AutoCAD Inventor :: Mechanical Desktop Part / Assembly Translator Not Registered
Oct 11, 2011I am trying to import my MDT 2009 (SP3) files into Inventor 2012 (SP1) but I get the error in the subject line.
View 9 Replies
ADVERTISEMENT
AutoCAD Inventor :: Translation Of DWG - Mechanical Desktop Must Be Installed
May 1, 2013I am using inventor 2012 and am trying to import my MDT(2002) drawings but when I try the translation process I receive an error message that says Mechanical Desktop must be installed. I currently of both Inventor and MDT installed and both operate correctly.
View 4 Replies View RelatedAutoCAD Inventor :: How To Translate Model From Mechanical Desktop
Aug 25, 2013How to Translate the model from Mechanical Desktopt in Inventor 2014.
Program requires installed mechanical desktop.
How to tranalate without having mechanical desktop?
AutoCAD Inventor :: Export From Autodesk 8 To Mechanical Desktop 2004?
Jan 23, 2013I have a drawing that was sent to me using Autodesk inventor 8 but I want to add it to a drawing I have already started in Mechanical Desktop 2004 is there any way to export the drawing into a format that can be opened by Mechanical Desktop 2004?
View 1 Replies View RelatedAutoCAD Inventor :: Converting Step Files For Mechanical Desktop?
Feb 7, 2012I have a problem with some step files I recieved from a vendor for an assembly. Basically what is happening is I download the step file. Then bring it into Mechanical Desktop. When brought into Mechanical desktop, it is downloaded in metric where my entire assembly is in standard/english format. What I did when I had Inventor 2011 is bring the step file into inventor, go to document settings and switch the unit to inch from mm. Then save the step file and when I brought it into Mechanical desktop it was in the correct unit and scale.
Now with 2012 Inventor, when I bring the step file in, it is automatically in english/standard format. So I save the step file out and try to open it in Mechanical desktop only to have the file back into mm and 25.4x the actual size it should be.
how to save the step file out like in 2011 to make sure the unit is saved in the correct format. This is extremely aggrevating and waste of time. I would have had the part reverse engineered by now if i quit trying to use the vendors standard step files.
This problem doesn't only happen with a certain vendor's drawings either, it goes for all step files I have recieved since getting Inventor2012.
AutoCAD Inventor :: Can Mechanical Desktop 2009 Be Installed With 2013
Jul 9, 2013Can Mechanical Desktop 2009 be installed with Inventor 2013?
View 5 Replies View RelatedAutoCAD Inventor :: Mechanical Desktop 2013 Error At The Start Of Application
Apr 27, 2013When I start the subject application, I experience delay in opening the program & error as attached appars on sreen.
View 1 Replies View RelatedAutoCAD Inventor :: 2009 Crashing When Translating Mechanical Desktop Files
Dec 22, 2011.My Inventor2009 keep crashing everytime i'm trying to traslate/import Mech. Desktop2009 files....Windows7 is my os platform. Done all latest SP both for Inventor & Mech Desktop.
View 1 Replies View RelatedAutoCAD 2013 :: How To Import Mechanical Desktop 2009 Files Into Inventor 2012
Sep 23, 2013how to import Mechanical Desktop 2009 files into Inventor 2012
View 1 Replies View RelatedAutoCad :: Get FEA Box To Appear In Ribbon In Mechanical Desktop?
Jul 7, 2013how to get the FEA box to appear in the ribbon in Mechanical Destop?
View 7 Replies View RelatedAutoCAD Inventor :: Part Inserted In Assembly File As Tube And Pipe Run Part?
