in the browser tree as their part number will vary). How do I do this?
View 1 Replies
View Related
Dec 13, 2012
I am completely new to ilogic but would like to make a rule in my idw file that change the hatch pattern in a section of a specific material.
Short Version:
I have an aluminum extrusion part. Material is set to Aluminum-6061. In any section view of this part I want the hatch to be ANSI 31 with a rotation of 45 degrees and a scale of .02 How do I do this?
View 1 Replies
View Related
Jun 24, 2013
Can not get the PDF translator Add-In
Trying to export a PDF with PDF translator. Using sample "Save as PDF Translator Sample" from programers.
Getting error "Unspecified error (Exception from HRESULT: 0x80004005 (E_FAIL))" with
Dim PDFAddIn As TranslatorAddIn = ThisApplication.ApplicationAddIns.ItemById("{0AC6FD96-2F4D-42CE-8BE0-8AEA580399E4}")
Tried on another system with same results. Can get other translators with ItemById. Can export PDF manually.
Inventor 2014, Visual Studios 2012
View 9 Replies
View Related
May 24, 2013
When I am done with a drawing (inventor .dwg), I manually go to "Save Copy As" and select DXF, and using my default options, save the drawing as a DXF on a server (OUTSIDE of vault) that our shop guys can access for CNC stuff. I understand there is a DXF Translator that I may be able to set to do this for me. How to use Inventor add-ins (my translator is loaded, thats as far as I got) or set them as macros. A button on the ribbon to export to DXF would be nice and I may also want to automate this further and have it do it on file save.
View 9 Replies
View Related
Jun 18, 2009
Is it possible to use the DXF Translator Addin to export a sketch?
I've managed to export a sketch using the DataIO mechanism, but I need to be able to export the DXF in an older file version than 2010. Is there any way to specifiy the version to export to using the DataIO mechanism?
View 9 Replies
View Related
Aug 28, 2013
I am working with inventor 2014 professional now. But There is a problem. it is ( a: 2d translator not installed and b:sketch export failed ) . dxf drawings of sheet metal environment, particularly these problems started recording format.
View 3 Replies
View Related
Oct 11, 2011
I am trying to import my MDT 2009 (SP3) files into Inventor 2012 (SP1) but I get the error in the subject line.
View 9 Replies
View Related
Feb 21, 2012
I have a problem I haven't found an answer to in any CAD documents, books of forums. I would like to create:
a) a continuous line that begins and ends with space or a shape
b) a line (of any type) that has text (i.e. shape) imbedded exactly in the middle (no matter how long a line is) or at equal intervals (e.g. each 1/3 of the line)
Is there any chance linetypes like that can be created or will I need to resort to lisp and trimming/breaking the lines once drawn?
The problem is related to cartographic symbols defined by the State Geodetic Administration.
View 5 Replies
View Related
Mar 12, 2009
Since CS4 came out I'm using Vista64 a lot more. One thing I noticed recently has me a bit curious if it's a unique bug in my install or whether it's "normal"..
When I right-click on install files, I don't see a 'Version' tab like I used to see with XP. For example, under XP, when I right-click the recent ACR update (Camera Raw.8bi) I see under the Version tab that it's "Written by: Thomas Knoll of Adobe Systems Inc, the version number, its 'internal name, language, etc.."
In Vista Right-Click-> Properties tab offers 'General', 'Digital Signatures', 'Security' and 'Details'. The 'Details' tab does not offer any of this info. It's a bit of bother to not be able to verify the version of a file before installing it.
Am I missing something or are there Vista specific file info tags that Adobe is not providing?
View 15 Replies
View Related
Dec 13, 2013
I'm working on a dynamic door, that has specific parameters to change its size and orientation. Everything works pretty good, only the arc for the door won't react the way I want it.
View 8 Replies
View Related