Mar 28, 2012Dear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
View 3 Replies View RelatedAutoCAD Inventor :: ILogic Rule For Each Part In Assembly To Change Part Parameter
Apr 1, 2013I`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub
AutoCAD Inventor :: Simplified Part - Assembly Won't Merge Into One Seamless Part
Dec 11, 2013I would like to simplify this assembly into one seamless part for FEM calculation:The assembly consists out of parts that, in reality, will be welded together. Due to their form, there is no way to place them exactly onto each other, therefore there are slight gaps between the parts:
Now when I try to merge the assembly into one part via "simplify" --> "create simplified part" and choose "single solid body with seams between planar faces merged", Inventor does not fill these gaps (even though it displays only one part in the bottom right corner of my window). Unfortunately, the remaining gaps brings "contact" problems in the FEM simulation.
how to close the gaps and really merge the assembly into one part?
AutoCAD Inventor :: Part Created In Assembly Does Not Update To Part File
Nov 15, 2013New user 2014
Part created in assembly does not update to part file.
AutoCAD Inventor :: Can Part Make Alterations To Other Part When Inserting In Assembly
Mar 29, 2012I have a part that has protrusions. When i mate that part up to another part that second part needs to have cutouts/holes to receive those protrusions.
i mainly use it in sheetmetal parts. and use the rectangular protrusions on de contour to mate up with corresponding cutouts in the other sheet. this works with positioning and also makes for a nice weld spot/area.
But also for making holes to accommodate a mold pin used in custom punch dies. I want the intervening part to receive a corresponding (propperly tolleranced) hole automatically. Much like a bolted connection does.
same for parts like circlips. i want them to automatically generate the seat in the part it's mated to. Rather than using the axle generator.
Ofcourse one can place the parts and do an in assembly interpart projection and go from there, but i want the part to generate the (predifined) modification to the other part. It would save time and also reduces problems as the parts are moved about or even removed.
AutoCAD Inventor :: Find Mass Of A Part At Its Part And Assembly Level
Jul 1, 2013I have an assembly with 10 parts in it. We use many assembly features at the assembly level (Revolve cut, Extrusion cut..etc). How to find the mass difference of each part by comparing at its parts level and its assembly level.
View 1 Replies View RelatedAutoCAD Inventor :: CoG Needed For Each Sub Assembly In A 2 Part Assembly On An IDW
Oct 3, 2013I have a two part duct fire damper assembly. The IDW has the combined two part assembly, which I know how to turn the CoG on, so that it can be dimensioned. The problem is each piece will more than likely be hoisted separately so I would like to show the CoG for each piece, not the combined master assy.is there a way to do this?
Inventor 2014
Windows 7 Pro SP1
Intel(R) Core(TM) i7-3770k CPU @ 3.50GHz
16GB RAM
NVIDIA Quadro 4000
3D Connexion SpaceMouse Pro
AutoCAD Inventor :: Find Part Which Is Inside Another Part Or Assembly?
Aug 20, 2013If I want to find part which is inside another part or assembly, which means no matter how I turn camera, I always cannot see that part.
Does inventor has this function? Or is it possible to develope by .NET API?
AutoCAD Inventor :: Project Sketch From Part To Another Part In Assembly?
Feb 7, 2013I can't seem to find how to use the Inventor 2012 API to project an entire sketch profile from one .ipt to another .ipt file from within an .iam file.
i7-2720QM Dell Precision M6600, Win 7 Pro 64-bit, 8GB RAM
Autodesk Product Design Suite Ultimate 2013
Autodesk Vault Professional 2013
AutoCAD Inventor :: Mirrored Part Gets New Part Number In Assembly
Dec 3, 2013Why when I mirror a part in an assembly the mirrored part gets a new part number? I want to mirror only the position of the part which is always the same part. Is it possible to do that in Inventor?
View 7 Replies View RelatedAutoCAD Inventor :: Cannot Get The PDF Translator Add-In
Jun 24, 2013Can not get the PDF translator Add-In
Trying to export a PDF with PDF translator. Using sample "Save as PDF Translator Sample" from programers.
Getting error "Unspecified error (Exception from HRESULT: 0x80004005 (E_FAIL))" with
Dim PDFAddIn As TranslatorAddIn = ThisApplication.ApplicationAddIns.ItemById("{0AC6FD96-2F4D-42CE-8BE0-8AEA580399E4}")
Tried on another system with same results. Can get other translators with ItemById. Can export PDF manually.
Inventor 2014, Visual Studios 2012
AutoCAD Inventor :: DXF Translator Macro
May 24, 2013When I am done with a drawing (inventor .dwg), I manually go to "Save Copy As" and select DXF, and using my default options, save the drawing as a DXF on a server (OUTSIDE of vault) that our shop guys can access for CNC stuff. I understand there is a DXF Translator that I may be able to set to do this for me. How to use Inventor add-ins (my translator is loaded, thats as far as I got) or set them as macros. A button on the ribbon to export to DXF would be nice and I may also want to automate this further and have it do it on file save.
View 9 Replies View RelatedAutoCAD Inventor :: Get Assembly Name From Part?
May 8, 2013I am in Inventor customization using VB.net as development language.
There is one issue which is troubling me from some time.
Is it possible to identify the name of parent assembly of part/sub-assembly.
For Instance there is a Sub-Assembly/Part, how can i identify the parent assembly using VB.net without opening that assembly.
AutoCAD Inventor :: Change Part Within Assembly
Oct 1, 2013I have an assembly of stair made from steel. There are lots of part the same. Is there a way to make a hole (inside assembly) to one and that hole would appear on all of them.
And another problem, how can I made cut (inside assembly) through more then one part so that would affect a part also when I open it alone.
AutoCAD Inventor :: Replace Assembly With Part
Oct 6, 2012I am capturing a book-case design that I made long ago into Intentor. I am almost finished, and I want to produce .dwg files and a bill of materials of parts that can be held.
For various reasons, almost all the items in the existing design are assemblies, and the underlying parts correspond more or less to half of physical parts that are contained inside a repeating cell. I will almost certainly continue using this approach.
A simplified design that shows this is at [URL]..... in the file Display.iam
I created the file Slat.ipt by using derive (Slat.iam).
If I replace the Slat assemblies with the file Slat.ipt, the bill of materials will show parts that correspond to physical parts that I can hold in my hand, or list on an invoice. I can do this with many, many mouse operations.
To make this modification quickly, I attempted to do Component -> replace on the Slat assembly. I use this operation a lot to replace one version of an assembly with another. When I do it with a .ipt file, the system pauses for some tens of seconds, then crashes.
A brute force work around is to use the mouse to do the replacement, essentially rebuilding the entire project in place.
AutoCAD Inventor :: Placement Of A Part In Assembly?
Sep 27, 2013When i create a part in an assembly, i select a plane or face with the cursor, but then i select again a plane for the sketch.
Why this double selection, and what does the first selection do, if the part is actually sketched on the plane i selected in the second time.
AutoCAD Inventor :: New Part Or Assembly Numbering?
May 28, 2013Normally you start with new models/assemblies/and drawings when you use the templates the naming by default is part1.ipt, assembly1.iam, drawing1.idw
I am currently at part431.ipt and assemby57.iam
I am concerned I may eventually reach part1000.ipt LOL
Currently using Inventor2012.
AutoCAD Inventor :: Transparent Part For An Assembly
Aug 1, 2013as you can see from the image, the blue cone isnt transparent. i set the material properties to "clear blue" to make it "see through", i want to show whats under the cone. however the cone isnt transparent. how can i get the cone to be transparent? is there a step im missing?
View 7 Replies View RelatedAutoCAD Inventor :: Find Part In Assembly From BOM
Nov 25, 2013I've created a BOM of parts from a large assembly and it has an item just listed as pt.1.
View 9 Replies View RelatedAutoCAD Inventor :: Part Colours In An Assembly
Sep 14, 2012I have a part that is inserted in an assembly. If I change the color of certain portions of the part it isn't reflected in the assembly.
View 5 Replies View RelatedAutoCAD Inventor :: Edit Part In Assembly
Mar 26, 2012I have written a program where i will copy inventor assembly tree to custom form in tree format. Now my problem is whenever i click a part in tree i must edit the part. I am trying to access the Fx parameter/IAssembly to use it but not getting desired results .
View 8 Replies View Related